Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/dbaccess/source/ui/uno/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 14 kB image not shown  

Quelle  dbinteraction.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include "dbinteraction.hxx"
#include <comphelper/diagnose_ex.hxx>
#include <osl/diagnose.h>
#include <connectivity/dbexception.hxx>
#include <sqlmessage.hxx>
#include <com/sun/star/task/InteractionHandler.hpp>
#include <com/sun/star/task/XInteractionApprove.hpp>
#include <com/sun/star/task/XInteractionDisapprove.hpp>
#include <com/sun/star/task/XInteractionRetry.hpp>
#include <com/sun/star/task/XInteractionAbort.hpp>
#include <com/sun/star/sdb/XInteractionSupplyParameters.hpp>
#include <com/sun/star/sdb/XInteractionDocumentSave.hpp>
#include <sfx2/QuerySaveDocument.hxx>
#include <paramdialog.hxx>
#include <vcl/svapp.hxx>
#include <CollectionView.hxx>
#include <comphelper/sequenceashashmap.hxx>

extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_dbaccess_DatabaseInteractionHandler_get_implementation(
    css::uno::XComponentContext* context, css::uno::Sequence<css::uno::Any> const& )
{
    return cppu::acquire(new ::dbaui::SQLExceptionInteractionHandler(context));
}

extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
com_sun_star_comp_dbaccess_LegacyInteractionHandler_get_implementation(
    css::uno::XComponentContext* context, css::uno::Sequence<css::uno::Any> const& )
{
    return cppu::acquire(new ::dbaui::LegacyInteractionHandler(context));
}

namespace dbaui
{
    using namespace ::com::sun::star::uno;
    using namespace ::com::sun::star::ucb;
    using namespace ::com::sun::star::sdb;
    using namespace ::com::sun::star::task;
    using namespace ::dbtools;

    // BasicInteractionHandler
    BasicInteractionHandler::BasicInteractionHandler( const Reference< XComponentContext >&&nbsp;rxContext, const bool i_bFallbackToGeneric )
        :m_xContext( rxContext )
        ,m_bFallbackToGeneric( i_bFallbackToGeneric )
    {
        OSL_ENSURE( !m_bFallbackToGeneric,
            "BasicInteractionHandler::BasicInteractionHandler: enabling legacy behavior, there should be no clients of this anymore!" );
    }

    void SAL_CALL BasicInteractionHandler::initialize(const Sequence<Any>& rArgs)
    {
        comphelper::SequenceAsHashMap aMap(rArgs);
        m_xParentWindow.set(aMap.getValue(u"Parent"_ustr), UNO_QUERY);
    }

    sal_Bool SAL_CALL BasicInteractionHandler::handleInteractionRequest( const Reference< XInteractionRequest >& i_rRequest )
    {
        return impl_handle_throw( i_rRequest );
    }

    void SAL_CALL BasicInteractionHandler::handle( const Reference< XInteractionRequest >&&nbsp;i_rRequest )
    {
        impl_handle_throw( i_rRequest );
    }

    bool BasicInteractionHandler::impl_handle_throw( const Reference< XInteractionRequest >&&nbsp;i_Request )
    {
        Any aRequest( i_Request->getRequest() );
        OSL_ENSURE(aRequest.hasValue(), "BasicInteractionHandler::handle: invalid request!");
        if ( !aRequest.hasValue() )
            // no request -> no handling
            return false;

        Sequence< Reference< XInteractionContinuation > > aContinuations( i_Request->getContinuations() );

        // try to extract an SQLException (or one of its derived members
        SQLExceptionInfo aInfo( aRequest );
        if ( aInfo.isValid() )
        {
            implHandle( aInfo, aContinuations );
            return true;
        }

        ParametersRequest aParamRequest;
        if ( aRequest >>= aParamRequest )
        {
            implHandle( aParamRequest, aContinuations );
            return true;
        }

        DocumentSaveRequest aDocuRequest;
        if ( aRequest >>= aDocuRequest )
        {
            implHandle( aDocuRequest, aContinuations );
            return true;
        }

        if ( m_bFallbackToGeneric )
            return implHandleUnknown( i_Request );

        return false;
    }

    void BasicInteractionHandler::implHandle(const ParametersRequest& _rParamRequest, const Sequence< Reference< XInteractionContinuation > >& _rContinuations)
    {
        SolarMutexGuard aGuard;
        // want to open a dialog...

        sal_Int32 nAbortPos = getContinuation(ABORT, _rContinuations);
        sal_Int32 nParamPos = getContinuation(SUPPLY_PARAMETERS, _rContinuations);

