Gedichte Musik Bilder Quellcodebibliothek Diashow Normaldarstellung
Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/LibreOffice/sd/source/ui/view/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 23 kB image not shown  

Quelle  drviewsj.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <DrawViewShell.hxx>
#include <com/sun/star/embed/EmbedMisc.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/presentation/ClickAction.hpp>
#include <sfx2/objsh.hxx>
#include <svx/svxids.hrc>
#include <svx/sdmetitm.hxx>
#include <editeng/flditem.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <svx/sdtfsitm.hxx>
#include <svx/svdopath.hxx>
#include <svx/obj3d.hxx>
#include <svx/scene3d.hxx>

#include <app.hrc>

#include <anminfo.hxx>
#include <drawdoc.hxx>
#include <drawview.hxx>
#include <ViewShellBase.hxx>

using namespace com::sun::star;

namespace sd {

/**
 * Set state (Enabled/Disabled) of Menu-SfxSlots
 */
void DrawViewShell::GetMenuStateSel( SfxItemSet &rSet )
{
    // Status of menu entries (Buttons,...)

    // Single selection
    const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
    const size_t nMarkCount = rMarkList.GetMarkCount();

    if ( nMarkCount == 1 )
    {
        if( SfxItemState::DEFAULT == rSet.GetItemState( SID_BEZIER_EDIT ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_UNGROUP ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_ENTER_GROUP ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_NAME_GROUP ) ||

            // #i68101#
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_TITLE_DESCRIPTION ) ||

            SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_STYLE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_USE_SLIDE_BACKGROUND ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_TRANSPARENCE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_FLOATTRANSPARENCE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_CHANGEBEZIER ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_CHANGEPOLYGON ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_LINEEND_POLYGON ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_MEASURE_DLG ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_CONNECTION_DLG ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_CONNECTION_NEW_ROUTING ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_SHEAR ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_LEFT ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_CENTER ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_RIGHT ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_UP ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_MIDDLE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_DOWN ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_TO_TOP ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_MOREFRONT ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_UP ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_MOREBACK ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_DOWN ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_TO_BOTTOM ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_BEFORE_OBJ ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_BEHIND_OBJ ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_REVERSE_ORDER ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_ORIGINAL_SIZE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_SAVE_GRAPHIC ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_COMPRESS_GRAPHIC ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_TEXTATTR_DLG ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_EXECUTE_ANIMATION_EFFECT ))
        {
            const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
            const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);
            const SdrOle2Obj* pSdrOle2Obj = dynamic_cast< const SdrOle2Obj* >(pObj);
            const SdAnimationInfo* pAnimationInfo
                = SdDrawDocument::GetAnimationInfo(rMarkList.GetMark(0)->GetMarkedSdrObj());
            SdrInventor nInv = pObj->GetObjInventor();
            SdrObjKind  nId  = pObj->GetObjIdentifier();
            SdrObjTransformInfoRec aInfoRec;
            pObj->TakeObjInfo( aInfoRec );

            // don't show original size entry if not possible
            if(pSdrOle2Obj)
            {
                if (pSdrOle2Obj->GetObjRef().is() &&
                    (pSdrOle2Obj->GetObjRef()->getStatus( pSdrOle2Obj->GetAspect() ) & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) )
                    rSet.DisableItem(SID_ORIGINAL_SIZE);
            }

            if(!pSdrGrafObj)
            {
                rSet.DisableItem(SID_SAVE_GRAPHIC);
                rSet.DisableItem(SID_COMPRESS_GRAPHIC);
            }

            if (!pAnimationInfo
                || pAnimationInfo->meClickAction == presentation::ClickAction::ClickAction_NONE
                // Sound does not work in edit mode
                || pAnimationInfo->meClickAction == presentation::ClickAction::ClickAction_SOUND
                // No point in exiting the presentation in edit mode
                || pAnimationInfo->meClickAction
                       == presentation::ClickAction::ClickAction_STOPPRESENTATION)
            {
                rSet.DisableItem(SID_EXECUTE_ANIMATION_EFFECT);
            }

