Spracherkennung für: .rst vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
.. SPDX-License-Identifier: GPL-2.0
Kernel driver tps25990
======================
Supported chips:
* TI TPS25990
Prefix: 'tps25990'
* Datasheet
Publicly available at Texas Instruments website:
https://www.ti.com/lit/gpn/tps25990
Author:
Jerome Brunet <jbrunet@baylibre.com>
Description
-----------
This driver implements support for TI TPS25990 eFuse.
This is an integrated, high-current circuit protection and power
management device with PMBUS interface
Device compliant with:
- PMBus rev 1.3 interface.
Device supports direct format for reading input voltages,
output voltage, input current, input power and temperature.
Due to the specificities of the chip, all history reset attributes
are tied together. Resetting the history of a sensor, resets the
history of all the sensors.
The driver exports the following attributes via the 'sysfs' files
for input current:
**curr1_average**
**curr1_crit**
**curr1_crit_alarm**
**curr1_highest**
**curr1_input**
**curr1_label**
**curr1_max**
**curr1_max_alarm**
**curr1_reset_history**
The driver provides the following attributes for main input voltage:
**in1_average**
**in1_crit**
**in1_crit_alarm**
**in1_highest**
**in1_input**
**in1_label**
**in1_lcrit**
**in1_lcrit_alarm**
**in1_lowest**
**in1_max**
**in1_max_alarm**
**in1_min**
**in1_min_alarm**
**in1_reset_history**
The driver provides the following attributes for auxiliary input voltage:
**in2_input**
**in2_label**
The driver provides the following attributes for output voltage:
**in3_average**
**in3_input**
**in3_label**
**in3_lowest**
**in3_min**
**in3_min_alarm**
**in3_reset_history**
The driver provides the following attributes for input power:
**power1_alarm**
**power1_average**
**power1_input**
**power1_input_highest**
**power1_label**
**power1_max**
**power1_reset_history**
The driver provides the following attributes for temperature:
**temp1_average**
**temp1_crit**
**temp1_crit_alarm**
**temp1_highest**
**temp1_input**
**temp1_max**
**temp1_max_alarm**
**temp1_reset_history**
The driver provides the following attributes for sampling:
**samples**
