// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for peripherals on the AXS10x mainboard
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*/
/ {
aliases {
ethernet = &gmac;
};
axs10x_mb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x0 0xe0000000 0x10000000>;
interrupt-parent = <&mb_intc>;
creg_rst: reset-controller@11220 {
compatible = "snps,axs10x-reset";
#reset-cells = <1>;
reg = <0x11220 0x4>;
};
i2sclk: i2sclk@100a0 {
compatible = "snps,axs10x-i2s-pll-clock";
reg = <0x100a0 0x10>;
clocks = <&i2spll_clk>;
#clock-cells = <0>;
};
clocks {
i2spll_clk: i2spll_clk {
compatible = "fixed-clock";
clock-frequency = <27000000>;
#clock-cells = <0>;
};
i2cclk: i2cclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
apbclk: apbclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
mmcclk: mmcclk {
compatible = "fixed-clock";
/*
* DW sdio controller has external ciu clock divider
* controlled via register in SDIO IP. It divides
* sdio_ref_clk (which comes from CGU) by 16 for
* default. So default mmcclk clock (which comes
* to sdk_in) is 25000000 Hz.
*/
clock-frequency = <25000000>;
#clock-cells = <0>;
};
};
pguclk: pguclk@10080 {
compatible = "snps,axs10x-pgu-pll-clock";
reg = <0x10080 0x10>, <0x110 0x10>;
#clock-cells = <0>;
clocks = <&input_clk>;
};
gmac: ethernet@18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
interrupts = < 4 >;
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,pbl = < 32 >;
snps,multicast-filter-bins = <256>;
clocks = <&apbclk>;
clock-names = "stmmaceth";
max-speed = <100>;
resets = <&creg_rst 5>;
reset-names = "stmmaceth";
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};
usb@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
usb@60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
};
/*
* According to DW Mobile Storage databook it is required
* to use "Hold Register" if card is enumerated in SDR12 or
* SDR25 modes.
*
* Utilization of "Hold Register" is already implemented via
* dw_mci_pltfm_prepare_command() which in its turn gets
* used through dw_mci_drv_data->prepare_command call-back.
* This call-back is used in Altera Socfpga platform and so
* we may reuse it saying that we're compatible with their
* "altr,socfpga-dw-mshc".
*
* Most probably "Hold Register" utilization is platform-
* independent requirement which means that single unified
* "snps,dw-mshc" should be enough for all users of DW MMC once
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
mmc@15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
fifo-depth = < 16 >;
card-detect-delay = < 200 >;
clocks = <&apbclk>, <&mmcclk>;
clock-names = "biu", "ciu";
interrupts = < 7 >;
bus-width = < 4 >;
};
uart@20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
interrupts = <17>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
uart@21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
interrupts = <18>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
/* UART muxed with USB data port (ttyS3) */
uart@22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
interrupts = <19>;
baud = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
};
i2c@1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <14>;
};
i2s: i2s@1e000 {
compatible = "snps,designware-i2s";
reg = <0x1e000 0x100>;
clocks = <&i2sclk 0>;
clock-names = "i2sclk";
interrupts = <15>;
#sound-dai-cells = <0>;
};
i2c@1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1f000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <16>;
adv7511:adv7511@39{
compatible="adi,adv7511";
reg = <0x39>;
interrupts = <23>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,clock-delay = <0x03>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
/* RGB/YUV input */
port@0 {
reg = <0>;
adv7511_input:endpoint {
remote-endpoint = <&pgu_output>;
};
};
/* HDMI output */
port@1 {
reg = <1>;
adv7511_output: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
eeprom@54{
compatible = "atmel,24c01";
reg = <0x54>;
pagesize = <0x8>;
};
eeprom@57{
compatible = "atmel,24c04";
reg = <0x57>;
pagesize = <0x8>;
};
};
hdmi0: connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7511_output>;
};
};
};
gpio0:gpio@13000 {
compatible = "snps,dw-apb-gpio";
reg = <0x13000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio0_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
reg = <0>;
};
gpio0_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
reg = <1>;
};
gpio0_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
reg = <2>;
};
};
gpio1:gpio@14000 {
compatible = "snps,dw-apb-gpio";
reg = <0x14000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
gpio1_banka: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <30>;
reg = <0>;
};
gpio1_bankb: gpio-controller@1 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <10>;
reg = <1>;
};
gpio1_bankc: gpio-controller@2 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
reg = <2>;
};
};
pgu@17000 {
compatible = "snps,arcpgu";
reg = <0x17000 0x400>;
clocks = <&pguclk>;
clock-names = "pxlclk";
memory-region = <&frame_buffer>;
port {
pgu_output: endpoint {
remote-endpoint = <&adv7511_input>;
};
};
};
sound_playback {
compatible = "simple-audio-card";
simple-audio-card,name = "AXS10x HDMI Audio";
simple-audio-card,format = "i2s";
simple-audio-card,cpu {
sound-dai = <&i2s>;
};
simple-audio-card,codec {
sound-dai = <&adv7511>;
};
};
};
};
[ Dauer der Verarbeitung: 0.14 Sekunden
(vorverarbeitet)
]
