Quelle nsPersistentProperties.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "nsArrayEnumerator.h"
#include "nsID.h"
#include "nsCOMArray.h"
#include "nsUnicharInputStream.h"
#include "nsPrintfCString.h"

#include "nsPersistentProperties.h"
#include "nsIProperties.h"

#include "mozilla/ArenaAllocatorExtensions.h"

using mozilla::ArenaStrdup;

struct PropertyTableEntry : public PLDHashEntryHdr {
  // both of these are arena-allocated
  const char* mKey;
  const char16_t* mValue;
};

static const struct PLDHashTableOps property_HashTableOps = {
    PLDHashTable::HashStringKey,
    PLDHashTable::MatchStringKey,
    PLDHashTable::MoveEntryStub,
    PLDHashTable::ClearEntryStub,
    nullptr,
};

//
// parser stuff
//
enum EParserState {
  eParserState_AwaitingKey,
  eParserState_Key,
  eParserState_AwaitingValue,
  eParserState_Value,
  eParserState_Comment
};

enum EParserSpecial {
  eParserSpecial_None,     // not parsing a special character
  eParserSpecial_Escaped,  // awaiting a special character
  eParserSpecial_Unicode   // parsing a \Uxxx value
};

class MOZ_STACK_CLASS nsPropertiesParser {
public:
  explicit nsPropertiesParser(nsIPersistentProperties* aProps)
      : mUnicodeValuesRead(0),
        mUnicodeValue(u'\0'),
        mHaveMultiLine(false),
        mMultiLineCanSkipN(false),
        mState(eParserState_AwaitingKey),
        mSpecialState(eParserSpecial_None),
        mProps(aProps) {}

  void FinishValueState(nsAString& aOldValue) {
    static const char trimThese[] = " \t";
    mKey.Trim(trimThese, false, true);
    mProps->SetStringProperty(NS_ConvertUTF16toUTF8(mKey), mValue, aOldValue);
    mSpecialState = eParserSpecial_None;
    WaitForKey();
  }

  EParserState GetState() { return mState; }

  static nsresult SegmentWriter(nsIUnicharInputStream* aStream, void* aClosure,
                                const char16_t* aFromSegment,
                                uint32_t aToOffset, uint32_t aCount,
                                uint32_t* aWriteCount);

  nsresult ParseBuffer(const char16_t* aBuffer, uint32_t aBufferLength);

private:
  bool ParseValueCharacter(
      char16_t aChar,                // character that is just being parsed
      const char16_t* aCur,          // pointer to character aChar in the buffer
      const char16_t*& aTokenStart,  // string copying is done in blocks as big
                                     // as possible, aTokenStart points to the
                                     // beginning of this block
      nsAString& aOldValue);  // when duplicate property is found, new value
                              // is stored into hashtable and the old one is
                              // placed in this variable

  void WaitForKey() { mState = eParserState_AwaitingKey; }

  void EnterKeyState() {
    mKey.Truncate();
    mState = eParserState_Key;
  }

  void WaitForValue() { mState = eParserState_AwaitingValue; }

  void EnterValueState() {
    mValue.Truncate();
    mState = eParserState_Value;
    mSpecialState = eParserSpecial_None;
  }

  void EnterCommentState() { mState = eParserState_Comment; }

  nsAutoString mKey;
  nsAutoString mValue;

  uint32_t mUnicodeValuesRead;  // should be 4!
  char16_t mUnicodeValue;       // currently parsed unicode value
  bool mHaveMultiLine;          // is TRUE when last processed characters form
                                // any of following sequences:
                                //  - "\\\r"
                                //  - "\\\n"
                                //  - "\\\r\n"
                                //  - any sequence above followed by any
                                //    combination of ' ' and '\t'
  bool mMultiLineCanSkipN;      // TRUE if "\\\r" was detected
  EParserState mState;
  // if we see a '\' then we enter this special state
  EParserSpecial mSpecialState;
  nsCOMPtr<nsIPersistentProperties> mProps;
};

inline bool IsWhiteSpace(char16_t aChar) {
  return (aChar == ' ') || (aChar == '\t') || (aChar == '\r') ||
         (aChar == '\n');
}

