Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  nsIPermissionManager.idl   Sprache: unbekannt

 
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

/**
 * This file contains an interface to the Permission Manager,
 * used to persistenly store permissions for different object types (cookies,
 * images etc) on a site-by-site basis.
 *
 * This service broadcasts the following notification when the permission list
 * is changed:
 *
 * topic  : "perm-changed" (PERM_CHANGE_NOTIFICATION)
 *          broadcast whenever the permission list changes in some way. there
 *          are four possible data strings for this notification; one
 *          notification will be broadcast for each change, and will involve
 *          a single permission.
 * subject: an nsIPermission interface pointer representing the permission object
 *          that changed.
 * data   : "deleted"
 *          a permission was deleted. the subject is the deleted permission.
 *          "added"
 *          a permission was added. the subject is the added permission.
 *          "changed"
 *          a permission was changed. the subject is the new permission.
 *          "cleared"
 *          the entire permission list was cleared. the subject is null.
 */

#include "nsISupports.idl"

interface nsIPrincipal;
interface nsIPermission;

[scriptable, builtinclass, uuid(4dcb3851-eba2-4e42-b236-82d2596fca22)]
interface nsIPermissionManager : nsISupports
{
  /**
   * Predefined return values for the testPermission method and for
   * the permission param of the add method
   * NOTES:
   *
   * UNKNOWN_ACTION (0) is reserved to represent the
   * default permission when no entry is found for a host, and
   * should not be used by consumers to indicate otherwise.
   * If no other entries are found, it translates into "prompt"
   * in the permissions.query() API.
   *
   * PROMPT_ACTION (3) is not persisted for most permissions.
   * Except for camera and microphone, where persisting it means
   * "Always Ask" (the user leaves "☐ Remember this decision"
   * unchecked in the permission grant). It translates into
   * "granted" in permissions.query() to prevent websites from
   * asking users to escalate permissions further.
   *
   * MAX_VALID_ACTION is the highest value (used to validate prefs)
   */
  const uint32_t UNKNOWN_ACTION = 0;
  const uint32_t ALLOW_ACTION = 1;
  const uint32_t DENY_ACTION = 2;
  const uint32_t PROMPT_ACTION = 3;
  const uint32_t MAX_VALID_ACTION = 3;

  /**
   * Predefined expiration types for permissions.  Permissions can be permanent
   * (never expire), expire at the end of the session, or expire at a specified
   * time. Permissions that expire at the end of a session may also have a
   * specified expiration time.
   *
   * EXPIRE_POLICY is a special expiration status. It is set when the permission
   * is set by reading an enterprise policy. These permissions cannot be overridden.
   */
  const uint32_t EXPIRE_NEVER = 0;
  const uint32_t EXPIRE_SESSION = 1;
  const uint32_t EXPIRE_TIME = 2;
  const uint32_t EXPIRE_POLICY = 3;


  /**
   * Get all custom permissions for a given nsIPrincipal. This will return an
   * enumerator of all permissions which are not set to default and which
   * belong to the matching principal of the given nsIPrincipal.
   *
   * @param principal  the URI to get all permissions for
   */
  Array<nsIPermission> getAllForPrincipal(in nsIPrincipal principal);

  /**
   * Get all custom permissions of a specific type, specified with a prefix
   * string.  This will return an array of all permissions which are not set to
   * default.  Also the passed type argument is either equal to or a prefix of
   * the type of the returned permissions.
   *
   * @param prefix  the type prefix string
   */
  Array<nsIPermission> getAllWithTypePrefix(in ACString prefix);


  /**
   * Get all custom permissions whose type exactly match one of the types defined
   * in the passed array argument.
   * This will return an array of all permissions which are not set to default.
   *
   * @param types  an array of case-sensitive ASCII strings, identifying the
   *               permissions to be matched.
   */
  Array<nsIPermission> getAllByTypes(in Array<ACString> types);

  /**
   * Get all custom permissions of a specific type and that were modified after
   * the specified date. This will return an array of all permissions which are
   * not set to default.
   *
   * @param type    a case-sensitive ASCII string, identifying the permission.
   * @param since   a unix timestamp representing the number of milliseconds from
   *                Jan 1, 1970 00:00:00 UTC.
   */
  Array<nsIPermission> getAllByTypeSince(in ACString type, in int64_t since);

  /**
   * Add permission information for a given principal.
   * It is internally calling the other add() method using the nsIURI from the
   * principal.
   * Passing a system principal will be a no-op because they will always be
   * granted permissions.
   */
  void addFromPrincipal(in nsIPrincipal principal, in ACString type,
                        in uint32_t permission,
                        [optional] in uint32_t expireType,
                        [optional] in int64_t expireTime);

  /**
   * Test method to add a permission for a given principal with custom modification time.
   */
  void testAddFromPrincipalByTime(in nsIPrincipal principal, in ACString type,
    in uint32_t permission,
    in int64_t modificationTime
  );

