Quelle res_Trendline.cxx Sprache: C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
*   Licensed to the Apache Software Foundation (ASF) under one or more
*   contributor license agreements. See the NOTICE file distributed
*   with this work for additional information regarding copyright
*   ownership. The ASF licenses this file to you under the Apache
*   License, Version 2.0 (the "License"); you may not use this file
*   except in compliance with the License. You may obtain a copy of
*   the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/

#include "res_Trendline.hxx"
#include <bitmaps.hlst>
#include <chartview/ChartSfxItemIds.hxx>

#include <com/sun/star/chart2/MovingAverageType.hpp>

#include <svl/intitem.hxx>
#include <svl/numformat.hxx>
#include <svl/stritem.hxx>
#include <vcl/formatter.hxx>
#include <vcl/weld.hxx>

using namespace css::chart2;

namespace chart
{

static void lcl_setValue(weld::FormattedSpinButton& rFmtField, double fValue )
{
    Formatter& rFieldFormatter = rFmtField.GetFormatter();
    rFieldFormatter.SetValue(fValue);
    rFieldFormatter.SetDefaultValue( fValue );
}

TrendlineResources::TrendlineResources(weld::Builder& rBuilder, const SfxItemSet& rInAttrs)
    : m_eTrendLineType(SvxChartRegress::Linear)
    , m_bTrendLineUnique(true)
    , m_pNumFormatter(nullptr)
    , m_nNbPoints(0)
    , m_xRB_Linear(rBuilder.weld_radio_button(u"linear"_ustr))
    , m_xRB_Logarithmic(rBuilder.weld_radio_button(u"logarithmic"_ustr))
    , m_xRB_Exponential(rBuilder.weld_radio_button(u"exponential"_ustr))
    , m_xRB_Power(rBuilder.weld_radio_button(u"power"_ustr))
    , m_xRB_Polynomial(rBuilder.weld_radio_button(u"polynomial"_ustr))
    , m_xRB_MovingAverage(rBuilder.weld_radio_button(u"movingAverage"_ustr))
    , m_xFI_Linear(rBuilder.weld_image(u"imageLinear"_ustr))
    , m_xFI_Logarithmic(rBuilder.weld_image(u"imageLogarithmic"_ustr))
    , m_xFI_Exponential(rBuilder.weld_image(u"imageExponential"_ustr))
    , m_xFI_Power(rBuilder.weld_image(u"imagePower"_ustr))
    , m_xFI_Polynomial(rBuilder.weld_image(u"imagePolynomial"_ustr))
    , m_xFI_MovingAverage(rBuilder.weld_image(u"imageMovingAverage"_ustr))
    , m_xNF_Degree(rBuilder.weld_spin_button(u"degree"_ustr))
    , m_xNF_Period(rBuilder.weld_spin_button(u"period"_ustr))
    , m_xEE_Name(rBuilder.weld_entry(u"entry_name"_ustr))
    , m_xFmtFld_ExtrapolateForward(rBuilder.weld_formatted_spin_button(u"extrapolateForward"_ustr))
    , m_xFmtFld_ExtrapolateBackward(rBuilder.weld_formatted_spin_button(u"extrapolateBackward"_ustr))
    , m_xCB_SetIntercept(rBuilder.weld_check_button(u"setIntercept"_ustr))
    , m_xFmtFld_InterceptValue(rBuilder.weld_formatted_spin_button(u"interceptValue"_ustr))
    , m_xCB_ShowEquation(rBuilder.weld_check_button(u"showEquation"_ustr))
    , m_xEE_XName(rBuilder.weld_entry(u"entry_Xname"_ustr))
    , m_xEE_YName(rBuilder.weld_entry(u"entry_Yname"_ustr))
    , m_xCB_ShowCorrelationCoeff(rBuilder.weld_check_button(u"showCorrelationCoefficient"_ustr))
    , m_xCB_RegressionMovingType(rBuilder.weld_combo_box(u"combo_moving_type"_ustr))
{
    FillValueSets();