            /* If it is not a group object or 3D object, we disable "enter
               group". */
            const auto* pSdrObjGroup = dynamic_cast<const SdrObjGroup*>(pObj);

            if( !( ( pSdrObjGroup != nullptr && nInv == SdrInventor::Default ) ||
                   DynCastE3dScene(pObj) ) )
            {
                rSet.DisableItem( SID_ENTER_GROUP );
            }

            // Don't allow enter Diagrams
            if(nullptr != pSdrObjGroup && pSdrObjGroup->isDiagram())
            {
                rSet.DisableItem( SID_ENTER_GROUP );
            }

            // If it is not a group object, we disable "ungroup"
            if(pSdrObjGroup == nullptr || nInv != SdrInventor::Default)
            {
                rSet.DisableItem(SID_UNGROUP);
            }

            // Support advanced DiagramHelper
            if(!pSdrObjGroup || !pSdrObjGroup->isDiagram())
            {
                rSet.DisableItem( SID_REGENERATE_DIAGRAM );
                rSet.DisableItem( SID_EDIT_DIAGRAM );
            }

            if( nInv == SdrInventor::Default &&
               (nId == SdrObjKind::Line ||
                nId == SdrObjKind::PolyLine ||
                nId == SdrObjKind::PathLine ||
                nId == SdrObjKind::FreehandLine ))
            {
                //rSet.DisableItem( SID_ATTRIBUTES_AREA ); // remove again!
                rSet.DisableItem( SID_ATTR_FILL_STYLE );
                rSet.DisableItem( SID_ATTR_FILL_USE_SLIDE_BACKGROUND );
                rSet.DisableItem( SID_ATTR_FILL_TRANSPARENCE );
                rSet.DisableItem( SID_ATTR_FILL_FLOATTRANSPARENCE );
            }
            if( (dynamic_cast< const SdrPathObj *>( pObj ) ==  nullptr&& !aInfoRec.bCanConvToPath) || dynamic_cast< const SdrObjGroup *>( pObj ) !=  nullptr ) // As long as JOE handles it incorrectly!
            { // JOE: a group object may can be converted into a PathObj
                rSet.DisableItem( SID_LINEEND_POLYGON );
            }
            if(nInv == SdrInventor::Default &&
               (nId == SdrObjKind::PathFill || nId == SdrObjKind::PathLine || !aInfoRec.bCanConvToPath))
                rSet.DisableItem( SID_CHANGEBEZIER );

            if( nInv == SdrInventor::Default &&
                ( nId == SdrObjKind::Polygon || nId == SdrObjKind::PolyLine || !aInfoRec.bCanConvToPoly ) &&
                !GetView()->IsVectorizeAllowed() )
            {
                rSet.DisableItem( SID_CHANGEPOLYGON );
            }

            if(nInv == SdrInventor::Default && nId == SdrObjKind::Table )
            {
                rSet.DisableItem( SID_TEXTATTR_DLG );
            }

            if( nInv != SdrInventor::Default || nId != SdrObjKind::Measure )
                rSet.DisableItem( SID_MEASURE_DLG );

            if( nInv != SdrInventor::Default || nId != SdrObjKind::Edge )
                rSet.DisableItem( SID_CONNECTION_DLG );
            else
            {
                bool bDisable = true;
                SfxItemSet aAttrSet( GetDoc()->GetPool() );
                GetView()->GetAttributes( aAttrSet );

                if( aAttrSet.GetItemState( SDRATTR_EDGELINE1DELTA ) >= SfxItemState::DEFAULT &&
                    aAttrSet.GetItemState( SDRATTR_EDGELINE2DELTA ) >= SfxItemState::DEFAULT &&
                    aAttrSet.GetItemState( SDRATTR_EDGELINE3DELTA ) >= SfxItemState::DEFAULT )
                {
                    ::tools::Long nVal1 = aAttrSet.Get( SDRATTR_EDGELINE1DELTA ).GetValue();
                    ::tools::Long nVal2 = aAttrSet.Get( SDRATTR_EDGELINE2DELTA ).GetValue();
                    ::tools::Long nVal3 = aAttrSet.Get( SDRATTR_EDGELINE3DELTA ).GetValue();
                    {
                        if( nVal1 != 0 || nVal2 != 0 || nVal3 != 0 )
                            bDisable = false;
                    }
                }
                if( bDisable )
                    rSet.DisableItem( SID_CONNECTION_NEW_ROUTING );
            }

            if ( nInv == SdrInventor::E3d                          ||
                 (!mpDrawView->IsConvertToPathObjPossible() &&
                  !mpDrawView->IsShearAllowed()                  &&
                  !mpDrawView->IsDistortAllowed()) )
            {
                rSet.DisableItem( SID_OBJECT_SHEAR );
            }

            if(dynamic_cast< const E3dCompoundObject *>( pObj ) !=  nullptr)
            {
                rSet.DisableItem( SID_OBJECT_ALIGN );
                rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
                rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
                rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
                rSet.DisableItem( SID_OBJECT_ALIGN_UP );
                rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
                rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );
                rSet.DisableItem( SID_FRAME_TO_TOP );
                rSet.DisableItem( SID_MOREFRONT );
                rSet.DisableItem( SID_FRAME_UP );
                rSet.DisableItem( SID_MOREBACK );
                rSet.DisableItem( SID_FRAME_DOWN );
                rSet.DisableItem( SID_FRAME_TO_BOTTOM );
                rSet.DisableItem( SID_BEFORE_OBJ );
                rSet.DisableItem( SID_BEHIND_OBJ );
                rSet.DisableItem( SID_REVERSE_ORDER );
                rSet.DisableItem( SID_POSITION );
            }
        }

        if( SfxItemState::DEFAULT == rSet.GetItemState( SID_DISMANTLE ) ||
            SfxItemState::DEFAULT == rSet.GetItemState( SID_BREAK ) )
        {
            if ( !mpDrawView->IsDismantlePossible() )
            {
                rSet.DisableItem( SID_DISMANTLE );
            }

            if ( !mpDrawView->IsDismantlePossible(true) &&
                 !mpDrawView->IsImportMtfPossible()     &&
                 !mpDrawView->IsBreak3DObjPossible() )
            {
                rSet.DisableItem( SID_BREAK );
            }
        }
        if( SfxItemState::DEFAULT == rSet.GetItemState( SID_MODIFY_FIELD ) )
        {
            OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();

            if( pOLV )
            {
                const SvxFieldItem* pFldItem = pOLV->GetFieldAtSelection();

                if( !( pFldItem && (nullptr != dynamic_cast< const SvxDateField *>( pFldItem->GetField() ) ||
                                 nullptr != dynamic_cast< const SvxAuthorField *>( pFldItem->GetField() ) ||
                                 nullptr != dynamic_cast< const SvxExtFileField *>( pFldItem->GetField() ) ||
                                 nullptr != dynamic_cast< const SvxExtTimeField *>( pFldItem->GetField() ) ) ) )
                {
                    rSet.DisableItem( SID_MODIFY_FIELD );
                }
            }
            else
                rSet.DisableItem( SID_MODIFY_FIELD );
        }
        if( SfxItemState::DEFAULT == rSet.GetItemState( SID_OUTLINE_TEXT_AUTOFIT ) )
        {
            const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
            const SdrTextFitToSizeTypeItem* pItem = pObj->GetMergedItemSet().GetItem<SdrTextFitToSizeTypeItem>(SDRATTR_TEXT_FITTOSIZE);
            const bool bSet = pItem && pItem->GetValue() != drawing::TextFitToSizeType_NONE;
            rSet.Put(SfxBoolItem(SID_OUTLINE_TEXT_AUTOFIT, bSet));
        }

