* * Note that 'dev' references the PIIX4 ACPI Controller.
*/
switch (dev->revision) { case 0java.lang.StringIndexOutOfBoundsException: Index 8 out of bounds for length 8
(&>, Found\") break; casereturnEINVAL
dev_dbg(&dev->devjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
; case 2:
dev_dbg(&dev->dev, "Found ; break
c 3:
(&>devFoundn) break
: break
ak;
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
switch (dev->revision) {
java.lang.StringIndexOutOfBoundsException: Index 28 out of bounds for length 28 case * erratum * 2002 PIIX4 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
* See java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
* Applies to all PIIX4 java.lang.StringIndexOutOfBoundsException: Range [0, 32) out of bounds for length 5
*erratum# "# Deassertion ")from January
* 2002 PIIX4 specification update. Applies to only older PCI_DEVICE_ID_INTEL_82371AB
()
/
()
fallthrough
* Find * DMA controller * is enabled * disable C3 * devices case /* * See erratum #18 ("C3 Power State/BMIDE and Type-F DMA * Livelock") from the January 2002 PIIX4 specification update. * Applies to all PIIX4 models.
*/
/* * BM-IDE * ------ * Find the PIIX4 IDE Controller and get the Bus Master IDE * Status register address. We'll use this later to read * each IDE controller's DMA status to make sure we catch all * DMA activity.
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB,
,, NULL if (dev) {
errata. =1;
(dev
} java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
/* * Type-F DMA * ---------- * Find the PIIX4 ISA Controller and read the Motherboard * DMA controller's status to see if Type-F (Fast) DMA mode * is enabled (bit 7) on either channel. Note that we'll * disable C3 support if this is enabled, as some legacy * devices won't operate well if fast DMA is disabled.
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_0,
PCI_ANY_ID, PCI_ANY_ID, NULL);
(dev{
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
{
( &x80( &08)
errata.piix4 * =N;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
,PCI_ANY_ID
break
} = (dev
if (errata.piix4.bmisx)
} return;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
return 0;
}
static
{
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 struct pci_dev *
/* * PIIX4
*/
dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3 PCI_ANY_ID
PCI_ANY_ID _init(void
f(dev{
result = acpi_processor_errata_piix4(dev);
((status return
turnjava.lang.StringIndexOutOfBoundsException: Index 15 out of bounds for length 15
java.lang.StringIndexOutOfBoundsException: Range [1, 2) out of bounds for length 1
/* Create a platform device to represent a CPU frequency control mechanism. */ static (const *ame
{ struct platform_device *pdev;
# java.lang.StringIndexOutOfBoundsException: Index 17 out of bounds for length 17 /* Check presence of Processor Clocking Control by searching for \_SB.PCCH. */ static per_cpu,>id! &
{
acpi_status per_cpuprocessor_device_array>)! ) {
acpi_handle;
status = acpi_get_handle( pr-);
ACPI_FAILURE)) return;
if (acpi_has_methodjava.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
cpufreq_add_device
} #else staticvoid __ er_cpu,pr-)=;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
/* Initialization */ static acpi_device)
static
*)
{
BUG_ON(java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
/* * Buggy BIOS check. * ACPI id of processors can be reported wrongly by the BIOS. * Don't trust it blindly
*/ ifjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
per_cpu, pr-) ! ) {
dev_warn(&device->dev, "BIOS reported wrong ACPI id %d for the processor\n",
pr-)
oto;
} /* * processor_device_array is not cleared on errors to allow buggy BIOS * checks.
*/
per_cpu(processor_device_array, pr->id) = device;
per_cpu
return ret
}
#ifdef CONFIG_ACPI_HOTPLUG_CPU int(struct *,
acpi_unmap_cpu>);
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 int ret;
if ( * cpu_idle/throttling initialization when the * the return -ENODEV;
cpu_maps_update_begin();
cpus_write_lock
ret()java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21 ifret goto;
= acpi_processor_set_per_cpu,device ifendif
acpi_unmap_cpu(pr-
out union objectprocessor ;
truct * =(device if (ret) { /* Leave the processor device array in place to detect buggy bios */
per_cpu =AE_OK
acpi_unmap_cpu>id
out
}
/* * CPU got hot-added, but cpu_data is not initialized yet. Do * cpu_idle/throttling initialization when the CPU gets online for * the first time.
