Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h6-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/clock/sun8i-de2.h>
#include <dt-bindings/clock/sun8i-tcon-top.h>
#include <dt-bindings/reset/sun50i-h6-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
#include <dt-bindings/reset/sun8i-de2.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_cache>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_cache>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_cache>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
#cooling-cells = <2>;
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_cache>;
};
l2_cache: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
de: display-engine {
compatible = "allwinner,sun50i-h6-display-engine";
allwinner,pipelines = <&mixer0>;
status = "disabled";
};
osc24M: osc24M-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
arm,no-tick-in-suspend;
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
bus@1000000 {
compatible = "allwinner,sun50i-h6-de3",
"allwinner,sun50i-a64-de2";
reg = <0x1000000 0x400000>;
allwinner,sram = <&de2_sram 1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1000000 0x400000>;
display_clocks: clock@0 {
compatible = "allwinner,sun50i-h6-de3-clk";
reg = <0x0 0x10000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
"mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};
mixer0: mixer@100000 {
compatible = "allwinner,sun50i-h6-de3-mixer-0";
reg = <0x100000 0x100000>;
clocks = <&display_clocks CLK_BUS_MIXER0>,
<&display_clocks CLK_MIXER0>;
clock-names = "bus",
"mod";
resets = <&display_clocks RST_MIXER0>;
iommus = <&iommu 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mixer0_out: port@1 {
reg = <1>;
mixer0_out_tcon_top_mixer0: endpoint {
remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
};
};
};
};
};
video-codec-g2@1c00000 {
compatible = "allwinner,sun50i-h6-vpu-g2";
reg = <0x01c00000 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_VP9>;
iommus = <&iommu 5>;
};
video-codec@1c0e000 {
compatible = "allwinner,sun50i-h6-video-engine";
reg = <0x01c0e000 0x2000>;
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
<&ccu CLK_MBUS_VE>;
clock-names = "ahb", "mod", "ram";
resets = <&ccu RST_BUS_VE>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
allwinner,sram = <&ve_sram 1>;
iommus = <&iommu 3>;
};
gpu: gpu@1800000 {
compatible = "allwinner,sun50i-h6-mali",
"arm,mali-t720";
reg = <0x01800000 0x4000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
clock-names = "core", "bus";
resets = <&ccu RST_BUS_GPU>;
#cooling-cells = <2>;
status = "disabled";
};
crypto: crypto@1904000 {
compatible = "allwinner,sun50i-h6-crypto";
reg = <0x01904000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
clock-names = "bus", "mod", "ram";
resets = <&ccu RST_BUS_CE>;
};
syscon: syscon@3000000 {
compatible = "allwinner,sun50i-h6-system-control",
"allwinner,sun50i-a64-system-control";
reg = <0x03000000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_c: sram@28000 {
compatible = "mmio-sram";
reg = <0x00028000 0x1e000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00028000 0x1e000>;
de2_sram: sram-section@0 {
compatible = "allwinner,sun50i-h6-sram-c",
"allwinner,sun50i-a64-sram-c";
reg = <0x0000 0x1e000>;
};
};
sram_c1: sram@1a00000 {
compatible = "mmio-sram";
reg = <0x01a00000 0x200000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x01a00000 0x200000>;
ve_sram: sram-section@0 {
compatible = "allwinner,sun50i-h6-sram-c1",
"allwinner,sun4i-a10-sram-c1";
reg = <0x000000 0x200000>;
};
};
};
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
clock-names = "hosc", "losc", "iosc";
#clock-cells = <1>;
#reset-cells = <1>;
};
dma: dma-controller@3002000 {
compatible = "allwinner,sun50i-h6-dma";
reg = <0x03002000 0x1000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
clock-names = "bus", "mbus";
dma-channels = <16>;
dma-requests = <46>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
msgbox: mailbox@3003000 {
compatible = "allwinner,sun50i-h6-msgbox",
"allwinner,sun6i-a31-msgbox";
reg = <0x03003000 0x1000>;
clocks = <&ccu CLK_BUS_MSGBOX>;
resets = <&ccu RST_BUS_MSGBOX>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
};
sid: efuse@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ths_calibration: thermal-sensor-calibration@14 {
reg = <0x14 0x8>;
};
cpu_speed_grade: cpu-speed-grade@1c {
reg = <0x1c 0x4>;
};
};
timer@3009000 {
compatible = "allwinner,sun50i-h6-timer",
"allwinner,sun8i-a23-timer";
reg = <0x03009000 0xa0>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
watchdog: watchdog@30090a0 {
compatible = "allwinner,sun50i-h6-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x030090a0 0x20>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
/* Broken on some H6 boards */
status = "disabled";
};
pwm: pwm@300a000 {
compatible = "allwinner,sun50i-h6-pwm";
reg = <0x0300a000 0x400>;
clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
clock-names = "mod", "bus";
resets = <&ccu RST_BUS_PWM>;
#pwm-cells = <3>;
status = "disabled";
};
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
ext_rgmii_pins: rgmii-pins {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD7", "PD8", "PD9", "PD10",
"PD11", "PD12", "PD13", "PD19", "PD20";
function = "emac";
drive-strength = <40>;
};
hdmi_pins: hdmi-pins {
pins = "PH8", "PH9", "PH10";
function = "hdmi";
};
i2c0_pins: i2c0-pins {