inline bool IsEOL(char16_t aChar) { return (aChar == '\r') || (aChar == '\n'); }

bool nsPropertiesParser::ParseValueCharacter(char16_t aChar,
                                             const char16_t* aCur,
                                             const char16_t*& aTokenStart,
                                             nsAString& aOldValue) {
  switch (mSpecialState) {
    // the normal state - look for special characters
    case eParserSpecial_None:
      switch (aChar) {
        case '\\':
          if (mHaveMultiLine) {
            // there is nothing to append to mValue yet
            mHaveMultiLine = false;
          } else {
            mValue += Substring(aTokenStart, aCur);
          }

          mSpecialState = eParserSpecial_Escaped;
          break;

        case '\n':
          // if we detected multiline and got only "\\\r" ignore next "\n" if
          // any
          if (mHaveMultiLine && mMultiLineCanSkipN) {
            // but don't allow another '\n' to be skipped
            mMultiLineCanSkipN = false;
            // Now there is nothing to append to the mValue since we are
            // skipping whitespaces at the beginning of the new line of the
            // multiline property. Set aTokenStart properly to ensure that
            // nothing is appended if we find regular line-end or the end of the
            // buffer.
            aTokenStart = aCur + 1;
            break;
          }
          [[fallthrough]];

        case '\r':
          // we're done! We have a key and value
          mValue += Substring(aTokenStart, aCur);
          FinishValueState(aOldValue);
          mHaveMultiLine = false;
          break;

        default:
          // there is nothing to do with normal characters,
          // but handle multilines correctly
          if (mHaveMultiLine) {
            if (aChar == ' ' || aChar == '\t') {
              // don't allow another '\n' to be skipped
              mMultiLineCanSkipN = false;
              // Now there is nothing to append to the mValue since we are
              // skipping whitespaces at the beginning of the new line of the
              // multiline property. Set aTokenStart properly to ensure that
              // nothing is appended if we find regular line-end or the end of
              // the buffer.
              aTokenStart = aCur + 1;
              break;
            }
            mHaveMultiLine = false;
            aTokenStart = aCur;
          }
          break;  // from switch on (aChar)
      }
      break;  // from switch on (mSpecialState)

    // saw a \ character, so parse the character after that
    case eParserSpecial_Escaped:
      // probably want to start parsing at the next token
      // other characters, like 'u' might override this
      aTokenStart = aCur + 1;
      mSpecialState = eParserSpecial_None;

      switch (aChar) {
        // the easy characters - \t, \n, and so forth
        case 't':
          mValue += char16_t('\t');
          break;
        case 'n':
          mValue += char16_t('\n');
          break;
        case 'r':
          mValue += char16_t('\r');
          break;
        case '\\':
          mValue += char16_t('\\');
          break;

        // switch to unicode mode!
        case 'u':
        case 'U':
          mSpecialState = eParserSpecial_Unicode;
          mUnicodeValuesRead = 0;
          mUnicodeValue = 0;
          break;

        // a \ immediately followed by a newline means we're going multiline
        case '\r':
        case '\n':
          mHaveMultiLine = true;
          mMultiLineCanSkipN = (aChar == '\r');
          mSpecialState = eParserSpecial_None;
          break;

        default:
          // don't recognize the character, so just append it
          mValue += aChar;
          break;
      }
      break;

    // we're in the middle of parsing a 4-character unicode value
    // like \u5f39
    case eParserSpecial_Unicode:
      if ('0' <= aChar && aChar <= '9') {
        mUnicodeValue = (mUnicodeValue << 4) | (aChar - '0');
      } else if ('a' <= aChar && aChar <= 'f') {
        mUnicodeValue = (mUnicodeValue << 4) | (aChar - 'a' + 0x0a);
      } else if ('A' <= aChar && aChar <= 'F') {
        mUnicodeValue = (mUnicodeValue << 4) | (aChar - 'A' + 0x0a);
      } else {
        // non-hex character. Append what we have, and move on.
        mValue += mUnicodeValue;
        mSpecialState = eParserSpecial_None;

        // leave aTokenStart at this unknown character, so it gets appended
        aTokenStart = aCur;

        // ensure parsing this non-hex character again
        return false;
      }

      if (++mUnicodeValuesRead >= 4) {
        aTokenStart = aCur + 1;
        mSpecialState = eParserSpecial_None;
        mValue += mUnicodeValue;
      }

      break;
  }

  return true;
}

nsresult nsPropertiesParser::SegmentWriter(nsIUnicharInputStream* aStream,
                                           void* aClosure,
                                           const char16_t* aFromSegment,
                                           uint32_t aToOffset, uint32_t aCount,
                                           uint32_t* aWriteCount) {
  nsPropertiesParser* parser = static_cast<nsPropertiesParser*>(aClosure);
  parser->ParseBuffer(aFromSegment, aCount);