    Formatter& rForwardFormatter = m_xFmtFld_ExtrapolateForward->GetFormatter();
    rForwardFormatter.ClearMinValue();
    rForwardFormatter.ClearMaxValue();
    Formatter& rBackwardFormatter = m_xFmtFld_ExtrapolateBackward->GetFormatter();
    rBackwardFormatter.ClearMinValue();
    rBackwardFormatter.ClearMaxValue();
    Formatter& rInterceptFormatter = m_xFmtFld_InterceptValue->GetFormatter();
    rInterceptFormatter.ClearMinValue();
    rInterceptFormatter.ClearMaxValue();

    Link<weld::Toggleable&,void> aLink = LINK(this, TrendlineResources, SelectTrendLine);
    m_xRB_Linear->connect_toggled( aLink );
    m_xRB_Logarithmic->connect_toggled( aLink );
    m_xRB_Exponential->connect_toggled( aLink );
    m_xRB_Power->connect_toggled( aLink );
    m_xRB_Polynomial->connect_toggled( aLink );
    m_xRB_MovingAverage->connect_toggled( aLink );

    Link<weld::SpinButton&,void> aLink2 = LINK(this, TrendlineResources, ChangeSpinValue);
    m_xNF_Degree->connect_value_changed(aLink2);
    m_xNF_Period->connect_value_changed(aLink2);
    m_xFmtFld_InterceptValue->connect_value_changed(LINK(this, TrendlineResources, ChangeFormattedValue));

    m_xCB_ShowEquation->connect_toggled(LINK(this, TrendlineResources, ShowEquation));

    Reset( rInAttrs );
    UpdateControlStates();
}

TrendlineResources::~TrendlineResources()
{}

IMPL_LINK_NOARG(TrendlineResources, SelectTrendLine, weld::Toggleable&, void)
{
    if (m_xRB_Linear->get_active())
        m_eTrendLineType = SvxChartRegress::Linear;
    else if (m_xRB_Logarithmic->get_active())
        m_eTrendLineType = SvxChartRegress::Log;
    else if (m_xRB_Exponential->get_active())
        m_eTrendLineType = SvxChartRegress::Exp;
    else if (m_xRB_Power->get_active())
        m_eTrendLineType = SvxChartRegress::Power;
    else if (m_xRB_Polynomial->get_active())
        m_eTrendLineType = SvxChartRegress::Polynomial;
    else if (m_xRB_MovingAverage->get_active())
        m_eTrendLineType = SvxChartRegress::MovingAverage;
    m_bTrendLineUnique = true;

    UpdateControlStates();
}

void TrendlineResources::Reset( const SfxItemSet& rInAttrs )
{
    if( const SfxStringItem* pCurveNameItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_CURVE_NAME ) )
    {
        OUString aName = pCurveNameItem->GetValue();
        m_xEE_Name->set_text(aName);
    }
    else
    {
        m_xEE_Name->set_text(u""_ustr);
    }
    if( const SfxStringItem* pRegressionXNameItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_XNAME ) )
    {
        OUString aName = pRegressionXNameItem->GetValue();
        m_xEE_XName->set_text(aName);
    }
    else
    {
        m_xEE_XName->set_text(u"x"_ustr);
    }
    if( const SfxStringItem* pRegressionYNameItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_YNAME ) )
    {
        OUString aName = pRegressionYNameItem->GetValue();
        m_xEE_YName->set_text(aName);
    }
    else
    {
        m_xEE_YName->set_text(u"f(x)"_ustr);
    }

    const SfxPoolItem* pPoolItem = nullptr;
    SfxItemState aState = rInAttrs.GetItemState( SCHATTR_REGRESSION_TYPE, true, &pPoolItem );
    m_bTrendLineUnique = ( aState != SfxItemState::INVALID );
    if( aState == SfxItemState::SET )
    {
        const SvxChartRegressItem * pItem = dynamic_cast< const SvxChartRegressItem * >( pPoolItem );
        if( pItem )
        {
            m_eTrendLineType = pItem->GetValue();
        }
    }