        rSet.DisableItem(SID_GROUP);
        rSet.DisableItem(SID_TEXT_COMBINE);
        rSet.DisableItem(SID_COMBINE);
        rSet.DisableItem(SID_DISTRIBUTE_HLEFT);
        rSet.DisableItem(SID_DISTRIBUTE_HCENTER);
        rSet.DisableItem(SID_DISTRIBUTE_HDISTANCE);
        rSet.DisableItem(SID_DISTRIBUTE_HRIGHT);
        rSet.DisableItem(SID_DISTRIBUTE_VTOP);
        rSet.DisableItem(SID_DISTRIBUTE_VCENTER);
        rSet.DisableItem(SID_DISTRIBUTE_VDISTANCE);
        rSet.DisableItem(SID_DISTRIBUTE_VBOTTOM);
        rSet.DisableItem(SID_POLY_MERGE);
        rSet.DisableItem(SID_POLY_SUBSTRACT);
        rSet.DisableItem(SID_POLY_INTERSECT);
        rSet.DisableItem(SID_EQUALIZEWIDTH);
        rSet.DisableItem(SID_EQUALIZEHEIGHT);
        rSet.DisableItem(SID_CONNECT);
    }
    // multi-selection
    else if( nMarkCount > 1 )
    {
        // distribute dialog for 3+n objects
        if(nMarkCount <= 2)
        {
            rSet.DisableItem(SID_DISTRIBUTE_HLEFT);
            rSet.DisableItem(SID_DISTRIBUTE_HCENTER);
            rSet.DisableItem(SID_DISTRIBUTE_HDISTANCE);
            rSet.DisableItem(SID_DISTRIBUTE_HRIGHT);
            rSet.DisableItem(SID_DISTRIBUTE_VTOP);
            rSet.DisableItem(SID_DISTRIBUTE_VCENTER);
            rSet.DisableItem(SID_DISTRIBUTE_VDISTANCE);
            rSet.DisableItem(SID_DISTRIBUTE_VBOTTOM);
        }

        rSet.DisableItem( SID_LINEEND_POLYGON );
        rSet.DisableItem( SID_ENTER_GROUP );
        // Now names for objects have to be unique
        rSet.DisableItem( SID_NAME_GROUP );
        // #i68101#
        rSet.DisableItem( SID_OBJECT_TITLE_DESCRIPTION );
        rSet.DisableItem( SID_MODIFY_FIELD );

        {
            bool bText = false;
            bool bLine = false;
            bool bGroup = false;
            bool bDrawObj = false;
            bool b3dObj = false;
            bool bTable = false;
            bool bMeasureObj = false;
            bool bEdgeObj = false; // Connector
            bool bE3dCompoundObject = false;

            for( size_t i = 0; i < nMarkCount && !bText && i < 50; ++i )
            {
                SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
                SdrInventor nInv = pObj->GetObjInventor();
                SdrObjKind  nId  = pObj->GetObjIdentifier();

                if (nInv == SdrInventor::Default)
                {
                    switch (nId)
                    {
                        case SdrObjKind::Text: bText = true; break;

                        case SdrObjKind::Line: bLine = true; break;

                        case SdrObjKind::Edge: bEdgeObj = true; break;

                        case SdrObjKind::Measure: bMeasureObj = true; break;

                        case SdrObjKind::Rectangle:
                        case SdrObjKind::CircleOrEllipse:
                        case SdrObjKind::FreehandLine:
                        case SdrObjKind::FreehandFill:
                        case SdrObjKind::PathFill:
                        case SdrObjKind::PathLine:
                        case SdrObjKind::CircleSection:
                        case SdrObjKind::CircleArc:
                        case SdrObjKind::CircleCut: bDrawObj = true; break;

                        case SdrObjKind::Group: bGroup = true; break;

                        case SdrObjKind::Graphic: break;

