Quelle SnappyCompressOutputStream.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "mozilla/SnappyCompressOutputStream.h"

#include <algorithm>
#include "nsStreamUtils.h"
#include "snappy/snappy.h"

namespace mozilla {

NS_IMPL_ISUPPORTS(SnappyCompressOutputStream, nsIOutputStream);

// static
const size_t SnappyCompressOutputStream::kMaxBlockSize = snappy::kBlockSize;

SnappyCompressOutputStream::SnappyCompressOutputStream(
    nsIOutputStream* aBaseStream, size_t aBlockSize)
    : mBaseStream(aBaseStream),
      mBlockSize(std::min(aBlockSize, kMaxBlockSize)),
      mNextByte(0),
      mCompressedBufferLength(0),
      mStreamIdentifierWritten(false) {
  MOZ_ASSERT(mBlockSize > 0);

  // This implementation only supports sync base streams.  Verify this in debug
  // builds.  Note, this can be simpler than the check in
  // SnappyUncompressInputStream because we don't have to deal with the
  // nsStringInputStream oddness of being non-blocking and sync.
#ifdef DEBUG
  bool baseNonBlocking;
  nsresult rv = mBaseStream->IsNonBlocking(&baseNonBlocking);
  MOZ_ASSERT(NS_SUCCEEDED(rv));
  MOZ_ASSERT(!baseNonBlocking);
#endif
}

size_t SnappyCompressOutputStream::BlockSize() const { return mBlockSize; }

NS_IMETHODIMP
SnappyCompressOutputStream::Close() {
  if (!mBaseStream) {
    return NS_OK;
  }

  nsresult rv = Flush();
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }

  mBaseStream->Close();
  mBaseStream = nullptr;

  mBuffer = nullptr;
  mCompressedBuffer = nullptr;

  return NS_OK;
}

NS_IMETHODIMP
SnappyCompressOutputStream::Flush() {
  if (!mBaseStream) {
    return NS_BASE_STREAM_CLOSED;
  }

  nsresult rv = FlushToBaseStream();
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }

  mBaseStream->Flush();

  return NS_OK;
}

NS_IMETHODIMP
SnappyCompressOutputStream::StreamStatus() {
  if (!mBaseStream) {
    return NS_BASE_STREAM_CLOSED;
  }
  return mBaseStream->StreamStatus();
}

NS_IMETHODIMP
SnappyCompressOutputStream::Write(const char* aBuf, uint32_t aCount,
                                  uint32_t* aResultOut) {
  return WriteSegments(NS_CopyBufferToSegment, const_cast<char*>(aBuf), aCount,
                       aResultOut);
}

NS_IMETHODIMP
SnappyCompressOutputStream::WriteFrom(nsIInputStream*, uint32_t, uint32_t*) {
  return NS_ERROR_NOT_IMPLEMENTED;
}

NS_IMETHODIMP
SnappyCompressOutputStream::WriteSegments(nsReadSegmentFun aReader,
                                          void* aClosure, uint32_t aCount,
                                          uint32_t* aBytesWrittenOut) {
  *aBytesWrittenOut = 0;

  if (!mBaseStream) {
    return NS_BASE_STREAM_CLOSED;
  }

  if (!mBuffer) {
    mBuffer.reset(new (fallible) char[mBlockSize]);
    if (NS_WARN_IF(!mBuffer)) {
      return NS_ERROR_OUT_OF_MEMORY;
    }
  }

  while (aCount > 0) {
    // Determine how much space is left in our flat, uncompressed buffer.
    MOZ_ASSERT(mNextByte <= mBlockSize);
    uint32_t remaining = mBlockSize - mNextByte;

    // If it is full, then compress and flush the data to the base stream.
    if (remaining == 0) {
      nsresult rv = FlushToBaseStream();
      if (NS_WARN_IF(NS_FAILED(rv))) {
        return rv;
      }