    if( const SfxInt32Item* pDegreeItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_DEGREE ) )
    {
        sal_Int32 nDegree = pDegreeItem->GetValue();
        m_xNF_Degree->set_value( nDegree );
    }
    else
    {
        m_xNF_Degree->set_value( 2 );
    }

    m_xNF_Degree->save_value();

    if( const SfxInt32Item* pPeriodItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_PERIOD ) )
    {
        sal_Int32 nPeriod = pPeriodItem->GetValue();
        m_xNF_Period->set_value( nPeriod );
    }
    else
    {
        m_xNF_Period->set_value( 2 );
    }

    m_xNF_Period->save_value();

    double nValue = 0.0;
    if( const SvxDoubleItem* pForwardItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_EXTRAPOLATE_FORWARD ) )
    {
        nValue = pForwardItem->GetValue() ;
    }
    lcl_setValue(*m_xFmtFld_ExtrapolateForward, nValue);

    nValue = 0.0;
    if( const SvxDoubleItem* pBackwardItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_EXTRAPOLATE_BACKWARD ) )
    {
        nValue = pBackwardItem->GetValue() ;
    }
    lcl_setValue(*m_xFmtFld_ExtrapolateBackward, nValue);

    nValue = 0.0;
    if( const SvxDoubleItem* pValueItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_INTERCEPT_VALUE ) )
    {
        nValue = pValueItem->GetValue() ;
    }
    lcl_setValue(*m_xFmtFld_InterceptValue, nValue);

    aState = rInAttrs.GetItemState( SCHATTR_REGRESSION_SET_INTERCEPT, true, &pPoolItem );
    if( aState == SfxItemState::INVALID )
    {
        m_xCB_SetIntercept->set_state(TRISTATE_INDET);
    }
    else
    {
        if( aState == SfxItemState::SET )
            m_xCB_SetIntercept->set_active( static_cast< const SfxBoolItem * >( pPoolItem )->GetValue());
    }

    aState = rInAttrs.GetItemState( SCHATTR_REGRESSION_SHOW_EQUATION, true, &pPoolItem );
    if( aState == SfxItemState::INVALID )
    {
        m_xCB_ShowEquation->set_state(TRISTATE_INDET);
    }
    else
    {
        if( aState == SfxItemState::SET )
            m_xCB_ShowEquation->set_active( static_cast< const SfxBoolItem * >( pPoolItem )->GetValue());
    }

    aState = rInAttrs.GetItemState( SCHATTR_REGRESSION_SHOW_COEFF, true, &pPoolItem );
    if( aState == SfxItemState::INVALID )
    {
        m_xCB_ShowCorrelationCoeff->set_state(TRISTATE_INDET);
    }
    else
    {
        if( aState == SfxItemState::SET )
            m_xCB_ShowCorrelationCoeff->set_active( static_cast< const SfxBoolItem * >( pPoolItem )->GetValue());
    }

    if( const SfxInt32Item* pMovingTypeItem = rInAttrs.GetItemIfSet( SCHATTR_REGRESSION_MOVING_TYPE ) )
    {
        sal_Int32 nMovingType = pMovingTypeItem->GetValue();
        if (nMovingType == MovingAverageType::Prior)
            m_xCB_RegressionMovingType->set_active(0);
        else if (nMovingType == MovingAverageType::Central)
            m_xCB_RegressionMovingType->set_active(1);
        else if (nMovingType == MovingAverageType::AveragedAbscissa)
            m_xCB_RegressionMovingType->set_active(2);
    }
    else
    {
        m_xCB_RegressionMovingType->set_active(0);
    }

    if( !m_bTrendLineUnique )
        return;

    switch( m_eTrendLineType )
    {
        case SvxChartRegress::Linear :
            m_xRB_Linear->set_active(true);
            break;
        case SvxChartRegress::Log :
            m_xRB_Logarithmic->set_active(true);
            break;
        case SvxChartRegress::Exp :
            m_xRB_Exponential->set_active(true);
            break;
        case SvxChartRegress::Power :
            m_xRB_Power->set_active(true);
            break;
        case SvxChartRegress::Polynomial :
            m_xRB_Polynomial->set_active(true);
            break;
        case SvxChartRegress::MovingAverage :
            m_xRB_MovingAverage->set_active(true);
            break;
        default:
            break;
    }
}