  /**
   * Add permanent permission information for a given principal in private
   * browsing.
   *
   * Normally permissions in private browsing are cleared at the end of the
   * session, this method allows you to override this behavior and set
   * permanent permissions.
   *
   * WARNING: setting permanent permissions _will_ leak data in private
   * browsing. Only use if you understand the consequences and trade-offs. If
   * you are unsure, |addFromPrincipal| is very likely what you want to use
   * instead.
   */
  void addFromPrincipalAndPersistInPrivateBrowsing(in nsIPrincipal principal,
                                                   in ACString type,
                                                   in uint32_t permission);

  /**
   * Add temporary default permission information for a given principal.
   * This permission will be cleared at the end of the session, will not be
   * stored on disk, and will not be set if a conflicting (non-default)
   * permission already exists.
   *
   * This function shouldn't be used by regular permission manager consumers and
   * is only expected to be called by the RemotePermissionService.sys.mjs for
   * the purpose of importing default permissions from remote settings.
   */
  void addDefaultFromPrincipal(in nsIPrincipal principal,
                               in ACString type,
                               in uint32_t permission);

  /**
   * Remove permission information for a given principal.
   * This is internally calling remove() with the host from the principal's URI.
   * Passing system principal will be a no-op because we never add them to the
   * database.
   */
  void removeFromPrincipal(in nsIPrincipal principal, in ACString type);

  /**
   * Remove the given permission from the permission manager.
   *
   * @param perm   a permission obtained from the permission manager.
   */
  void removePermission(in nsIPermission perm);

  /**
   * Clear permission information for all websites.
   */
  void removeAll();

  /**
   * Clear all permission information added since the specified time.
   */
  void removeAllSince(in int64_t since);

  /**
   * Clear all permissions of the passed type.
   */
  void removeByType(in ACString type);

  /**
   * Clear all permissions not of the passed types.
   */
  void removeAllExceptTypes(in Array<ACString> typeExceptions);

  /**
   * Clear all permissions of the passed type added since the specified time.
   * @param type    a case-sensitive ASCII string, identifying the permission.
   * @param since   a unix timestamp representing the number of milliseconds from
   *                Jan 1, 1970 00:00:00 UTC.
   */
  void removeByTypeSince(in ACString type, in int64_t since);

  /**
   * Clear all permissions of the passed types added since the specified time.
   * @param since   a unix timestamp representing the number of milliseconds from
   *                Jan 1, 1970 00:00:00 UTC.
   * @param typeExceptions    a array of case-sensitive ASCII strings, identifying
   *                          the types to not remove.
   */
  void removeAllSinceWithTypeExceptions(in int64_t since, in Array<ACString> typeExceptions);

  /**
   * Test whether the principal has the permission to perform a given action.
   * System principals will always have permissions granted.
   * This function will perform a pref lookup to permissions.default.<type>
   * if the specific permission type is part of the whitelist for that functionality.
   */
  uint32_t testPermissionFromPrincipal(in nsIPrincipal principal,
                                       in ACString type);

  /**
   * Test whether the principal has the permission to perform a given action.
   * This requires an exact hostname match. Subdomain principals do not match
   * permissions of base domains.
   * System principals will always have permissions granted.
   * This function will perform a pref lookup to permissions.default.<type>
   * if the specific permission type is part of the whitelist for that functionality.
   */
  uint32_t testExactPermissionFromPrincipal(in nsIPrincipal principal,
                                            in ACString type);

  /**
   * Test whether a website has permission to perform the given action
   * ignoring active sessions.
   * System principals will always have permissions granted.
   * This function will perform a pref lookup to permissions.default.<type>
   * if the specific permission type is part of the whitelist for that functionality.
   *
   * @param principal the principal
   * @param type      a case-sensitive ASCII string, identifying the consumer
   * @param return    see add(), param permission. returns UNKNOWN_ACTION when
   *                  there is no stored permission for this uri and / or type.
   */
  uint32_t testExactPermanentPermission(in nsIPrincipal principal,
                                        in ACString type);

  /**
   * Get the permission object associated with the given principal and action.
   * @param principal The principal
   * @param type      A case-sensitive ASCII string identifying the consumer
   * @param exactHost If true, only the specific host will be matched.
   *                  If false, base domains of the principal will also
   *                  be searched.
   * @returns The matching permission object, or null if no matching object
   *          was found. No matching object is equivalent to UNKNOWN_ACTION.
   * @note Clients in general should prefer the test* methods unless they
   *       need to know the specific stored details.
   * @note This method will always return null for the system principal.
   */
  nsIPermission getPermissionObject(in nsIPrincipal principal,
                                    in ACString type,
                                    in boolean exactHost);

  /**
   * Returns all stored permissions.
   * @return an array of nsIPermission objects
   */
  readonly attribute Array<nsIPermission> all;

  /**
   * Remove all permissions that will match the origin pattern.
   * @param patternAsJSON    Origin pattern to match.
   * @param typeInclusions   Types to include in search. If empty, includes all types.
   * @param typeExceptions   Types to skip in search.
   */
  void removePermissionsWithAttributes(in AString patternAsJSON, in Array<ACString> typeInclusions, in Array<ACString> typeExceptions);
};

%{ C++
#define NS_PERMISSIONMANAGER_CONTRACTID "@mozilla.org/permissionmanager;1"

#define PERM_CHANGE_NOTIFICATION "perm-changed"
%}

[ Dauer der Verarbeitung: 0.16 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge