/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sfx2/viewfrm.hxx>
#include <svl/style.hxx>
#include <svtools/unitconv.hxx>
#include <sal/log.hxx>
#include <view.hxx>
#include <wrtsh.hxx>
#include <docsh.hxx>
#include <charfmt.hxx>
#include <docstyle.hxx>
#include <lineinfo.hxx>
#include <linenum.hxx>
#include <swmodule.hxx>
#include <uitool.hxx>
#include <usrpref.hxx>
#include <wdocsh.hxx>
#include <fmtline.hxx>
#include <strings.hrc>
#include <IDocumentStylePoolAccess.hxx>
static rtl::Reference<SwDocStyleSheet> lcl_getDocStyleSheet(
const OUString& rName,
SwWrtShell *pSh)
{
SfxStyleSheetBasePool* pBase = pSh->GetView().GetDocShell()->GetStyleSheetPool();
SfxStyleSheetBase* pStyle = pBase->Find(rName, SfxStyleFamily::Para);
SAL_WARN_IF( !pStyle, "sw.ui" , "Style not found" );
if (!pStyle)
return nullptr;
return new SwDocStyleSheet(*static_cast <SwDocStyleSheet*>(pStyle));
}
static void lcl_setLineNumbering(const OUString& rName, SwWrtShell* pSh, bool bLineNumber)
{
rtl::Reference<SwDocStyleSheet> xStyleSheet = lcl_getDocStyleSheet(rName, pSh);
if (!xStyleSheet.is())
return ;
SfxItemSet& rSet = xStyleSheet->GetItemSet();
SwFormatLineNumber aFormat;
aFormat.SetCountLines(bLineNumber);
rSet.Put(aFormat);
xStyleSheet->MergeIndentAttrsOfListStyle( rSet );
xStyleSheet->SetItemSet(rSet);
}
SwLineNumberingDlg::SwLineNumberingDlg(const SwView& rVw)
: SfxDialogController(rVw.GetViewFrame().GetFrameWeld(),
u"modules/swriter/ui/linenumbering.ui" _ustr, u"LineNumberingDialog" _ustr)
, m_pSh(rVw.GetWrtShellPtr())
, m_xBodyContent(m_xBuilder->weld_widget(u"content" _ustr))
, m_xDivIntervalFT(m_xBuilder->weld_widget(u"every" _ustr))
, m_xDivIntervalNF(m_xBuilder->weld_spin_button(u"linesspin" _ustr))
, m_xDivRowsFT(m_xBuilder->weld_widget(u"lines" _ustr))
, m_xNumIntervalNF(m_xBuilder->weld_spin_button(u"intervalspin" _ustr))
, m_xCharStyleLB(m_xBuilder->weld_combo_box(u"styledropdown" _ustr))
, m_xFormatLB(new SwNumberingTypeListBox(m_xBuilder->weld_combo_box(u"formatdropdown" _ustr)))
, m_xPosLB(m_xBuilder->weld_combo_box(u"positiondropdown" _ustr))
, m_xOffsetMF(m_xBuilder->weld_metric_spin_button(u"spacingspin" _ustr, FieldUnit::CM))
, m_xDivisorED(m_xBuilder->weld_entry(u"textentry" _ustr))
, m_xCountEmptyLinesCB(m_xBuilder->weld_check_button(u"blanklines" _ustr))
, m_xCountFrameLinesCB(m_xBuilder->weld_check_button(u"linesintextframes" _ustr))
, m_xRestartEachPageCB(m_xBuilder->weld_check_button(u"restarteverynewpage" _ustr))
, m_xNumberingOnCB(m_xBuilder->weld_check_button(u"shownumbering" _ustr))
, m_xNumberingOnFooterHeader(m_xBuilder->weld_check_button(u"showfooterheadernumbering" _ustr))
, m_xOKButton(m_xBuilder->weld_button(u"ok" _ustr))
, m_xNumIntervalFT(m_xBuilder->weld_widget(u"interval" _ustr))
, m_xNumRowsFT(m_xBuilder->weld_widget(u"intervallines" _ustr))
{
m_xFormatLB->Reload(SwInsertNumTypes::Extended);
OUString sIntervalName = m_xDivIntervalFT->get_accessible_name()
+ "("
+ m_xDivRowsFT->get_accessible_name()
+ ")" ;
m_xDivIntervalNF->set_accessible_name(sIntervalName);
sIntervalName = m_xNumIntervalFT->get_accessible_name()
+ "("
+ m_xNumRowsFT->get_accessible_name()
+ ")" ;
m_xNumIntervalNF->set_accessible_name(sIntervalName);
// char styles
::FillCharStyleListBox(*m_xCharStyleLB, m_pSh->GetView().GetDocShell());
const SwLineNumberInfo &rInf = m_pSh->GetLineNumberInfo();
IDocumentStylePoolAccess& rIDSPA = m_pSh->getIDocumentStylePoolAccess();
OUString sStyleName(rInf.GetCharFormat( rIDSPA )->GetName().toString());
const int nPos = m_xCharStyleLB->find_text(sStyleName);
if (nPos != -1)
m_xCharStyleLB->set_active(nPos);
else
{
if (!sStyleName.isEmpty())
{
m_xCharStyleLB->append_text(sStyleName);
m_xCharStyleLB->set_active_text(sStyleName);
}
}
// format
SvxNumType nSelFormat = rInf.GetNumType().GetNumberingType();
m_xFormatLB->SelectNumberingType(nSelFormat);
// position
m_xPosLB->set_active(rInf.GetPos());
// offset
sal_uInt16 nOffset = rInf.GetPosFromLeft();
if (nOffset == USHRT_MAX)
nOffset = 0;