void TrendlineResources::FillItemSet(SfxItemSet* rOutAttrs) const
{
    if( m_bTrendLineUnique )
        rOutAttrs->Put( SvxChartRegressItem( m_eTrendLineType, SCHATTR_REGRESSION_TYPE ));

    if (m_eTrendLineType == SvxChartRegress::MovingAverage)
    {
        sal_Int32 nType = MovingAverageType::Prior;
        if (m_xCB_RegressionMovingType->get_active() == 1)
            nType = MovingAverageType::Central;
        else if (m_xCB_RegressionMovingType->get_active() == 2)
            nType = MovingAverageType::AveragedAbscissa;

        rOutAttrs->Put(SfxInt32Item(SCHATTR_REGRESSION_MOVING_TYPE, nType));
    }

    if( m_xCB_ShowEquation->get_state() != TRISTATE_INDET )
        rOutAttrs->Put( SfxBoolItem( SCHATTR_REGRESSION_SHOW_EQUATION, m_xCB_ShowEquation->get_active() ));

    if( m_xCB_ShowCorrelationCoeff->get_state() != TRISTATE_INDET )
        rOutAttrs->Put( SfxBoolItem( SCHATTR_REGRESSION_SHOW_COEFF, m_xCB_ShowCorrelationCoeff->get_active() ));

    OUString aName = m_xEE_Name->get_text();
    rOutAttrs->Put(SfxStringItem(SCHATTR_REGRESSION_CURVE_NAME, aName));
    aName = m_xEE_XName->get_text();
    if ( aName.isEmpty() )
        aName = "x";
    rOutAttrs->Put(SfxStringItem(SCHATTR_REGRESSION_XNAME, aName));
    aName = m_xEE_YName->get_text();
    if ( aName.isEmpty() )
        aName = "f(x)";
    rOutAttrs->Put(SfxStringItem(SCHATTR_REGRESSION_YNAME, aName));

    sal_Int32 aDegree = m_xNF_Degree->get_value();
    rOutAttrs->Put(SfxInt32Item( SCHATTR_REGRESSION_DEGREE, aDegree ) );

    sal_Int32 aPeriod = m_xNF_Period->get_value();
    rOutAttrs->Put(SfxInt32Item( SCHATTR_REGRESSION_PERIOD, aPeriod ) );

    sal_uInt32 nIndex = 0;
    double aValue = 0.0;
    (void)m_pNumFormatter->IsNumberFormat(m_xFmtFld_ExtrapolateForward->get_text(),nIndex,aValue);
    rOutAttrs->Put(SvxDoubleItem( aValue, SCHATTR_REGRESSION_EXTRAPOLATE_FORWARD ) );

    aValue = 0.0;
    (void)m_pNumFormatter->IsNumberFormat(m_xFmtFld_ExtrapolateBackward->get_text(),nIndex,aValue);
    rOutAttrs->Put(SvxDoubleItem( aValue, SCHATTR_REGRESSION_EXTRAPOLATE_BACKWARD ) );

    if( m_xCB_SetIntercept->get_state() != TRISTATE_INDET )
        rOutAttrs->Put( SfxBoolItem( SCHATTR_REGRESSION_SET_INTERCEPT, m_xCB_SetIntercept->get_active() ));

    aValue = 0.0;
    (void)m_pNumFormatter->IsNumberFormat(m_xFmtFld_InterceptValue->get_text(),nIndex,aValue);
    rOutAttrs->Put(SvxDoubleItem( aValue, SCHATTR_REGRESSION_INTERCEPT_VALUE ) );
}

void TrendlineResources::FillValueSets()
{
    m_xFI_Linear->set_from_icon_name(BMP_REGRESSION_LINEAR);
    m_xFI_Logarithmic->set_from_icon_name(BMP_REGRESSION_LOG);
    m_xFI_Exponential->set_from_icon_name(BMP_REGRESSION_EXP);
    m_xFI_Power->set_from_icon_name(BMP_REGRESSION_POWER);
    m_xFI_Polynomial->set_from_icon_name(BMP_REGRESSION_POLYNOMIAL);
    m_xFI_MovingAverage->set_from_icon_name(BMP_REGRESSION_MOVING_AVERAGE);
}