      // Now the entire buffer should be available for copying.
      MOZ_ASSERT(!mNextByte);
      remaining = mBlockSize;
    }

    uint32_t numToRead = std::min(remaining, aCount);
    uint32_t numRead = 0;

    nsresult rv = aReader(this, aClosure, &mBuffer[mNextByte],
                          *aBytesWrittenOut, numToRead, &numRead);

    // As defined in nsIOutputStream.idl, do not pass reader func errors.
    if (NS_FAILED(rv)) {
      return NS_OK;
    }

    // End-of-file
    if (numRead == 0) {
      return NS_OK;
    }

    mNextByte += numRead;
    *aBytesWrittenOut += numRead;
    aCount -= numRead;
  }

  return NS_OK;
}

NS_IMETHODIMP
SnappyCompressOutputStream::IsNonBlocking(bool* aNonBlockingOut) {
  *aNonBlockingOut = false;
  return NS_OK;
}

SnappyCompressOutputStream::~SnappyCompressOutputStream() { Close(); }

nsresult SnappyCompressOutputStream::FlushToBaseStream() {
  MOZ_ASSERT(mBaseStream);

  // Lazily create the compressed buffer on our first flush.  This
  // allows us to report OOM during stream operation.  This buffer
  // will then get re-used until the stream is closed.
  if (!mCompressedBuffer) {
    mCompressedBufferLength = MaxCompressedBufferLength(mBlockSize);
    mCompressedBuffer.reset(new (fallible) char[mCompressedBufferLength]);
    if (NS_WARN_IF(!mCompressedBuffer)) {
      return NS_ERROR_OUT_OF_MEMORY;
    }
  }

  // The first chunk must be a StreamIdentifier chunk.  Write it out
  // if we have not done so already.
  nsresult rv = MaybeFlushStreamIdentifier();
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }

  // Compress the data to our internal compressed buffer.
  size_t compressedLength;
  rv = WriteCompressedData(mCompressedBuffer.get(), mCompressedBufferLength,
                           mBuffer.get(), mNextByte, &compressedLength);
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }
  MOZ_ASSERT(compressedLength > 0);

  mNextByte = 0;

  // Write the compressed buffer out to the base stream.
  uint32_t numWritten = 0;
  rv = WriteAll(mCompressedBuffer.get(), compressedLength, &numWritten);
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }
  MOZ_ASSERT(compressedLength == numWritten);

  return NS_OK;
}

nsresult SnappyCompressOutputStream::MaybeFlushStreamIdentifier() {
  MOZ_ASSERT(mCompressedBuffer);

  if (mStreamIdentifierWritten) {
    return NS_OK;
  }

  // Build the StreamIdentifier in our compressed buffer.
  size_t compressedLength;
  nsresult rv = WriteStreamIdentifier(
      mCompressedBuffer.get(), mCompressedBufferLength, &compressedLength);
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }

  // Write the compressed buffer out to the base stream.
  uint32_t numWritten = 0;
  rv = WriteAll(mCompressedBuffer.get(), compressedLength, &numWritten);
  if (NS_WARN_IF(NS_FAILED(rv))) {
    return rv;
  }
  MOZ_ASSERT(compressedLength == numWritten);

  mStreamIdentifierWritten = true;

  return NS_OK;
}

nsresult SnappyCompressOutputStream::WriteAll(const char* aBuf, uint32_t aCount,
                                              uint32_t* aBytesWrittenOut) {
  *aBytesWrittenOut = 0;

  if (!mBaseStream) {
    return NS_BASE_STREAM_CLOSED;
  }

  uint32_t offset = 0;
  while (aCount > 0) {
    uint32_t numWritten = 0;
    nsresult rv = mBaseStream->Write(aBuf + offset, aCount, &numWritten);
    if (NS_WARN_IF(NS_FAILED(rv))) {
      return rv;
    }
    offset += numWritten;
    aCount -= numWritten;
    *aBytesWrittenOut += numWritten;
  }

  return NS_OK;
}

}  // namespace mozilla

quality95%

¤ Dauer der Verarbeitung: 0.15 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.