  *aWriteCount = aCount;
  return NS_OK;
}

nsresult nsPropertiesParser::ParseBuffer(const char16_t* aBuffer,
                                         uint32_t aBufferLength) {
  const char16_t* cur = aBuffer;
  const char16_t* end = aBuffer + aBufferLength;

  // points to the start/end of the current key or value
  const char16_t* tokenStart = nullptr;

  // if we're in the middle of parsing a key or value, make sure
  // the current token points to the beginning of the current buffer
  if (mState == eParserState_Key || mState == eParserState_Value) {
    tokenStart = aBuffer;
  }

  nsAutoString oldValue;

  while (cur != end) {
    char16_t c = *cur;

    switch (mState) {
      case eParserState_AwaitingKey:
        if (c == '#' || c == '!') {
          EnterCommentState();
        }

        else if (!IsWhiteSpace(c)) {
          // not a comment, not whitespace, we must have found a key!
          EnterKeyState();
          tokenStart = cur;
        }
        break;

      case eParserState_Key:
        if (c == '=' || c == ':') {
          mKey += Substring(tokenStart, cur);
          WaitForValue();
        }
        break;

      case eParserState_AwaitingValue:
        if (IsEOL(c)) {
          // no value at all! mimic the normal value-ending
          EnterValueState();
          FinishValueState(oldValue);
        }

        // ignore white space leading up to the value
        else if (!IsWhiteSpace(c)) {
          tokenStart = cur;
          EnterValueState();

          // make sure to handle this first character
          if (ParseValueCharacter(c, cur, tokenStart, oldValue)) {
            cur++;
          }
          // If the character isn't consumed, don't do cur++ and parse
          // the character again. This can happen f.e. for char 'X' in sequence
          // "\u00X". This character can be control character and must be
          // processed again.
          continue;
        }
        break;

      case eParserState_Value:
        if (ParseValueCharacter(c, cur, tokenStart, oldValue)) {
          cur++;
        }
        // See few lines above for reason of doing this
        continue;

      case eParserState_Comment:
        // stay in this state till we hit EOL
        if (c == '\r' || c == '\n') {
          WaitForKey();
        }
        break;
    }

    // finally, advance to the next character
    cur++;
  }

  // if we're still parsing the value and are in eParserSpecial_None, then
  // append whatever we have..
  if (mState == eParserState_Value && tokenStart &&
      mSpecialState == eParserSpecial_None) {
    mValue += Substring(tokenStart, cur);
  }
  // if we're still parsing the key, then append whatever we have..
  else if (mState == eParserState_Key && tokenStart) {
    mKey += Substring(tokenStart, cur);
  }

  return NS_OK;
}

nsPersistentProperties::nsPersistentProperties()
    : mIn(nullptr),
      mTable(&property_HashTableOps, sizeof(PropertyTableEntry), 16) {}

nsPersistentProperties::~nsPersistentProperties() = default;

size_t nsPersistentProperties::SizeOfIncludingThis(
    mozilla::MallocSizeOf aMallocSizeOf) {
  // The memory used by mTable is accounted for in mArena.
  size_t n = 0;
  n += mArena.SizeOfExcludingThis(aMallocSizeOf);
  n += mTable.ShallowSizeOfExcludingThis(aMallocSizeOf);
  return aMallocSizeOf(this) + n;
}

NS_IMPL_ISUPPORTS(nsPersistentProperties, nsIPersistentProperties,
                  nsIProperties)

NS_IMETHODIMP
nsPersistentProperties::Load(nsIInputStream* aIn) {
  nsresult rv = NS_NewUnicharInputStream(aIn, getter_AddRefs(mIn));

  if (rv != NS_OK) {
    NS_WARNING("Error creating UnicharInputStream");
    return NS_ERROR_FAILURE;
  }

  nsPropertiesParser parser(this);

  uint32_t nProcessed;
  // If this 4096 is changed to some other value, make sure to adjust
  // the bug121341.properties test file accordingly.
  while (NS_SUCCEEDED(rv = mIn->ReadSegments(nsPropertiesParser::SegmentWriter,
                                             &parser, 4096, &nProcessed)) &&
         nProcessed != 0);
  mIn = nullptr;
  if (NS_FAILED(rv)) {
    return rv;
  }