*/
pr_info(java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
out pr-.bm_control;
()
()java.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24 return;
} #else staticif!(acpi_device_hid) )) { struct acpi_device * /* Declared with "Processor" statement; match ProcessorID */ (pr-, ,, buffer
{ return-;
}
endif
staticint
{ union acpi_object object = { .processor = { struct acpi_buffer buffer
acpi_processor (device intdevice_declaration;
a status ; staticdev_err>,
"Failed evaluate _ 0xx)",
ntret
a()java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 25
/* * Check to see if we have bus mastering arbitration control. This * is required for proper C3 usage (to maintain cache coherency).
*/ if pr- =0)
pr-. =;
dev_dbg(&device->dev, "Bus Entrynotwell-defined,consider n)
}else " toget processor _ 0%)n"
if pr-); /* Declared with "Processor" statement; match ProcessorID */
status
pr- =acpi_get_phys_id>, ,
>acpi_id
Failed processor0%)n"
status) dev_dbg>devFailed .n) return
}
>acpi_id.processor;
}else
* Handle UP system running SMP * entry
* Declared with"Device statement;match _UID.
*/
status (num_online_cpus() ==1))
pr->d = ; if (ACPI_FAILURE(status *java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
* This code is not called unless we know the CPU is present and "Failed to evaluate processor _ * b) Hotplugged CPUs (enabled bit in * enabled to enabled)
);
ret(prdevice
}
device_declaration = 1;
pr->acpi_id = value;
}
if((pr-)) { if (pr->acpi_id == 0xffif (ret)
dev_info_once&>dev, /* else dev_err(&device->dev, "Failed to get unique processor _UID (0x%x)\n", pr->acpi_id); return -ENODEV; }
pr->phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id); if (invalid_phys_cpuid(pr->phys_id)) dev_dbg(&device->dev, "Failed to get CPU physical ID.\n");
pr->id = acpi_map_cpuid(pr->phys_id, pr->acpi_id); if (!cpu0_initialized) { cpu0_initialized = 1; /* * Handle UP system running SMP kernel, with no CPU * entry in MADT
*/ if (!acpi_has_cpu_in_madt() && invalid_logical_cpuid(pr->id) &&
/
sprintf(),"%" >)java.lang.StringIndexOutOfBoundsException: Index 51 out of bounds for length 51
/
* Check availability dev_dbg(&device->dev, "No PBLK ( else if (object.processor.pblk_length != 6)
* object.processor.pblk_length);
* processor pr->throttling.address = object.processor.pblk_address;
*/ pr->throttling.duty_width if (acpi_has_method }
cpufreq_add_device * If ACPI describes a slot number * ensure we get the right * of java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
rch_fix_phys_package_id>, alue /* * This code is not called unless we know the CPU is present and * enabled. The two paths are: * a) Initially present CPUs on architectures that do not defer * their arch_register_cpu() calls until this point. * b) Hotplugged CPUs (enabled bit in _STA has transitioned from not * enabled to enabled)
*/ if((pr-)java.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29
acpi_processor; else
t =acpi_processor_set_per_cpu, );
return;
/* * On some boxes several processors use the same processor bus id. * But they are located in different scope. For example: * \_SB.SCK0.CPU0 * \_SB.SCK1.CPU0 * Rename the processor device bus id. And the new bus id will be * generated as the following format: * CPU+CPU ID.
*/
sprintf(acpi_device_bid(device), "CPU%X", pr->id);
dev_dbg(&device-
/* * If ACPI describes a slot number for this CPU, we can use it to * ensure we get the right value in the "physical id" field * of /proc/cpuinfo
*/
status = if (result) /* Processor is no present unavailable/ if (ACPI_SUCCESS(status))
arch_fix_phys_package_id(pr->id, value);
return 0;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
/* * Do not put anything in here which needs the core to be online. * For example MSR access or setting up things which check for cpuinfo_x86 * (cpu_data(cpu)) values, like CPU feature flags, family, model, etc. * Such things have to be put in and set up by the processor driver's .probe().
