/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
namespace
{ /// Covers sw/source/core/objectpositioning/ fixes. class Test : public SwModelTestBase
{ public:
Test()
: SwModelTestBase(u"/sw/qa/core/objectpositioning/data/"_ustr)
{
}
};
CPPUNIT_TEST_FIXTURE(Test, testOverlapCrash)
{ // Load a document with 2 images.
createSwDoc("overlap-crash.odt");
// Change their anchor type to to-char.
uno::Reference<beans::XPropertySet> xShape1(getShape(1), uno::UNO_QUERY);
xShape1->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
uno::Reference<beans::XPropertySet> xShape2(getShape(1), uno::UNO_QUERY);
xShape2->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
// Insert a new paragraph at the start.
SwDocShell* pDocShell = getSwDocShell();
SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); // Without the accompanying fix in place, this test would have crashed.
pWrtShell->SplitNode();
}
CPPUNIT_TEST_FIXTURE(Test, testVertPosFromBottom)
{ // Create a document, insert a shape and position it 1cm above the bottom of the body area.
createSwDoc();
uno::Reference<css::lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShape->setSize(awt::Size(10000, 10000));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
xShapeProps->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapeProps->setPropertyValue(u"VertOrient"_ustr, uno::Any(text::VertOrientation::NONE));
xShapeProps->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
xShapeProps->setPropertyValue(u"VertOrientPosition"_ustr,
uno::Any(static_cast<sal_Int32>(-11000)));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY);
xDrawPageSupplier->getDrawPage()->add(xShape);
// Verify that the distance between the body and anchored object bottom is indeed around 1cm.
xmlDocUniquePtr pXmlDoc = parseLayoutDump();
sal_Int32 nBodyBottom = getXPath(pXmlDoc, "//body/infos/bounds", "bottom").toInt32();
sal_Int32 nAnchoredBottom
= getXPath(pXmlDoc, "//anchored/SwAnchoredDrawObject/bounds", "bottom").toInt32(); // Without the accompanying fix in place, this test would have failed with: // - Expected: 565 // - Actual : 9035 // i.e. the vertical position was from-top, not from-bottom.
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(565), nBodyBottom - nAnchoredBottom);
}
CPPUNIT_TEST_FIXTURE(Test, testVertAlignBottomMargin)
{ // Create a document, insert three shapes and align it the bottom,center,top of page print area bottom. // The size of shapes are 284 ~ 0.5cm // The height of page print area bottom is 1134 ~ 2cm
createSwDoc();
uno::Reference<css::lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
//Create first shape and align bottom of page print area bottom.
uno::Reference<drawing::XShape> xShapeBottom(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeBottom->setSize(awt::Size(500, 500));
uno::Reference<beans::XPropertySet> xShapePropsBottom(xShapeBottom, uno::UNO_QUERY);
xShapePropsBottom->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsBottom->setPropertyValue(u"VertOrient"_ustr,
uno::Any(text::VertOrientation::BOTTOM));
xShapePropsBottom->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierBottom(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierBottom->getDrawPage()->add(xShapeBottom);
//Create second shape and align center of page print area bottom.
uno::Reference<drawing::XShape> xShapeCenter(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeCenter->setSize(awt::Size(500, 500));
uno::Reference<beans::XPropertySet> xShapePropsCenter(xShapeCenter, uno::UNO_QUERY);
xShapePropsCenter->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsCenter->setPropertyValue(u"VertOrient"_ustr,
uno::Any(text::VertOrientation::CENTER));
xShapePropsCenter->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierCenter(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierCenter->getDrawPage()->add(xShapeCenter);
//Create third shape and align top of page print area bottom.