  // We may have an unprocessed value at this point
  // if the last line did not have a proper line ending.
  if (parser.GetState() == eParserState_Value) {
    nsAutoString oldValue;
    parser.FinishValueState(oldValue);
  }

  return NS_OK;
}

NS_IMETHODIMP
nsPersistentProperties::SetStringProperty(const nsACString& aKey,
                                          const nsAString& aNewValue,
                                          nsAString& aOldValue) {
  const nsCString& flatKey = PromiseFlatCString(aKey);
  auto entry = static_cast<PropertyTableEntry*>(mTable.Add(flatKey.get()));

  if (entry->mKey) {
    aOldValue = entry->mValue;
    NS_WARNING(
        nsPrintfCString("the property %s already exists", flatKey.get()).get());
  } else {
    aOldValue.Truncate();
  }

  entry->mKey = ArenaStrdup(flatKey, mArena);
  entry->mValue = ArenaStrdup(aNewValue, mArena);

  return NS_OK;
}

NS_IMETHODIMP
nsPersistentProperties::Save(nsIOutputStream* aOut, const nsACString& aHeader) {
  return NS_ERROR_NOT_IMPLEMENTED;
}

NS_IMETHODIMP
nsPersistentProperties::GetStringProperty(const nsACString& aKey,
                                          nsAString& aValue) {
  const nsCString& flatKey = PromiseFlatCString(aKey);

  auto entry = static_cast<PropertyTableEntry*>(mTable.Search(flatKey.get()));
  if (!entry) {
    return NS_ERROR_FAILURE;
  }

  aValue = entry->mValue;
  return NS_OK;
}

NS_IMETHODIMP
nsPersistentProperties::Enumerate(nsISimpleEnumerator** aResult) {
  nsCOMArray<nsIPropertyElement> props;

  // We know the necessary size; we can avoid growing it while adding elements
  props.SetCapacity(mTable.EntryCount());

  // Step through hash entries populating a transient array
  for (auto iter = mTable.Iter(); !iter.Done(); iter.Next()) {
    auto entry = static_cast<PropertyTableEntry*>(iter.Get());

    RefPtr<nsPropertyElement> element = new nsPropertyElement(
        nsDependentCString(entry->mKey), nsDependentString(entry->mValue));

    if (!props.AppendObject(element)) {
      return NS_ERROR_OUT_OF_MEMORY;
    }
  }

  return NS_NewArrayEnumerator(aResult, props, NS_GET_IID(nsIPropertyElement));
}

////////////////////////////////////////////////////////////////////////////////
// XXX Some day we'll unify the nsIPersistentProperties interface with
// nsIProperties, but until now...

NS_IMETHODIMP
nsPersistentProperties::Get(const char* aProp, const nsIID& aUUID,
                            void** aResult) {
  return NS_ERROR_NOT_IMPLEMENTED;
}

NS_IMETHODIMP
nsPersistentProperties::Set(const char* aProp, nsISupports* value) {
  return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsPersistentProperties::Undefine(const char* aProp) {
  return NS_ERROR_NOT_IMPLEMENTED;
}

NS_IMETHODIMP
nsPersistentProperties::Has(const char* aProp, bool* aResult) {
  *aResult = !!mTable.Search(aProp);
  return NS_OK;
}

NS_IMETHODIMP
nsPersistentProperties::GetKeys(nsTArray<nsCString>& aKeys) {
  return NS_ERROR_NOT_IMPLEMENTED;
}

////////////////////////////////////////////////////////////////////////////////
// PropertyElement
////////////////////////////////////////////////////////////////////////////////

nsresult nsPropertyElement::Create(REFNSIID aIID, void** aResult) {
  RefPtr<nsPropertyElement> propElem = new nsPropertyElement();
  return propElem->QueryInterface(aIID, aResult);
}

NS_IMPL_ISUPPORTS(nsPropertyElement, nsIPropertyElement)

NS_IMETHODIMP
nsPropertyElement::GetKey(nsACString& aReturnKey) {
  aReturnKey = mKey;
  return NS_OK;
}

NS_IMETHODIMP
nsPropertyElement::GetValue(nsAString& aReturnValue) {
  aReturnValue = mValue;
  return NS_OK;
}

NS_IMETHODIMP
nsPropertyElement::SetKey(const nsACString& aKey) {
  mKey = aKey;
  return NS_OK;
}

NS_IMETHODIMP
nsPropertyElement::SetValue(const nsAString& aValue) {
  mValue = aValue;
  return NS_OK;
}

////////////////////////////////////////////////////////////////////////////////

quality98%

¤ Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.0.19Bemerkung: (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.