Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/include/unotools/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 6 kB image not shown  

Quelle  configpaths.hxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#ifndef INCLUDED_UNOTOOLS_CONFIGPATHS_HXX
#define INCLUDED_UNOTOOLS_CONFIGPATHS_HXX

#include <unotools/unotoolsdllapi.h>
#include <rtl/ustring.hxx>

namespace utl
{

    /** extract the local nodename and the parent nodepath
        from a configuration path.

        @param _sInPath
            A configuration path that is not an empty or root path.<BR/>
            If this is not a valid configuration path, it is interpreted as
            local name of a node.

        @param _rsOutPath
            On exit: The configuration path obtained by dropping
                     the last level off <var>_sInPath</var>.<BR/>
                     If <var>_sInPath</var> could not be parsed as a valid
                     configuration path, this is set to an empty string.

        @param _rsLocalName
            On exit: The plain (non-escaped) name of the node identified by
                     <var>_sInPath</var>. <BR/>
                     If <var>_sInPath</var> could not be parsed as a valid
                     configuration path, this is set to <var>_sInPath</var>.

        @returns
            <TRUE/>,  if a parent path could be set
            <FALSE/>, if the path was a one-level path or an invalid path

    */

    UNOTOOLS_DLLPUBLIC bool splitLastFromConfigurationPath(std::u16string_view _sInPath,
                                            OUString& _rsOutPath,
                                            OUString& _rsLocalName);

    /** extract the first nodename from a configuration path.

        @param _sInPath
            A relative configuration path that is not empty.<BR/>
            If this is not a valid configuration path, it is interpreted as
            a single name of a node.

        @param _sOutPath
            If non-null, contains the remainder of the path upon return.

        @returns
            The plain (non-escaped) name of the node that is the first step
            when traversing <var>_sInPath</var>.<BR/>
            If <var>_sInPath</var> could not be parsed as a valid
            configuration path, it is returned unaltered.

    */

    UNOTOOLS_DLLPUBLIC OUString extractFirstFromConfigurationPath(
        OUString const& _sInPath, OUString* _sOutPath = nullptr);

    /** check whether a path is to a nested node with respect to a parent path.

        @param _sNestedPath
            A configuration path that maybe points to a descendant of the node
            identified by <var>_sPrefixPath</var>, with both paths starting
            from the same node (or both being absolute).

        @param _sPrefixPath
            A configuration path.<BR/>
            If this path is absolute, <var>_sNestedPath</var> should be absolute;
            If this path is relative, <var>_sNestedPath</var> should be relative;
            If this path is empty,    <var>_sNestedPath</var> may start with a '/',
            which is disregarded.

        @returns
            <TRUE/>, if <var>_sPrefixPath</var> is  a prefix of <var>_sNestedPath</var>;
            <FALSE/> otherwise.<BR/>
            If both paths are equal <TRUE/> is returned.

    */

    bool isPrefixOfConfigurationPath(std::u16string_view _sNestedPath,
                                         std::u16string_view _sPrefixPath);

    /** get the relative path to a nested node with respect to a parent path.

        @param _sNestedPath
            A configuration path that points to a descendant of the node
            identified by <var>_sPrefixPath</var>, with both paths starting
            from the same node (or both being absolute).

        @param _sPrefixPath
            A configuration path.<BR/>
            If this path is absolute, <var>_sNestedPath</var> must be absolute;
            If this path is relative, <var>_sNestedPath</var> must be relative;
            If this path is empty, <var>_sNestedPath</var> may start with a '/',
            which is stripped.

        @returns
            The remaining relative path from the target of <var>_sPrefixPath</var>
            to the target of <var>_sNestedPath</var>.<BR/>
            If <var>_sPrefixPath</var> is not a prefix of <var>_sNestedPath</var>,
            <var>_sNestedPath</var> is returned unaltered.

    */

    UNOTOOLS_DLLPUBLIC OUString dropPrefixFromConfigurationPath(OUString const& _sNestedPath,
                                                    std::u16string_view _sPrefixPath);

    /** Create a one-level relative configuration path from a set element name
        without a known set element type.

        @param _sElementName
            An arbitrary string that is to be interpreted as
            name of a configuration set element.

        @returns
            A one-level relative path to the element, of the form
            "*['<Name>']", where <Name> is properly escaped.

    */

    UNOTOOLS_DLLPUBLIC OUString wrapConfigurationElementName(std::u16string_view _sElementName);

    /** Create a one-level relative configuration path from a set element name
        and a known set element type.

        @param _sElementName
            An arbitrary string that is to be interpreted as
            name of a configuration set element.

        @param _sTypeName
            An string identifying the type of the element. Usually this is be
            the name of the element-template of the set.<BR/>

        @returns
            A one-level relative path to the element, of the form
            "<Type>['<Name>']", where <Name> is properly escaped.

    */

    OUString wrapConfigurationElementName(std::u16string_view _sElementName,
                                                 OUString const& _sTypeName);

}   // namespace utl

#endif // INCLUDED_UNOTOOLS_CONFIGPATHS_HXX

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

100%


¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.