uno::Reference<drawing::XShape> xShapeTop(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeTop->setSize(awt::Size(500, 500));
uno::Reference<beans::XPropertySet> xShapePropsTop(xShapeTop, uno::UNO_QUERY);
xShapePropsTop->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsTop->setPropertyValue(u"VertOrient"_ustr, uno::Any(text::VertOrientation::TOP));
xShapePropsTop->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierTop(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierTop->getDrawPage()->add(xShapeTop);
// Verify that the distance between the bottom of page and bottom of first shape is around 0cm. (align=bottom)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nFirstShapeBottom - nPageBottom); // Verify that the distance between the bottom of page and bottom of second shape is around 0.75cm and // verify that the distance between the bottom of body and top of second shape is around 0.75cm.(align=center)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(424), nPageBottom - nSecondShapeBottom);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(425), nSecondShapeTop - nBodyBottom); // Verify that the distance between the bottom of body and top of third shape is around 0cm. (align=top)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(0), nThirdShapeTop - nBodyBottom);
}
CPPUNIT_TEST_FIXTURE(Test, testVertAlignBottomMarginWithFooter)
{ // Load an empty document with footer.
createSwDoc("bottom-margin-with-footer.docx");
uno::Reference<css::lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
// Insert three shapes and align it the bottom,center,top of page print area bottom. // The height of page print area bottom is 2268 ~ 4cm. // The size of shapes are 567 ~ 1cm // Create first shape and align bottom of page print area bottom.
uno::Reference<drawing::XShape> xShapeBottom(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeBottom->setSize(awt::Size(1000, 1000));
uno::Reference<beans::XPropertySet> xShapePropsBottom(xShapeBottom, uno::UNO_QUERY);
xShapePropsBottom->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsBottom->setPropertyValue(u"VertOrient"_ustr,
uno::Any(text::VertOrientation::BOTTOM));
xShapePropsBottom->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierBottom(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierBottom->getDrawPage()->add(xShapeBottom);
// Create second shape and align center of page print area bottom.
uno::Reference<drawing::XShape> xShapeCenter(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeCenter->setSize(awt::Size(1000, 1000));
uno::Reference<beans::XPropertySet> xShapePropsCenter(xShapeCenter, uno::UNO_QUERY);
xShapePropsCenter->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsCenter->setPropertyValue(u"VertOrient"_ustr,
uno::Any(text::VertOrientation::CENTER));
xShapePropsCenter->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierCenter(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierCenter->getDrawPage()->add(xShapeCenter);
// Create third shape and align top of page print area bottom.
uno::Reference<drawing::XShape> xShapeTop(
xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
xShapeTop->setSize(awt::Size(1000, 1000));
uno::Reference<beans::XPropertySet> xShapePropsTop(xShapeTop, uno::UNO_QUERY);
xShapePropsTop->setPropertyValue(u"AnchorType"_ustr,
uno::Any(text::TextContentAnchorType_AT_CHARACTER));
xShapePropsTop->setPropertyValue(u"VertOrient"_ustr, uno::Any(text::VertOrientation::TOP));
xShapePropsTop->setPropertyValue(u"VertOrientRelation"_ustr,
uno::Any(text::RelOrientation::PAGE_PRINT_AREA_BOTTOM));
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplierTop(mxComponent, uno::UNO_QUERY);
xDrawPageSupplierTop->getDrawPage()->add(xShapeTop);
// Verify that the distance between the bottom of page and bottom of first shape is around 0cm. (align=bottom)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nFirstShapeBottom - nPageBottom); // Verify that the distance between the bottom of page and bottom of second shape is around 1.5cm and // verify that the distance between the bottom of body and top of second shape is around 1.5cm.(align=center)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(849), nPageBottom - nSecondShapeBottom);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(850), nSecondShapeTop - nBodyBottom); // Verify that the distance between the bottom of body and top of third shape is around 0cm. (align=top)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(0), nThirdShapeTop - nBodyBottom);
}
CPPUNIT_TEST_FIXTURE(Test, testInsideOutsideVertAlignBottomMargin)
{ // Load a document, with two shapes. // The shapes align the outside and inside of page print area bottom.
createSwDoc("inside-outside-vert-align.docx");
// Verify that the distance between the bottom of page and bottom of first shape is around 0cm. (align=outside)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(3), nPageBottom - nFirstShapeOutside); // Verify that the distance between the bottom of body and top of second shape is around 0cm. (align=inside)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(0), nBodyBottom - nSecondShapeInside);
}
CPPUNIT_TEST_FIXTURE(Test, testVMLVertAlignBottomMargin)
{ // Load a document, with five shapes. // The shapes align the top,center,bottom,outside and inside of page print area bottom. // The height of page print area bottom is 4320 ~ 7.62cm. // The size of shapes are 442 ~ 0.78cm
createSwDoc("vml-vertical-alignment.docx");
// Verify that the distance between the bottom of body and top of first VMLshape is around 0cm. (align=inside)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nBodyBottom - nFirstVMLShapeInside); // Verify that the distance between the bottom of page and bottom of second VMLshape is around 0cm. (align=bottom)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nSecondVMLShapeBottom - nPageBottom); // Verify that the distance between the bottom of page and bottom of third VMLshape is around 3.4cm and // verify that the distance between the bottom of body and top of third shape is around 3.4cm.(align=center)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1938), nPageBottom - nThirdVMLShapeCenterBottom);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1938), nThirdVMLShapeCenterTop - nBodyBottom); // Verify that the distance between the bottom of body and top of fourth VMLshape is around 0cm. (align=top)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nBodyBottom - nFourthVMLShapeTop); // Verify that the distance between the bottom of page and bottom of fifth shape is around 0cm. (align=outside)
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), nFifthVMLShapeOutside - nPageBottom);
}
CPPUNIT_TEST_FIXTURE(Test, testFloatingTableOverlapNever)
{ // Given a document with two floating tables, positioned in a way that normally these would // overlap, but SwFormatWrapInfluenceOnObjPos::mbAllowOverlap == false explicitly asks to avoid // overlaps:
createSwDoc("floattable-tbl-overlap.docx");
// When laying out that document:
calcLayout();
// Then make sure no overlap happens:
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage1 = dynamic_cast<SwPageFrame*>(pLayout->Lower());
CPPUNIT_ASSERT(pPage1);
CPPUNIT_ASSERT(pPage1->GetSortedObjs()); const SwSortedObjs& rPage1Objs = *pPage1->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(2), rPage1Objs.size()); auto pFlyFrame1 = rPage1Objs[0]->DynCastFlyFrame(); auto pFlyFrame2 = rPage1Objs[1]->DynCastFlyFrame(); // Without the accompanying fix in place, this test would have failed with: // - Expected greater than: 2291 // - Actual : 2175 // i.e. the 2nd floating table overlapped with the first one.
CPPUNIT_ASSERT_GREATER(pFlyFrame1->getFrameArea().Bottom(), pFlyFrame2->getFrameArea().Top());
}
CPPUNIT_TEST_FIXTURE(Test, testFloatingTableVertOrientTop)
{ // Given a document with a vert-orient=from-top anchored floating table:
createSwDoc("floattable-vert-orient-top.odt");
// When laying out that document:
calcLayout();
// Then make sure we correctly split the table to two pages: // Without the accompanying fix in place, this test would have produced a layout loop.
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage1 = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage1);
CPPUNIT_ASSERT(pPage1->GetSortedObjs()); const SwSortedObjs& rPage1Objs = *pPage1->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage1Objs.size()); auto pPage2 = pPage1->GetNext()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage2);
CPPUNIT_ASSERT(pPage2->GetSortedObjs()); const SwSortedObjs& rPage2Objs = *pPage2->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage2Objs.size());
}
CPPUNIT_TEST_FIXTURE(Test, testFloatingTableFollowWrongPage)
{ // Given a document with text on 2 pages, the first page has a fly frame that can split:
createSwDoc("floattable-follow-on-wrong-page.odt");
// When increasing the top and bottom margins from 0.5cm to 2.5cm:
SwDoc* pDoc = getSwDoc();
SwPageDesc aStandard(pDoc->GetPageDesc(0));
SvxULSpaceItem aPageMargin(aStandard.GetMaster().GetULSpace());
aPageMargin.SetUpper(1417);
aPageMargin.SetLower(1417);
aStandard.GetMaster().SetFormatAttr(aPageMargin);
pDoc->ChgPageDesc(0, aStandard);
// Then make sure the first and second page has fly frames:
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage1 = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage1);
CPPUNIT_ASSERT(pPage1->GetSortedObjs()); const SwSortedObjs& rPage1Objs = *pPage1->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage1Objs.size()); auto pPage2 = pPage1->GetNext()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage2); // Without the accompanying fix in place, this test would have failed, page 2 had no fly frame // (page 3 had one).
CPPUNIT_ASSERT(pPage2->GetSortedObjs()); const SwSortedObjs& rPage2Objs = *pPage2->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage2Objs.size());
}
CPPUNIT_TEST_FIXTURE(Test, testFloatingTableOverlapCell)
{ // Given a document with floating tables, overlapping, but anchored to different table cells:
createSwDoc("floattable-overlap-cell.docx");
// When laying out the document: // Without the accompanying fix in place, this resulted in a layout loop.
calcLayout();
// Then make sure the layout doesn't loop and results in a single page:
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage1 = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage1);
CPPUNIT_ASSERT(!pPage1->GetNext());
}
CPPUNIT_TEST_FIXTURE(Test, testDoNotMirrorRtlDrawObjsLayout)
{ // Given a document with an RTL paragraph, Word-style compat flag is enabled:
createSwDoc();
SwDoc* pDoc = getSwDoc(); auto& rIDSA = pDoc->getIDocumentSettingAccess();
rIDSA.set(DocumentSettingId::DO_NOT_MIRROR_RTL_DRAW_OBJS, true);
SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell();
SwView& rView = pWrtShell->GetView();
SfxItemSetFixed<RES_FRMATR_BEGIN, RES_FRMATR_END> aSet(rView.GetPool());
SvxFrameDirectionItem aDirection(SvxFrameDirection::Horizontal_RL_TB, RES_FRAMEDIR);
aSet.Put(aDirection);
pWrtShell->SetAttrSet(aSet, SetAttrMode::DEFAULT, nullptr, /*bParagraphSetting=*/true);
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPageFrame = pLayout->Lower()->DynCastPageFrame();
SwFrame* pBodyFrame = pPageFrame->GetLower();
// When inserting a graphic on the middle of the right margin:
SfxItemSet aFrameSet(pDoc->GetAttrPool(), svl::Items<RES_FRMATR_BEGIN, RES_FRMATR_END - 1>);
SwFormatAnchor aAnchor(RndStdIds::FLY_AT_CHAR);
aFrameSet.Put(aAnchor); // Default margin is 1440, this is 1440/2.
SwFormatFrameSize aSize(SwFrameSize::Fixed, 720, 720);
aFrameSet.Put(aSize); // This is 1440/4.
SwFormatHoriOrient aOrient(pBodyFrame->getFrameArea().Right() + 360);
aFrameSet.Put(aOrient);
Graphic aGrf;
pWrtShell->SwFEShell::Insert(OUString(), OUString(), &aGrf, &aFrameSet);
// Then make sure that the image is on the right margin:
SwTwips nBodyRight = pBodyFrame->getFrameArea().Right();
CPPUNIT_ASSERT(pPageFrame->GetSortedObjs()); const SwSortedObjs& rPageObjs = *pPageFrame->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPageObjs.size()); const SwAnchoredObject* pAnchored = rPageObjs[0];
Point aAnchoredCenter = pAnchored->GetDrawObj()->GetLastBoundRect().Center(); // Without the accompanying fix in place, this test would have failed with: // - Expected greater than: 11389 // - Actual : 643 // i.e. the graphic was on the left margin, not on the right margin.
CPPUNIT_ASSERT_GREATER(nBodyRight, aAnchoredCenter.getX());
}
CPPUNIT_TEST_FIXTURE(Test, testDoNotCaptureDrawObjsOnPageDrawWrapNone)
{ // Given a document with a draw object on page 2, wrap type is set to none (not through):
createSwDoc("do-not-capture-draw-objs-on-page-draw-wrap-none.docx");
// When laying out that document:
calcLayout();
// Then make sure the draw object is captured on page 2:
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage1 = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage1); auto pPage2 = pPage1->GetNext()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage2);
CPPUNIT_ASSERT(pPage2->GetSortedObjs()); const SwSortedObjs& rPage2Objs = *pPage2->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(2), rPage2Objs.size());
SwAnchoredObject* pDrawObj = rPage2Objs[0];
CPPUNIT_ASSERT_EQUAL(static_cast<sal_uInt16>(RES_DRAWFRMFMT),
pDrawObj->GetFrameFormat()->Which());
SwTwips nDrawObjTop = pDrawObj->GetObjRect().Top();
SwTwips nPage2Top = pPage2->getFrameArea().Top(); // Without the accompanying fix in place, this test would have failed with: // - Expected greater than: 17383 // - Actual : 13518 // i.e. the draw object was way above the page 2 rectangle, instead of inside it (apart from // some <1px difference).