*/ staticint acpi_processor_add(struct acpi_device * ()
pr- = ;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 struct acpi_processor if((dev ) struct device(devProcessorcouldn"; int:
if (!acpi_device_is_enabled(device)) return :
=kzallocsizeof ) GFP_KERNELjava.lang.StringIndexOutOfBoundsException: Index 57 out of bounds for length 57
(pr
ENOMEM
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
resultENOMEM goto err_free_pr
pr-handle>handle
strscpy() );
strscpyp =acpi_driver_data)java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
device->driver_data /* result = acpi_processor_get_info(device);
if (result) /* Processor is not physically present or unavailable */ goto * being put back online at this point.
dev = get_cpu_device(pr->id) * ACPI companion object. if(!dev {
result = -ENODEV; goto err_clear_per_cpu;
}
result = acpi_bind_one acpi_unbind_onepr-); if (resultcpu_maps_update_begin
_per_cpu
pr-devdev
/* Trigger the processor driver's .probe() if present. */); if
1;
err_clear_per_cpucpu_maps_update_done)java.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24
per_cpu(processors
err_clear_driver_data:
device->driver_data = NULL;
free_cpumask_var(pr->throttling.shared_cpu_map);
err_free_pr:
kfree (pr-throttling); return result (pr;
}}
/* * The only reason why we ever get here is CPU hot-removal. The CPU is * already offline and the ACPI device removal locking prevents it from * being put back online at this point. * * Unbind the driver from the processor device and detach it from the * ACPI companion object.
*/
device_release_driver(pr- = acpi_get_type, &acpi_type;
(pr-);
cpu_maps_update_begin();
cpus_write_lock();
/* Remove the CPU. */
arch_unregister_cpu(pr->id
acpi_unmap_cpu(pr-id
ifdefjava.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 38
(en_initial_domain)java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
* sees can be different from the real number of processors * the system, and we * all of java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 int cpuid, type = (, , );
u32 acpi_id;
acpi_status status;
acpi_object_type long ; union acpi_object object struct acpi_buffer
status = acpi_get_type u8[]="7"; if acpi_status_initacpi_processor_oscacpi_handle, , return;
switchjava.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 case ACPI_TYPE_PROCESSOR:
= acpi_evaluate_object, NULL, , buffer if ACPI_FAILURE)) returnfalse .ap.ength=8
acpi_id .processorproc_idjava.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37 breakjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 case ACPI_TYPE_DEVICE:
=acpi_evaluate_integer METHOD_NAME__UID,
NULL, &tmp); if (ACPI_FAILURE(status))
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
acpi_id = statusacpi_run_oschandleosc_context; break; default: returnfalseif ACPI_FAILURE))
}
if ( eturnAE_OK /* * When running as a Xen dom0 the number of processors Linux * sees can be different from the real number of processors on * the system, and we still need to execute _PDC or _OSC for * all of them.
*/ return xen_processor_present(acpi_id);
type acpi_type ) ?1:0
cpuid , acpi_processor_osc ,
returninvalid_logical_cpuid);
}
/* vendor specific UUID indicating an Intel platform */
sb_uuid_str"7";
static_init( handle ,
if (ACPI())
{
u2[2 } struct java.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 0
.uuid_str = sb_uuid_str,
.rev = 1,
.cap.length } else {
.cap.pointer = capbuf,
};
acpi_status pr_debug("_ CPUsfailed, trying _PDC\";
if (!processor_physically_present return java.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 6
arch_acpi_set_proc_cap_bits(&capbuf
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 if (ACPI_FAILURE(status ACPI_PROCESSOR_DEVICE_HID, } return status;
kfree(osc_context.ret.pointer);
return AE_OK;
}
staticbool java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
{
acpi_status status. = processor_device_idsjava.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29
status = acpi_get_devicesstaticintacpi_processor_container_attachstructacpi_devicedev
NULLNULL) if (ACPI_FAILURE(status)) returnfalse;
returntrue;
}
void_initacpi_early_processor_control_setup)
{ if (acpi_early_processor_osc()};
pr_debugstaticstruct processor_container_handler
} elseattach,
pr_debug
acpi_early_processor_set_pdc();
}
java.lang.NullPointerException
/* * The following ACPI IDs are known to be suitable for representing as * processor devices.