                        case SdrObjKind::Table: bTable = true; break;
                        default: ;
                    }
                }
                else if (nInv == SdrInventor::E3d)
                {
                    if(DynCastE3dScene(pObj))
                        b3dObj = true;
                    else if(dynamic_cast< const E3dCompoundObject* >(pObj) !=  nullptr)
                        bE3dCompoundObject = true;
                }
            }
            if( bLine && !bText && !bDrawObj &&!b3dObj)
            {
                rSet.DisableItem( SID_ATTR_FILL_STYLE );
                rSet.DisableItem( SID_ATTR_FILL_USE_SLIDE_BACKGROUND );
                rSet.DisableItem( SID_ATTR_FILL_TRANSPARENCE );
                rSet.DisableItem( SID_ATTR_FILL_FLOATTRANSPARENCE );
            }
            if( !bEdgeObj )
                rSet.DisableItem( SID_CONNECTION_DLG );

            if (b3dObj)
            {
                rSet.DisableItem( SID_COMBINE );
                rSet.DisableItem(SID_POLY_MERGE);
                rSet.DisableItem(SID_POLY_SUBSTRACT);
                rSet.DisableItem(SID_POLY_INTERSECT);
                rSet.DisableItem(SID_EQUALIZEWIDTH);
                rSet.DisableItem(SID_EQUALIZEHEIGHT);
            }

            if (b3dObj                                        ||
                 (!mpDrawView->IsConvertToPathObjPossible() &&
                  !mpDrawView->IsShearAllowed()             &&
                  !mpDrawView->IsDistortAllowed()) )
            {
                rSet.DisableItem( SID_OBJECT_SHEAR );
            }

            if( !bGroup )
            {
                rSet.DisableItem( SID_UNGROUP );
            }
            if( bTable )
                rSet.DisableItem( SID_TEXTATTR_DLG );

            if( !bMeasureObj )
                rSet.DisableItem( SID_MEASURE_DLG );

            if(bE3dCompoundObject)
            {
                rSet.DisableItem( SID_OBJECT_ALIGN );
                rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
                rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
                rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
                rSet.DisableItem( SID_OBJECT_ALIGN_UP );
                rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
                rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );
                rSet.DisableItem( SID_FRAME_TO_TOP );
                rSet.DisableItem( SID_MOREFRONT );
                rSet.DisableItem( SID_FRAME_UP );
                rSet.DisableItem( SID_MOREBACK );
                rSet.DisableItem( SID_FRAME_DOWN );
                rSet.DisableItem( SID_FRAME_TO_BOTTOM );
                rSet.DisableItem( SID_BEFORE_OBJ );
                rSet.DisableItem( SID_BEHIND_OBJ );
                rSet.DisableItem( SID_REVERSE_ORDER );
                rSet.DisableItem( SID_POSITION );
            }
        }

        if ( !mpDrawView->IsDismantlePossible() )
        {
            rSet.DisableItem( SID_DISMANTLE );
        }
        if ( !mpDrawView->IsDismantlePossible(true) &&
             !mpDrawView->IsImportMtfPossible()     &&
             !mpDrawView->IsBreak3DObjPossible() )
        {
            rSet.DisableItem( SID_BREAK );
        }
        if ( !mpDrawView->IsCombinePossible() )
        {
            rSet.DisableItem(SID_COMBINE);
            rSet.DisableItem(SID_POLY_MERGE);
            rSet.DisableItem(SID_POLY_SUBSTRACT);
            rSet.DisableItem(SID_POLY_INTERSECT);
            rSet.DisableItem(SID_EQUALIZEWIDTH);
            rSet.DisableItem(SID_EQUALIZEHEIGHT);
        }
        if ( !mpDrawView->IsCombinePossible(true) )
        {
            rSet.DisableItem( SID_CONNECT );
        }
        if ( !mpDrawView->IsGroupPossible() )
        {
            rSet.DisableItem( SID_GROUP );
        }
        if ( !mpDrawView->IsUnGroupPossible() )
        {
            rSet.DisableItem( SID_UNGROUP );
        }
    }
    // select no object
    else
    {
        rSet.DisableItem(SID_SETLAYER);
        rSet.DisableItem( SID_ENTER_GROUP );
        rSet.DisableItem( SID_CUT );
        rSet.DisableItem( SID_COPY );
        rSet.DisableItem( SID_DELETE );
        rSet.DisableItem( SID_ATTR_TRANSFORM );

