# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id:
http://devicetree.org/schemas/spi/spi-pl022.yaml#
$schema:
http://devicetree.org/meta-schemas/core.yaml#
title: ARM PL022 SPI controller
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
allOf:
- $ref: spi-controller.yaml#
- $ref: /schemas/arm/primecell.yaml#
# We need a select here so we don't match all nodes with 'arm,primecell'
select:
properties:
compatible:
contains:
const: arm,pl022
required:
- compatible
properties:
compatible:
items:
- const: arm,pl022
- const: arm,primecell
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 2
clock-names:
items:
- const: sspclk
- const: apb_pclk
pl022,autosuspend-delay:
description: delay in ms following transfer completion before the
runtime power management system suspends the device. A setting of 0
indicates no delay and the device will be suspended immediately.
$ref: /schemas/types.yaml#/definitions/uint32
pl022,rt:
description: indicates the controller should run the message pump with realtime
priority to minimise the transfer latency on the bus (boolean)
type: boolean
dmas:
description:
Two or more DMA channel specifiers following the convention outlined
in bindings/dma/dma.txt
minItems: 2
maxItems: 32
dma-names:
description:
There must be at least one channel named "tx" for transmit and named "rx"
for receive.
minItems: 2
maxItems: 32
additionalItems: true
items:
- const: rx
- const: tx
resets:
maxItems: 1
required:
- compatible
- reg
- interrupts
unevaluatedProperties: false
examples:
- |
spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 31 0x4>;
dmas = <&dma_controller 23 1>,
<&dma_controller 24 0>;
dma-names = "rx", "tx";
flash@1 {
compatible = "st,m25p80";
reg = <1>;
spi-max-frequency = <12000000>;
spi-cpol;
spi-cpha;
pl022,interface = <0>;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x11>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
};
...