        Reference< XInteractionSupplyParameters > xParamCallback;
        if (-1 != nParamPos)
            xParamCallback.set(_rContinuations[nParamPos], UNO_QUERY);
        OSL_ENSURE(xParamCallback.is(), "BasicInteractionHandler::implHandle(ParametersRequest): can't set the parameters without an appropriate interaction handler!s");

        OParameterDialog aDlg(Application::GetFrameWeld(m_xParentWindow), _rParamRequest.Parameters, _rParamRequest.Connection, m_xContext);
        sal_Int16 nResult = aDlg.run();
        try
        {
            switch (nResult)
            {
                case RET_OK:
                    if (xParamCallback.is())
                    {
                        xParamCallback->setParameters(aDlg.getValues());
                        xParamCallback->select();
                    }
                    break;
                default:
                    if (-1 != nAbortPos)
                        _rContinuations[nAbortPos]->select();
                    break;
            }
        }
        catchconst Exception& )
        {
            DBG_UNHANDLED_EXCEPTION("dbaccess");
        }
    }

    void BasicInteractionHandler::implHandle(const SQLExceptionInfo& _rSqlInfo, const Sequence< Reference< XInteractionContinuation > >& _rContinuations)
    {
        SolarMutexGuard aGuard;
        // want to open a dialog...

        sal_Int32 nApprovePos = getContinuation(APPROVE, _rContinuations);
        sal_Int32 nDisapprovePos = getContinuation(DISAPPROVE, _rContinuations);
        sal_Int32 nAbortPos = getContinuation(ABORT, _rContinuations);
        sal_Int32 nRetryPos = getContinuation(RETRY, _rContinuations);

        // determine the style of the dialog, dependent on the present continuation types
        MessBoxStyle nDialogStyle = MessBoxStyle::NONE;
        bool bHaveCancel = nAbortPos != -1;
        // "approve" means "Yes", "disapprove" means "No"
        // VCL only supports having both (which makes sense ...)
        if ( ( nApprovePos != -1 ) || ( nDisapprovePos != -1 ) )
            nDialogStyle = ( bHaveCancel ? MessBoxStyle::YesNoCancel : MessBoxStyle::YesNo ) | MessBoxStyle::DefaultYes;
        else
        {
            // if there's no yes/no, then use a default OK button
            nDialogStyle = ( bHaveCancel ? MessBoxStyle::OkCancel : MessBoxStyle::Ok ) | MessBoxStyle::DefaultOk;
        }

        // If there's a "Retry" continuation, have a "Retry" button
        if ( nRetryPos != -1 )
        {
            nDialogStyle = MessBoxStyle::RetryCancel | MessBoxStyle::DefaultRetry;
        }

        // execute the dialog
        OSQLMessageBox aDialog(nullptr, _rSqlInfo, nDialogStyle);
        // TODO: need a way to specify the parent window
        sal_Int16 nResult = aDialog.run();
        try
        {
            switch (nResult)
            {
                case RET_YES:
                case RET_OK:
                    if ( nApprovePos != -1 )
                        _rContinuations[ nApprovePos ]->select();
                    else
                        OSL_ENSURE( nResult != RET_YES, "BasicInteractionHandler::implHandle: no handler for YES!" );
                    break;

                case RET_NO:
                    if ( nDisapprovePos != -1 )
                        _rContinuations[ nDisapprovePos ]->select();
                    else
                        OSL_FAIL( "BasicInteractionHandler::implHandle: no handler for NO!" );
                    break;

                case RET_CANCEL:
                    if ( nAbortPos != -1 )
                        _rContinuations[ nAbortPos ]->select();
                    else if ( nDisapprovePos != -1 )
                        _rContinuations[ nDisapprovePos ]->select();
                    else
                        OSL_FAIL( "BasicInteractionHandler::implHandle: no handler for CANCEL!" );
                    break;
                case RET_RETRY:
                    if ( nRetryPos != -1 )
                        _rContinuations[ nRetryPos ]->select();
                    else
                        OSL_FAIL( "BasicInteractionHandler::implHandle: where does the RETRY come from?" );
                    break;
            }
        }
        catchconst Exception& )
        {
            DBG_UNHANDLED_EXCEPTION("dbaccess");
        }
    }
    void BasicInteractionHandler::implHandle(const DocumentSaveRequest& _rDocuRequest, const Sequence< Reference< XInteractionContinuation > >& _rContinuations)
    {
        SolarMutexGuard aGuard;
        // want to open a dialog...