void TrendlineResources::UpdateControlStates()
{
    if( m_nNbPoints > 0 )
    {
        sal_Int32 nMaxValue = m_nNbPoints - 1 + (m_xCB_SetIntercept->get_active() ? 1 : 0);
        m_xNF_Degree->set_max(nMaxValue);
        m_xNF_Period->set_max(m_nNbPoints - 1);
    }
    bool bMovingAverage = ( m_eTrendLineType == SvxChartRegress::MovingAverage );
    bool bPolynomial = ( m_eTrendLineType == SvxChartRegress::Polynomial );
    bool bInterceptAvailable = ( m_eTrendLineType == SvxChartRegress::Linear )
                            || ( m_eTrendLineType == SvxChartRegress::Polynomial )
                            || ( m_eTrendLineType == SvxChartRegress::Exp );
    m_xFmtFld_ExtrapolateForward->set_sensitive( !bMovingAverage );
    m_xFmtFld_ExtrapolateBackward->set_sensitive( !bMovingAverage );
    m_xCB_SetIntercept->set_sensitive( bInterceptAvailable );
    m_xFmtFld_InterceptValue->set_sensitive( bInterceptAvailable );
    if( bMovingAverage )
    {
        m_xCB_ShowCorrelationCoeff->set_state(TRISTATE_FALSE);
    }
    m_xCB_ShowCorrelationCoeff->set_sensitive( !bMovingAverage );
    m_xCB_RegressionMovingType->set_sensitive(bMovingAverage);
    m_xNF_Period->set_sensitive(bMovingAverage);
    m_xNF_Degree->set_sensitive(bPolynomial);
    m_xEE_XName->set_sensitive( !bMovingAverage && m_xCB_ShowEquation->get_active() );
    m_xEE_YName->set_sensitive( !bMovingAverage && m_xCB_ShowEquation->get_active() );
}

IMPL_LINK(TrendlineResources, ChangeSpinValue, weld::SpinButton&, rNumericField, void)
{
    if (&rNumericField == m_xNF_Degree.get())
    {
        if (!m_xRB_Polynomial->get_active() && m_xNF_Degree->get_value_changed_from_saved())
        {
            m_xRB_Polynomial->set_active(true);
            SelectTrendLine(*m_xRB_Polynomial);
        }
    }
    else if (&rNumericField == m_xNF_Period.get())
    {
        if (!m_xRB_MovingAverage->get_active() && m_xNF_Period->get_value_changed_from_saved())
        {
            m_xRB_MovingAverage->set_active(true);
            SelectTrendLine(*m_xRB_MovingAverage);
        }
    }
    UpdateControlStates();
}

IMPL_LINK_NOARG(TrendlineResources, ChangeFormattedValue, weld::FormattedSpinButton&, void)
{
    if (!m_xCB_SetIntercept->get_active())
        m_xCB_SetIntercept->set_active(true);
    UpdateControlStates();
}

void TrendlineResources::SetNumFormatter( SvNumberFormatter* pFormatter )
{
    m_pNumFormatter = pFormatter;
    m_xFmtFld_ExtrapolateForward->GetFormatter().SetFormatter(m_pNumFormatter);
    m_xFmtFld_ExtrapolateBackward->GetFormatter().SetFormatter(m_pNumFormatter);
    m_xFmtFld_InterceptValue->GetFormatter().SetFormatter(m_pNumFormatter);
}

void TrendlineResources::SetNbPoints( sal_Int32 nNbPoints )
{
    m_nNbPoints = nNbPoints;
    UpdateControlStates();
}

IMPL_LINK_NOARG(TrendlineResources, ShowEquation, weld::Toggleable&, void)
{
    UpdateControlStates();
}

} //  namespace chart

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

quality94%

¤ Dauer der Verarbeitung: 0.8 Sekunden ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.