Spracherkennung für: .idl vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at
http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at
http://www.apache.org/licenses/LICENSE-2.0 .
*/
module com { module sun { module star { module drawing {
/** This is a set of properties to describe the style for rendering an area.
*/
published service FillProperties
{
/** This enumeration selects the style the area will be filled with.
*/
[property] FillStyle FillStyle;
/** If the property #FillStyle is set to
FillStyle::SOLID, this is the color used.
*/
[property] com::sun::star::util::Color FillColor;
/** This is the transparence of the filled area.
<p>This property is only valid if the property #FillStyle
is set to FillStyle::SOLID.
*/
[property] short FillTransparence;
/** If a gradient is used for transparency, this is the name of the
used transparence gradient style or it is empty. If you set the name
of a transparence gradient style contained in the document, this
style used.
*/
[property] string FillTransparenceGradientName;
/** This describes the transparency of the fill area as a gradient.
*/
[optional, property] com::sun::star::awt::Gradient FillTransparenceGradient;
/** If the property #FillStyle is set to
FillStyle::GRADIENT, this is the name of the used fill
gradient style.
*/
[property] string FillGradientName;
/** If the property #FillStyle is set to
FillStyle::GRADIENT, this describes the gradient used.
*/
[optional, property] com::sun::star::awt::Gradient FillGradient;
/** If the property #FillStyle is set to
FillStyle::HATCH, this is the name of the used fill hatch
style.
*/
[property] string FillHatchName;
/** If the property #FillStyle is set to
FillStyle::HATCH, this describes the hatch used.
*/
[optional, property] Hatch FillHatch;
/** if this is `TRUE`, the transparent background of a
hatch filled area is drawn in the current background color.
*/
[property] boolean FillBackground;
/** If the property #FillStyle is set to
FillStyle::BITMAP, this is the name of the used fill bitmap
style.
*/
[property] string FillBitmapName;
/** If the property #FillStyle is set to
FillStyle::BITMAP, this is the bitmap used.
*/
[optional, property] com::sun::star::awt::XBitmap FillBitmap;
/** If the property #FillStyle is set to
FillStyle::BITMAP, this is a URL to the bitmap used.
@deprecated as of LibreOffice 6.1, use FillBitmap
Note the new behaviour since it this was deprecated:
This property can only be set and only external URLs are
supported (no more vnd.sun.star.GraphicObject scheme). When a
URL is set, then it will load the bitmap and set the FillBitmap
property.
*/
[optional, property] string FillBitmapURL;
/** This is the horizontal offset where the tile starts.
<p>It is given in percent in relation to the width of the bitmap.</p>
*/
[property] short FillBitmapPositionOffsetX;
/** This is the vertical offset where the tile starts.
<p>It is given in percent in relation to the height of the bitmap.</p>
*/
[property] short FillBitmapPositionOffsetY;
/** Every second line of tiles is moved the given percent of the
width of the bitmap.
*/
[property] short FillBitmapOffsetX;
/** Every second row of tiles is moved the given percent of the
height of the bitmap.
*/
[property] short FillBitmapOffsetY;
/** The RectanglePoint specifies the position inside of the bitmap to
use as the top left position for rendering.
*/
[property] RectanglePoint FillBitmapRectanglePoint;
/** specifies if the size is given in percentage or as an absolute value.
<p>If this is `TRUE`, the properties #FillBitmapSizeX
and #FillBitmapSizeY contain the size of the tile in
percent of the size of the original bitmap. If this is `FALSE`, the
size of the tile is specified with 1/100th mm.
*/
[property] boolean FillBitmapLogicalSize;
/** This is the width of the tile for filling.
<p>Depending on the property #FillBitmapLogicalSize,
this is either relative or absolute.
*/
[property] long FillBitmapSizeX;
/** This is the height of the tile for filling.
<p>Depending on the property #FillBitmapLogicalSize,
this is either relative or absolute.
*/
[property] long FillBitmapSizeY;
/** this enum selects how an area is filled with a single bitmap.
<p>This property corresponds to the properties
#FillBitmapStretch and #FillBitmapTile.</p>
<p>If set to BitmapMode::REPEAT, the property
FillBitmapStretch is set to `FALSE`, and the property FillBitmapTile
is set to `TRUE`.</p>
<p>If set to BitmapMode::STRETCH, the property
FillBitmapStretch is set to `TRUE`, and the property FillBitmapTile
is set to `FALSE`.</p>
<p>If set to BitmapMode::NO_REPEAT, both properties
FillBitmapStretch and FillBitmapTile are set to `FALSE`.</p>
*/
[property] BitmapMode FillBitmapMode;
/** if set, the fill bitmap is stretched to fill the area of the shape.
<p>This property should not be used anymore and is included here for
completeness. The #FillBitmapMode property can be used
instead to set all supported bitmap modes.</p>
<p>If set to `TRUE`, the value of the FillBitmapMode property changes
to BitmapMode::STRETCH. BUT: behavior is undefined, if
the property #FillBitmapTile is `TRUE` too.</p>
<p>If set to `FALSE`, the value of the FillBitmapMode property
changes to BitmapMode::REPEAT or BitmapMode::NO_REPEAT,
depending on the current value of the
#FillBitmapTile property.</p>
*/
[optional, property] boolean FillBitmapStretch;
/** if set, the fill bitmap is repeated to fill the area of the shape.
<p>This property should not be used anymore and is included here for
completeness. The #FillBitmapMode property can be used
instead to set all supported bitmap modes.</p>
<p>If set to `TRUE`, the value of the FillBitmapMode property changes
to BitmapMode::REPEAT. BUT: behavior is undefined, if
the property #FillBitmapStretch is `TRUE` too.</p>
<p>If set to `FALSE`, the value of the FillBitmapMode property
changes to BitmapMode::STRETCH or BitmapMode::NO_REPEAT,
depending on the current value of the
#FillBitmapStretch property.</p>
*/
[optional, property] boolean FillBitmapTile;
/** contains the cropping of the object.
If the property #FillBitmapMode is set to BitmapMode::STRETCH,
this is the cropping, otherwise it is empty.
@see com::sun::star::text::GraphicCrop
@since LibreOffice 4.3
*/
[optional, property] com::sun::star::text::GraphicCrop GraphicCrop;
/** If this is `TRUE`, and FillStyle is FillStyle::NONE:
The area displays the slide background
@since LibreOffice 7.5
*/
[optional, property] boolean FillUseSlideBackground;
};
}; }; }; };
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