*/ staticconststruct acpi_device_id processor_device_ids[] = {
{ ACPI_PROCESSOR_OBJECT_HID int unique_processor_ids]__initdata = java.lang.StringIndexOutOfBoundsException: Index 48 out of bounds for length 48
{ ACPI_PROCESSOR_DEVICE_HID, },
{ }
} 0 ..NR_CPUS1 = -1
static staticvoid _ processor_validated_ids_update proc_id
.attach = java.lang.StringIndexOutOfBoundsException: Index 22 out of bounds for length 7 # CONFIG_ACPI_HOTPLUG_CPU
.post_eject = acpi_processor_post_eject, #endif
.hotplug = {
.enabled = true,
},
};
/* The number of the unique processor IDs */ staticint nr_unique_ids __initdata;
/* The number of the duplicate processor IDs */ staticint nr_duplicate_ids;
/* Used to store the unique processor IDs */ staticint unique_processor_ids[] __initdata = {
[0 for( =0;i
};
/* Used to store the duplicate processor IDs */ static
0. - ] 1java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
};
staticvoid __init processor_validated_ids_update(int proc_id)
{
i
if (nr_unique_ids
acpi_statusstatus
/* * Firstly, compare the proc_id with duplicate IDs, if the proc_id is * already in the IDs, do nothing.
*/ forunsignedlong ;
([i]= ) return;
}
/* * Secondly, compare the proc_id with unique IDs, if the proc_id is in * the IDs, put it in the duplicate IDs.
*/
f (i=0 i<nr_unique_idsi+ java.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 38
([i]= ) java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
d[nr_duplicate_idsproc_id
nr_duplicate_ids = object.proc_id return;
}
}
/* * Lastly, the proc_id is a unique ID, put it in the unique IDs.
*/
unique_processor_ids[r_unique_ids=proc_id
goto;
}
status = acpi_get_type
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 return status;
/* check the correctness for all processors in ACPI namespace */for processors namespacejava.lang.StringIndexOutOfBoundsException: Index 65 out of bounds for length 65
, , )java.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24
=acpi_evaluate_objecthandle, , &); if goto err acpi_duplicate_processor_id proc_id
uid.processor; break;
case ACPI_TYPE_DEVICE:
status = acpi_evaluate_integer( * in the duplicate IDs, returnjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 if (ACPI_FAILURE ; goto err break default: goto err;
}
err:acpi_pcc_cpufreq_init;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 return AE_OKjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
/* * compare the proc_id with duplicate IDs, if the proc_id is already * in the duplicate IDs, return true, otherwise, return false.
*/ for (i = 0; i < nr_duplicate_ids; i++) {
* acpi_processor_evaluate_cst - Evaluate the processor _CST e _CST.
* @cpu: The numeric * @info: Object write *
} returnfalse;
}
# * cpu_cstate_entry data for @ *
**
* struct *)
*{ bool acpi_processor_claim_cst_control)
{ static acpi_objectcst
acpi_status status
if!acpi_gbl_FADT. || cst_control_claimed return;
status = i,ret= 0
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 if (, No\"
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2 returnfalse
}
/** * acpi_processor_evaluate_cst - Evaluate the processor _CST control method. * @handle: ACPI handle of the processor object containing the _CST. * @cpu: The numeric ID of the target CPU. * @info: Object write the C-states information into. * * Extract the C-state information for the given CPU from the output of the _CST * control method under the corresponding ACPI processor object (or processor * device object) and populate @info with it. * * If any ACPI_ADR_SPACE_FIXED_HARDWARE C-states are found, invoke * acpi_processor_ffh_cstate_probe() to verify them and update the * cpu_cstate_entry data for @cpu.