        rSet.DisableItem( SID_OBJECT_ALIGN );
        rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
        rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
        rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
        rSet.DisableItem( SID_OBJECT_ALIGN_UP );
        rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
        rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );

        rSet.DisableItem( SID_FRAME_TO_TOP );
        rSet.DisableItem( SID_MOREFRONT );
        rSet.DisableItem( SID_FRAME_UP );
        rSet.DisableItem( SID_MOREBACK );
        rSet.DisableItem( SID_FRAME_DOWN );
        rSet.DisableItem( SID_FRAME_TO_BOTTOM );
        rSet.DisableItem( SID_BEFORE_OBJ );
        rSet.DisableItem( SID_BEHIND_OBJ );
        rSet.DisableItem( SID_POSITION );

        rSet.DisableItem( SID_SIZE_OPTIMAL );
        rSet.DisableItem( SID_LINEEND_POLYGON );
        rSet.DisableItem( SID_COPYOBJECTS );
        rSet.DisableItem( SID_HORIZONTAL );
        rSet.DisableItem( SID_VERTICAL );
        rSet.DisableItem( SID_FLIP_HORIZONTAL );
        rSet.DisableItem( SID_FLIP_VERTICAL );
        rSet.DisableItem( SID_GROUP );
        rSet.DisableItem( SID_UNGROUP );
        rSet.DisableItem( SID_NAME_GROUP );

        // #i68101#
        rSet.DisableItem( SID_OBJECT_TITLE_DESCRIPTION );

        rSet.DisableItem( SID_DISMANTLE );
        rSet.DisableItem( SID_BREAK );
        rSet.DisableItem( SID_TEXT_COMBINE );
        rSet.DisableItem( SID_COMBINE );
        rSet.DisableItem(SID_DISTRIBUTE_DLG);
        rSet.DisableItem(SID_DISTRIBUTE_HLEFT);
        rSet.DisableItem(SID_DISTRIBUTE_HCENTER);
        rSet.DisableItem(SID_DISTRIBUTE_HDISTANCE);
        rSet.DisableItem(SID_DISTRIBUTE_HRIGHT);
        rSet.DisableItem(SID_DISTRIBUTE_VTOP);
        rSet.DisableItem(SID_DISTRIBUTE_VCENTER);
        rSet.DisableItem(SID_DISTRIBUTE_VDISTANCE);
        rSet.DisableItem(SID_DISTRIBUTE_VBOTTOM);
        rSet.DisableItem(SID_POLY_MERGE);
        rSet.DisableItem(SID_POLY_SUBSTRACT);
        rSet.DisableItem(SID_POLY_INTERSECT);
        rSet.DisableItem(SID_EQUALIZEWIDTH);
        rSet.DisableItem(SID_EQUALIZEHEIGHT);
        rSet.DisableItem( SID_CONNECT );
        rSet.DisableItem( SID_ANIMATION_EFFECTS );
        rSet.DisableItem( SID_EXECUTE_ANIMATION_EFFECT );
        rSet.DisableItem( SID_MODIFY_FIELD );
        rSet.DisableItem (SID_OBJECT_SHEAR);
    }

    if (GetObjectShell()->isContentExtractionLocked())
    {
        rSet.DisableItem(SID_COPY);
        rSet.DisableItem(SID_CUT);
    }
    if(GetObjectShell()->isExportLocked())
    {
        rSet.DisableItem(SID_SAVE_GRAPHIC);
        rSet.DisableItem(SID_EXTERNAL_EDIT);
    }
    if (GetDoc()->getImagePreferredDPI() <= 0)
    {
        rSet.DisableItem(SID_GRAPHIC_SIZE_CHECK);
    }
}

const SdViewOptions& DrawViewShell::GetViewOptions() const
{
    return GetViewShellBase().GetViewOptions();
}

void DrawViewShell::SetViewOptions(const SdViewOptions& rOptions)
{
    GetViewShellBase().SetViewOptions(rOptions);
}

} // end of namespace sd

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=92 H=96 G=93

¤ Dauer der Verarbeitung: 0.15 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland




Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.