Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm/boot/dts/ti/omap/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  dra7-evm-common.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
 */

#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ti-dra7-atl.h>
#include <dt-bindings/input/input.h>

/ {
 chosen {
  stdout-path = &uart1;
 };

 extcon_usb1: extcon_usb1 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 };

 extcon_usb2: extcon_usb2 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 };

 sound0: sound0 {
  compatible = "simple-audio-card";
  simple-audio-card,name = "DRA7xx-EVM";
  simple-audio-card,widgets =
   "Headphone", "Headphone Jack",
   "Line", "Line Out",
   "Microphone", "Mic Jack",
   "Line", "Line In";
  simple-audio-card,routing =
   "Headphone Jack", "HPLOUT",
   "Headphone Jack", "HPROUT",
   "Line Out",  "LLOUT",
   "Line Out",  "RLOUT",
   "MIC3L",  "Mic Jack",
   "MIC3R",  "Mic Jack",
   "Mic Jack",  "Mic Bias",
   "LINE1L",  "Line In",
   "LINE1R",  "Line In";
  simple-audio-card,format = "dsp_b";
  simple-audio-card,bitclock-master = <&sound0_master>;
  simple-audio-card,frame-master = <&sound0_master>;
  simple-audio-card,bitclock-inversion;

  sound0_master: simple-audio-card,cpu {
   sound-dai = <&mcasp3>;
   system-clock-frequency = <5644800>;
  };

  simple-audio-card,codec {
   sound-dai = <&tlv320aic3106>;
   clocks = <&atl_clkin2_ck>;
  };
 };

 leds {
  compatible = "gpio-leds";
  led0 {
   label = "dra7:usr1";
   gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led1 {
   label = "dra7:usr2";
   gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led2 {
   label = "dra7:usr3";
   gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led3 {
   label = "dra7:usr4";
   gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };
 };

 gpio_keys {
  compatible = "gpio-keys";
  #address-cells = <1>;
  #size-cells = <0>;
  autorepeat;

  USER1 {
   label = "btnUser1";
   linux,code = <BTN_0>;
   gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
  };

  USER2 {
   label = "btnUser2";
   linux,code = <BTN_1>;
   gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
  };
 };
};

&i2c3 {
 status = "okay";
 clock-frequency = <400000>;
};

&mcspi1 {
 status = "okay";
};

&mcspi2 {
 status = "okay";
};

&uart1 {
 status = "okay";
 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
         <&dra7_pmx_core 0x3e0>;
};

&uart2 {
 status = "okay";
};

&uart3 {
 status = "okay";
};

&qspi {
 status = "okay";

 spi-max-frequency = <76800000>;
 flash@0 {
  compatible = "s25fl256s1";
  spi-max-frequency = <76800000>;
  reg = <0>;
  spi-tx-bus-width = <1>;
  spi-rx-bus-width = <4>;
  #address-cells = <1>;
  #size-cells = <1>;

  /* MTD partition table.
   * The ROM checks the first four physical blocks
   * for a valid file to boot and the flash here is
   * 64KiB block size.
   */
  partition@0 {
   label = "QSPI.SPL";
   reg = <0x00000000 0x00010000>;
  };
  partition@1 {
   label = "QSPI.SPL.backup1";
   reg = <0x00010000 0x00010000>;
  };
  partition@2 {
   label = "QSPI.SPL.backup2";
   reg = <0x00020000 0x00010000>;
  };
  partition@3 {
   label = "QSPI.SPL.backup3";
   reg = <0x00030000 0x00010000>;
  };
  partition@4 {
   label = "QSPI.u-boot";
   reg = <0x00040000 0x00100000>;
  };
  partition@5 {
   label = "QSPI.u-boot-spl-os";
   reg = <0x00140000 0x00080000>;
  };
  partition@6 {
   label = "QSPI.u-boot-env";
   reg = <0x001c0000 0x00010000>;
  };
  partition@7 {
   label = "QSPI.u-boot-env.backup1";
   reg = <0x001d0000 0x0010000>;
  };
  partition@8 {
   label = "QSPI.kernel";
   reg = <0x001e0000 0x0800000>;
  };
  partition@9 {
   label = "QSPI.file-system";
   reg = <0x009e0000 0x01620000>;
  };
 };
};

&omap_dwc3_1 {
 extcon = <&extcon_usb1>;
};

&usb1 {
 dr_mode = "otg";
 extcon = <&extcon_usb1>;
};

&omap_dwc3_2 {
 extcon = <&extcon_usb2>;
};

&usb2 {
 dr_mode = "host";
 extcon = <&extcon_usb2>;
};

&atl {
 assigned-clocks = <&abe_dpll_sys_clk_mux>,
     <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
     <&dpll_abe_ck>,
     <&dpll_abe_m2x2_ck>,
     <&atl_clkin2_ck>;
 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;

 status = "okay";

 atl2 {
  bws = <DRA7_ATL_WS_MCASP2_FSX>;
  aws = <DRA7_ATL_WS_MCASP3_FSX>;
 };
};

&mcasp3 {
 #sound-dai-cells = <0>;

 assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 assigned-clock-parents = <&atl_clkin2_ck>;

 status = "okay";

 op-mode = <0>;          /* MCASP_IIS_MODE */
 tdm-slots = <2>;
 /* 4 serializer */
 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
  1 2 0 0
 >;
 tx-num-evt = <32>;
 rx-num-evt = <32>;
};

&pcie1_rc {
 status = "okay";
};

&mmc4 {
 bus-width = <4>;
 cap-power-off-card;
 keep-power-in-suspend;
 non-removable;
 #address-cells = <1>;
 #size-cells = <0>;
 wifi@2 {
  compatible = "ti,wl1835";
  reg = <2>;
  interrupt-parent = <&gpio5>;
  interrupts = <7 IRQ_TYPE_EDGE_RISING>;
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]