FieldUnit eFieldUnit = SwModule::get()->GetUsrPref(dynamic_cast < const SwWebDocShell*>(
rVw.GetDocShell()) != nullptr)->GetMetric();
::SetFieldUnit(*m_xOffsetMF, eFieldUnit);
m_xOffsetMF->set_value(m_xOffsetMF->normalize(nOffset), FieldUnit::TWIP);
// numbering offset
m_xNumIntervalNF->set_value(rInf.GetCountBy());
// divider
m_xDivisorED->set_text(rInf.GetDivider());
// divider offset
m_xDivIntervalNF->set_value(rInf.GetDividerCountBy());
// count
m_xCountEmptyLinesCB->set_active(rInf.IsCountBlankLines());
m_xCountFrameLinesCB->set_active(rInf.IsCountInFlys());
m_xRestartEachPageCB->set_active(rInf.IsRestartEachPage());
m_xNumberingOnCB->set_active(rInf.IsPaintLineNumbers());
// Header/Footer Line Numbering
rtl::Reference< SwDocStyleSheet > xStyleSheet = lcl_getDocStyleSheet(SwResId(STR_POOLCOLL_FOOTER), m_pSh);
if (xStyleSheet.is())
{
SfxItemSet& rSet = xStyleSheet->GetItemSet();
const SwFormatLineNumber &aFormat = rSet.Get(RES_LINENUMBER);
if (aFormat.IsCount())
m_xNumberingOnFooterHeader->set_state(TRISTATE_TRUE);
else
m_xNumberingOnFooterHeader->set_state(TRISTATE_FALSE);
}
// Line Numbering
m_xNumberingOnCB->connect_toggled(LINK(this , SwLineNumberingDlg, LineOnOffHdl));
m_xDivisorED->connect_changed(LINK(this , SwLineNumberingDlg, ModifyHdl));
ModifyHdl(*m_xDivisorED);
LineOnOffHdl(*m_xNumberingOnCB);
m_xOKButton->connect_clicked(LINK(this , SwLineNumberingDlg, OKHdl));
}
SwLineNumberingDlg::~SwLineNumberingDlg()
{
}
IMPL_LINK_NOARG(SwLineNumberingDlg, OKHdl, weld::Button&, void )
{
SwLineNumberInfo aInf(m_pSh->GetLineNumberInfo());
// char styles
OUString sCharFormatName(m_xCharStyleLB->get_active_text());
SwCharFormat *pCharFormat = m_pSh->FindCharFormatByName(UIName(sCharFormatName));
if (!pCharFormat)
{
SfxStyleSheetBasePool* pPool = m_pSh->GetView().GetDocShell()->GetStyleSheetPool();
SfxStyleSheetBase* pBase;
pBase = pPool->Find(sCharFormatName, SfxStyleFamily::Char );
if (!pBase)
pBase = &pPool->Make(sCharFormatName, SfxStyleFamily::Char );
pCharFormat = static_cast <SwDocStyleSheet*>(pBase)->GetCharFormat();
}
if (pCharFormat)
aInf.SetCharFormat(pCharFormat);
// format
SvxNumberType aType;
aType.SetNumberingType(m_xFormatLB->GetSelectedNumberingType());
aInf.SetNumType(aType);
// position
aInf.SetPos(static_cast <LineNumberPosition>(m_xPosLB->get_active()));
// offset
aInf.SetPosFromLeft(o3tl::narrowing<sal_uInt16>(m_xOffsetMF->denormalize(m_xOffsetMF->get_value(FieldUnit::TWIP))));
// numbering offset
aInf.SetCountBy(o3tl::narrowing<sal_uInt16>(m_xNumIntervalNF->get_value()));
// divider
aInf.SetDivider(m_xDivisorED->get_text());
// divider offset
aInf.SetDividerCountBy(o3tl::narrowing<sal_uInt16>(m_xDivIntervalNF->get_value()));
// count
aInf.SetCountBlankLines(m_xCountEmptyLinesCB->get_active());
aInf.SetCountInFlys(m_xCountFrameLinesCB->get_active());
aInf.SetRestartEachPage(m_xRestartEachPageCB->get_active());
aInf.SetPaintLineNumbers(m_xNumberingOnCB->get_active());
m_pSh->SetLineNumberInfo(aInf);
// Set LineNumber explicitly for Header and Footer
lcl_setLineNumbering(SwResId(STR_POOLCOLL_FOOTER), m_pSh, m_xNumberingOnFooterHeader->get_active());
lcl_setLineNumbering(SwResId(STR_POOLCOLL_HEADER), m_pSh, m_xNumberingOnFooterHeader->get_active());
if ( m_xNumberingOnFooterHeader->get_active())
m_xNumberingOnFooterHeader->set_state(TRISTATE_TRUE);
else
m_xNumberingOnFooterHeader->set_state(TRISTATE_FALSE);
m_xDialog->response(RET_OK);
}
// modify
IMPL_LINK_NOARG(SwLineNumberingDlg, ModifyHdl, weld::Entry&, void )
{
bool bEnable = m_xNumberingOnCB->get_active() && !m_xDivisorED->get_text().isEmpty();
m_xDivIntervalFT->set_sensitive(bEnable);
m_xDivIntervalNF->set_sensitive(bEnable);
m_xDivRowsFT->set_sensitive(bEnable);
}
// On/Off
IMPL_LINK_NOARG(SwLineNumberingDlg, LineOnOffHdl, weld::Toggleable&, void )
{
bool bEnable = m_xNumberingOnCB->get_active();
m_xBodyContent->set_sensitive(bEnable);
ModifyHdl(*m_xDivisorED);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Messung V0.5 C=91 H=100 G=95
¤ Dauer der Verarbeitung: 0.4 Sekunden
¤
*© Formatika GbR, Deutschland