CPPUNIT_ASSERT_GREATER(nPage2Top - MINFLY, nDrawObjTop);
}
CPPUNIT_TEST_FIXTURE(Test, testInsertShapeOnAsCharImg_tdf16890)
{ // Given a document with an image anchored as character
createSwDoc("as_char_image.docx");
SwDoc* pDoc = getSwDoc();
// Insert a shape over it
uno::Sequence<beans::PropertyValue> aArgs(
comphelper::InitPropertySequence({ { "KeyModifier", uno::Any(KEY_MOD1) } }));
dispatchCommand(mxComponent, ".uno:BasicShapes.rectangle", aArgs);
// Check that the new shape is anchored at para (i.e. has an anchor node) constauto& rFrmFormats = *pDoc->GetSpzFrameFormats();
CPPUNIT_ASSERT_EQUAL(size_t(o3tl::make_unsigned(2)), rFrmFormats.size()); auto pShape = rFrmFormats[1];
CPPUNIT_ASSERT(pShape); // Without the accompanying fix in place, this test would have failed with: // assertion failed // - Expression: pShape->GetAnchor().GetAnchorNode()
CPPUNIT_ASSERT(pShape->GetAnchor().GetAnchorNode());
}
CPPUNIT_TEST_FIXTURE(Test, testDoNotCaptureDrawObjsDrawObjNoCapture)
{ // Given a document with a draw object, which is positioned outside the page frame:
createSwDoc("do-not-capture-draw-objs-draw-obj-no-capture.docx");
// When laying out that document:
calcLayout();
// Then make sure the draw object is not captured on page 1:
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout(); auto pPage = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage);
CPPUNIT_ASSERT(pPage->GetSortedObjs()); const SwSortedObjs& rPageObjs = *pPage->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPageObjs.size());
SwAnchoredObject* pDrawObj = rPageObjs[0];
CPPUNIT_ASSERT_EQUAL(static_cast<sal_uInt16>(RES_DRAWFRMFMT),
pDrawObj->GetFrameFormat()->Which());
SwTwips nDrawObjLeft = pDrawObj->GetObjRect().Left();
SwTwips nPageLeft = pPage->getFrameArea().Left(); // Without the accompanying fix in place, this test would have failed with: // - Expected greater than: 284 // - Actual : 284 // i.e. the draw object was captured inside the page frame, but it was not in Word.
CPPUNIT_ASSERT_GREATER(nDrawObjLeft, nPageLeft);
}
CPPUNIT_TEST_FIXTURE(Test, testFloattableNestedOverlap)
{ // Given a document with an outer inline table, an inner floating table, the floating table's // overlap is set to 'never':
createSwDoc("floattable-nested-overlap.docx");
// When laying out that document:
calcLayout();
// Then make sure the content fits two pages and the floating table is split:
SwDoc* pDoc = getSwDoc();
SwRootFrame* pLayout = pDoc->getIDocumentLayoutAccess().GetCurrentLayout();
SwPageFrame* pPage1 = pLayout->Lower()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage1);
CPPUNIT_ASSERT(pPage1->GetSortedObjs()); const SwSortedObjs& rPage1Objs = *pPage1->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage1Objs.size());
SwPageFrame* pPage2 = pPage1->GetNext()->DynCastPageFrame();
CPPUNIT_ASSERT(pPage2);
CPPUNIT_ASSERT(pPage2->GetSortedObjs()); const SwSortedObjs& rPage2Objs = *pPage2->GetSortedObjs();
CPPUNIT_ASSERT_EQUAL(static_cast<size_t>(1), rPage2Objs.size()); // Without the accompanying fix in place, this test would have failed, the content was laid out // on 3 pages in Writer.
CPPUNIT_ASSERT(!pPage2->GetNext());
}
}
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