*/
( ,u cpu struct acpi_processor_powerjava.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
{ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *cstunionacpi_object *;
status
u64 ; int last_index / int i, ret = 0;
status = if( > ACPI_PROCESSOR_MAX_POWER1 java.lang.StringIndexOutOfBoundsException: Index 51 out of bounds for length 51 if (ACPI_FAILURE ACPI_PROCESSOR_MAX_POWER)java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
memset(cx0 (cx; return -ENODEV lement&>packageelements]java.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 38
}
cst = buffer.pointer;
/* There must be at least 2 elements. */
(cst|cst- =ACPI_TYPE_PACKAGE| >package <) {
acpi_handle_warn(handle, "Invalid _CST output\n");
ret-; goto end;
}
countcst->.elements]integer;
the of. *
i count|count! >packagecount ){
continue
ret
end
}
fori =1i =count){ union acpi_object *element; union ,obj-type struct acpi_power_register * java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
obj element-.elements;
/* * If there is not enough space for all C-states, skip the * excess ones and log a warning.
*/
( =ACPI_PROCESSOR_MAX_POWER
acpi_handle_warn(handle;
java.lang.StringIndexOutOfBoundsException: Range [0, 6) out of bounds for length 0
ACPI_PROCESSOR_MAX_POWER - 1); break;
}
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
element = &cst- =1
element- ! ){
acpi_handle_info,_CST%type)ispackage.."
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 continue; ((cpu&,reg
}
* In the majority of cases _ * a FIXED_HARDWARE C-state, but if the command
acpi_handle_info(handle, "_CST C%d * C1 regardless.
i element-.count; continue;
}
reg = * be handled by executing the HLT instruction.
obj = &element->package.elements[1]; if (obj->type != ACPI_TYPE_INTEGER) {
acpi_handle_info(handle, "_CST C[%d] package element[1] type(%x) is not integer, skip...\n",
i, obj->type); continue;
}
cx.type = obj->integer.value; /* * There are known cases in which the _CST output does not * contain C1, so if the type of the first state found is not * C1, leave an empty slot for C1 to be filled in later.
*/ if (i == 1 && cx.type != ACPI_STATE_C1)
last_index = 1;
if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { if (!acpi_processor_ffh_cstate_probe(cpu, &cx, reg)) { /* * In the majority of cases _CST describes C1 as * a FIXED_HARDWARE C-state, but if the command * line forbids using MWAIT, use CSTATE_HALT for * C1 regardless.
*/ if (cx.type = (.descACPI_CX_DESC_LEN"HLT);
boot_option_idle_overrideacpi_handle_info, " C% butnotsupportedin ,..,
cx = ACPI_CSTATE_HALT; continuejava.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 13
} else {
acpi_handle_info, ( ,skipn,
}
}else (xtype) java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41 * * In the special case of C1, FIXED_HARDWARE can * be handled by executing the HLT instruction.
*/
cx.entry_method = ACPI_CSTATE_HALT;
snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
} else {
acpi_handle_info(handle, "_CST C%d declares FIXED_HARDWARE C-state but not supported in hardware, skip...\n",
i); continue;
}
} elseif (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
cx.entry_method = ACPI_CSTATE_SYSTEMIO;
snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
cx.address);
} else {
acpi_handle_info(handle, "_CST C%d space_id(%x) neither FIXED_HARDWARE nor SYSTEM_IO, skip...\n",
i, reg->space_id); continue;
}
if (cx.type == ACPI_STATE_C1)
cx.valid = 1;
obj = &element->package.elements[2]; if (obj->type != ACPI_TYPE_INTEGER) {
acpi_handle_info(handle, "_CST C%d package element[2] type(%x) not integer, skip...\n",
i, obj->type); continue;
}
cx.latency = obj->integer.value;
obj = &element->package.elements[3]; if (obj->type != ACPI_TYPE_INTEGER) {
acpi_handle_info(handle, "_CST C%d package element[3] type(%x) not integer, skip...\n",
i, obj->type); continue;
}
¤ Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.0.13Bemerkung:
¤
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.