/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
*
* PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
*
* Heavily based on proc-arm926.S and proc-xsc3.S
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/cfi_types.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include
"proc-macros.S"
/*
* This is the maximum size of an area which will be flushed. If the
* area is larger than this, then we flush the whole cache.
*/
#define CACHE_DLIMIT 32768
/*
* The cache line size of the L1 D cache.
*/
#define CACHE_DLINESIZE 32
/*
* cpu_mohawk_proc_init()
*/
SYM_TYPED_FUNC_START(cpu_mohawk_proc_init)
ret lr
SYM_FUNC_END(cpu_mohawk_proc_init)
/*
* cpu_mohawk_proc_fin()
*/
SYM_TYPED_FUNC_START(cpu_mohawk_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...iz...........
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
SYM_FUNC_END(cpu_mohawk_proc_fin)
/*
* cpu_mohawk_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*
* (same as arm926)
*/
.
align 5
.pushsection .idmap.text,
"ax"
SYM_TYPED_FUNC_START(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x0007 @ .............cam
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
SYM_FUNC_END(cpu_mohawk_reset)
.popsection
/*
* cpu_mohawk_do_idle()
*
* Called with IRQs disabled
*/
.
align 5
SYM_TYPED_FUNC_START(cpu_mohawk_do_idle)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
ret lr
SYM_FUNC_END(cpu_mohawk_do_idle)
/*
* flush_icache_all()
*
* Unconditionally clean and invalidate the entire icache.
*/
SYM_TYPED_FUNC_START(mohawk_flush_icache_all)
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
ret lr
SYM_FUNC_END(mohawk_flush_icache_all)
/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
* address space.
*/
SYM_FUNC_ALIAS(mohawk_flush_user_cache_all, mohawk_flush_kern_cache_all)
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
SYM_TYPED_FUNC_START(mohawk_flush_kern_cache_all)
mov r2, #VM_EXEC
mov ip, #0
__flush_whole_cache:
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
ret lr
SYM_FUNC_END(mohawk_flush_kern_cache_all)
/*
* flush_user_cache_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address range.
*
* - start - start address (inclusive)
* - end - end address (exclusive)
* - flags - vm_flags describing address space
*
* (same as arm926)
*/
SYM_TYPED_FUNC_START(mohawk_flush_user_cache_range)
mov ip, #0
sub r3, r1, r0 @ calculate total
size
cmp r3, #CACHE_DLIMIT
bgt __flush_whole_cache
1: tst r2, #VM_EXEC
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
ret lr
SYM_FUNC_END(mohawk_flush_user_cache_range)
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
SYM_TYPED_FUNC_START(mohawk_coherent_kern_range)
#ifdef CONFIG_CFI_CLANG
/* Fallthrough if !CFI */
b mohawk_coherent_user_range
#endif
SYM_FUNC_END(mohawk_coherent_kern_range)
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as arm926)
*/
SYM_TYPED_FUNC_START(mohawk_coherent_user_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov r0, #0
ret lr
SYM_FUNC_END(mohawk_coherent_user_range)
/*
* flush_kern_dcache_area(void *addr, size_t size)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - kernel address
* - size - region size
*/
SYM_TYPED_FUNC_START(mohawk_flush_kern_dcache_area)
add r1, r0, r1
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
SYM_FUNC_END(mohawk_flush_kern_dcache_area)
/*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
mohawk_dma_inv_range:
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
/*
* dma_clean_range(start, end)
*
* Clean the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
mohawk_dma_clean_range:
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
SYM_TYPED_FUNC_START(mohawk_dma_flush_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1:
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
SYM_FUNC_END(mohawk_dma_flush_range)
/*
* dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
SYM_TYPED_FUNC_START(mohawk_dma_map_area)
add r1, r1, r0
cmp r2, #DMA_TO_DEVICE
beq mohawk_dma_clean_range
bcs mohawk_dma_inv_range
b mohawk_dma_flush_range
SYM_FUNC_END(mohawk_dma_map_area)
/*
* dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
SYM_TYPED_FUNC_START(mohawk_dma_unmap_area)
ret lr
SYM_FUNC_END(mohawk_dma_unmap_area)
SYM_TYPED_FUNC_START(cpu_mohawk_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
SYM_FUNC_END(cpu_mohawk_dcache_clean_area)
/*
* cpu_mohawk_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.
align 5
SYM_TYPED_FUNC_START(cpu_mohawk_switch_mm)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
orr r0, r0, #0x18 @ cache the page table in L2
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ret lr
SYM_FUNC_END(cpu_mohawk_switch_mm)
/*
* cpu_mohawk_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.
align 5
SYM_TYPED_FUNC_START(cpu_mohawk_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
#endif
SYM_FUNC_END(cpu_mohawk_set_pte_ext)
.globl cpu_mohawk_suspend_size
.equ cpu_mohawk_suspend_size, 4 * 6
#ifdef CONFIG_ARM_CPU_SUSPEND
SYM_TYPED_FUNC_START(cpu_mohawk_do_suspend)
stmfd sp
!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r9} @ store cp regs
ldmia sp
!, {r4 - r9, pc}
SYM_FUNC_END(cpu_mohawk_do_suspend)
SYM_TYPED_FUNC_START(cpu_mohawk_do_resume)
ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
orr r1, r1, #0x18 @ cache the page table in L2
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
SYM_FUNC_END(cpu_mohawk_do_resume)
#endif
.type __mohawk_setup, #function
__mohawk_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
orr r4, r4, #0x18 @ cache the page table in L2
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
mov r0, #0 @ don
't allow CP access
mcr p15, 0, r0, c15, c1, 0 @ write CP access register
adr r5, mohawk_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, r5
orr r0, r0, r6
ret lr
.
size __mohawk_setup, . - __mohawk_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* .011 1001 ..00 0101
*
*/
.type mohawk_crval, #object
mohawk_crval:
crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
.
section ".rodata"
string cpu_arch_name,
"armv5te"
string cpu_elf_name,
"v5"
string cpu_mohawk_name,
"Marvell 88SV331x"
.
align
.
section ".proc.info.init",
"a"
.type __88sv331x_proc_info,#object
__88sv331x_proc_info:
.long 0x56158000 @ Marvell 88SV331x (MOHAWK)
.long 0xfffff000
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __mohawk_setup, __88sv331x_proc_info
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_mohawk_name
.long mohawk_processor_functions
.long v4wbi_tlb_fns
.long v4wb_user_fns
.long mohawk_cache_fns
.
size __88sv331x_proc_info, . - __88sv331x_proc_info