        sal_Int32 nApprovePos = getContinuation(APPROVE, _rContinuations);
        sal_Int32 nDisApprovePos = getContinuation(DISAPPROVE, _rContinuations);
        sal_Int32 nAbortPos = getContinuation(ABORT, _rContinuations);

        short nRet = RET_YES;
        if ( -1 != nApprovePos )
        {
            // ask whether it should be saved
            nRet = ExecuteQuerySaveDocument(Application::GetFrameWeld(m_xParentWindow), _rDocuRequest.Name);
        }

        if ( RET_CANCEL == nRet )
        {
            if (-1 != nAbortPos)
                _rContinuations[nAbortPos]->select();
            return;
        }
        else if ( RET_YES == nRet )
        {
            sal_Int32 nDocuPos = getContinuation(SUPPLY_DOCUMENTSAVE, _rContinuations);

            if (-1 != nDocuPos)
            {
                Reference< XInteractionDocumentSave > xCallback(_rContinuations[nDocuPos], UNO_QUERY);
                OSL_ENSURE(xCallback.is(), "BasicInteractionHandler::implHandle(DocumentSaveRequest): can't save document without an appropriate interaction handler!s");

                OCollectionView aDlg(Application::GetFrameWeld(m_xParentWindow), _rDocuRequest.Content, _rDocuRequest.Name, m_xContext);
                sal_Int16 nResult = aDlg.run();
                try
                {
                    switch (nResult)
                    {
                        case RET_OK:
                            if (xCallback.is())
                            {
                                xCallback->setName(aDlg.getName(), aDlg.getSelectedFolder());
                                xCallback->select();
                            }
                            break;
                        default:
                            if (-1 != nAbortPos)
                                _rContinuations[nAbortPos]->select();
                            break;
                    }
                }
                catchconst Exception& )
                {
                    DBG_UNHANDLED_EXCEPTION("dbaccess");
                }
            }
            else if ( -1 != nApprovePos )
                _rContinuations[nApprovePos]->select();
        }
        else if ( -1 != nDisApprovePos )
                _rContinuations[nDisApprovePos]->select();
    }

    bool BasicInteractionHandler::implHandleUnknown( const Reference< XInteractionRequest >&&nbsp;_rxRequest )
    {
        if ( m_xContext.is() )
        {
            Reference< XInteractionHandler2 > xFallbackHandler(
                InteractionHandler::createWithParent(m_xContext, nullptr) );
            xFallbackHandler->handle( _rxRequest );
            return true;
        }
        return false;
    }

    sal_Int32 BasicInteractionHandler::getContinuation(Continuation _eCont, const Sequence< Reference< XInteractionContinuation > >& _rContinuations)
    {
        for (sal_Int32 i = 0; i < _rContinuations.getLength(); ++i)
        {
            switch (_eCont)
            {
                case APPROVE:
                    if (Reference<XInteractionApprove>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
                case DISAPPROVE:
                    if (Reference<XInteractionDisapprove>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
                case RETRY:
                    if (Reference<XInteractionRetry>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
                case ABORT:
                    if (Reference<XInteractionAbort>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
                case SUPPLY_PARAMETERS:
                    if (Reference<XInteractionSupplyParameters>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
                case SUPPLY_DOCUMENTSAVE:
                    if (Reference<XInteractionDocumentSave>(_rContinuations[i], UNO_QUERY).is())
                        return i;
                    break;
            }
        }

        return -1;
    }

    // SQLExceptionInteractionHandler
    OUString SAL_CALL SQLExceptionInteractionHandler::getImplementationName()
    {
        return u"com.sun.star.comp.dbaccess.DatabaseInteractionHandler"_ustr;
    }
    sal_Bool SAL_CALL SQLExceptionInteractionHandler::supportsService(const OUString&&nbsp;_rServiceName)
    {
        const css::uno::Sequence< OUString > aSupported(getSupportedServiceNames());
        for (const OUString& s : aSupported)
            if (s == _rServiceName)
                return true;

        return false;
    }
    css::uno::Sequence< OUString > SAL_CALL SQLExceptionInteractionHandler::getSupportedServiceNames()
    {
        return { u"com.sun.star.sdb.DatabaseInteractionHandler"_ustr };
    }

    // LegacyInteractionHandler
    OUString SAL_CALL LegacyInteractionHandler::getImplementationName()
    {
        return u"com.sun.star.comp.dbaccess.LegacyInteractionHandler"_ustr;
    }
    sal_Bool SAL_CALL LegacyInteractionHandler::supportsService(const OUString& _rServiceName)
    {
        const css::uno::Sequence< OUString > aSupported(getSupportedServiceNames());
        for (const OUString& s : aSupported)
            if (s == _rServiceName)
                return true;

        return false;
    }
    css::uno::Sequence< OUString > SAL_CALL LegacyInteractionHandler::getSupportedServiceNames()
    {
        return { u"com.sun.star.sdb.InteractionHandler"_ustr };
    }

}   // namespace dbaui

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=95 H=97 G=95

¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.