pins = "PD25", "PD26";
function = "i2c0";
};
i2c1_pins: i2c1-pins {
pins = "PH5", "PH6";
function = "i2c1";
};
i2c2_pins: i2c2-pins {
pins = "PD23", "PD24";
function = "i2c2";
};
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
/omit-if-no-ref/
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins: mmc2-pins {
pins = "PC1", "PC4", "PC5", "PC6",
"PC7", "PC8", "PC9", "PC10",
"PC11", "PC12", "PC13", "PC14";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
/omit-if-no-ref/
spi0_pins: spi0-pins {
pins = "PC0", "PC2", "PC3";
function = "spi0";
};
/* pin shared with MMC2-CMD (eMMC) */
/omit-if-no-ref/
spi0_cs_pin: spi0-cs-pin {
pins = "PC5";
function = "spi0";
};
/omit-if-no-ref/
spi1_pins: spi1-pins {
pins = "PH4", "PH5", "PH6";
function = "spi1";
};
/omit-if-no-ref/
spi1_cs_pin: spi1-cs-pin {
pins = "PH3";
function = "spi1";
};
/omit-if-no-ref/
spdif_tx_pin: spdif-tx-pin {
pins = "PH7";
function = "spdif";
};
uart0_ph_pins: uart0-ph-pins {
pins = "PH0", "PH1";
function = "uart0";
};
uart1_pins: uart1-pins {
pins = "PG6", "PG7";
function = "uart1";
};
uart1_rts_cts_pins: uart1-rts-cts-pins {
pins = "PG8", "PG9";
function = "uart1";
};
};
gic: interrupt-controller@3021000 {
compatible = "arm,gic-400";
reg = <0x03021000 0x1000>,
<0x03022000 0x2000>,
<0x03024000 0x2000>,
<0x03026000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
};
iommu: iommu@30f0000 {
compatible = "allwinner,sun50i-h6-iommu";
reg = <0x030f0000 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_IOMMU>;
resets = <&ccu RST_BUS_IOMMU>;
#iommu-cells = <1>;
};
mmc0: mmc@4020000 {
compatible = "allwinner,sun50i-h6-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x04020000 0x1000>;
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@4021000 {
compatible = "allwinner,sun50i-h6-mmc",
"allwinner,sun50i-a64-mmc";
reg = <0x04021000 0x1000>;
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@4022000 {
compatible = "allwinner,sun50i-h6-emmc",
"allwinner,sun50i-a64-emmc";
reg = <0x04022000 0x1000>;
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
clock-names = "ahb", "mmc";
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
max-frequency = <150000000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
uart0: serial@5000000 {
compatible = "snps,dw-apb-uart";
reg = <0x05000000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
uart1: serial@5000400 {
compatible = "snps,dw-apb-uart";
reg = <0x05000400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
uart2: serial@5000800 {
compatible = "snps,dw-apb-uart";
reg = <0x05000800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
uart3: serial@5000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x05000c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
i2c0: i2c@5002000 {
compatible = "allwinner,sun50i-h6-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@5002400 {
compatible = "allwinner,sun50i-h6-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002400 0x400>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@5002800 {
compatible = "allwinner,sun50i-h6-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x05002800 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@5010000 {
compatible = "allwinner,sun50i-h6-spi",
"allwinner,sun8i-h3-spi";
reg = <0x05010000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 22>, <&dma 22>;
dma-names = "rx", "tx";
resets = <&ccu RST_BUS_SPI0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@5011000 {
compatible = "allwinner,sun50i-h6-spi",
"allwinner,sun8i-h3-spi";
reg = <0x05011000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
resets = <&ccu RST_BUS_SPI1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
emac: ethernet@5020000 {
compatible = "allwinner,sun50i-h6-emac",
"allwinner,sun50i-a64-emac";
syscon = <&syscon>;
reg = <0x05020000 0x10000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
resets = <&ccu RST_BUS_EMAC>;
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
i2s1: i2s@5091000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-h6-i2s";
reg = <0x05091000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma 4>, <&dma 4>;
resets = <&ccu RST_BUS_I2S1>;
dma-names = "rx", "tx";
status = "disabled";
};
spdif: spdif@5093000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-h6-spdif";
reg = <0x05093000 0x400>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
resets = <&ccu RST_BUS_SPDIF>;
dmas = <&dma 2>, <&dma 2>;
dma-names = "rx", "tx";
status = "disabled";
};
usb2otg: usb@5100000 {
compatible = "allwinner,sun50i-h6-musb",
"allwinner,sun8i-a33-musb";
reg = <0x05100000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usb2phy 0>;
phy-names = "usb";
extcon = <&usb2phy 0>;
status = "disabled";
};
usb2phy: phy@5100400 {
compatible = "allwinner,sun50i-h6-usb-phy";
reg = <0x05100400 0x24>,
<0x05101800 0x4>,
<0x05311800 0x4>;
reg-names = "phy_ctrl",
"pmu0",
"pmu3";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY3>;
clock-names = "usb0_phy",
"usb3_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY3>;
reset-names = "usb0_reset",
"usb3_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci0: usb@5101000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05101000 0x100>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_BUS_EHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>,
<&ccu RST_BUS_EHCI0>;
phys = <&usb2phy 0>;
phy-names = "usb";
status = "disabled";
};
ohci0: usb@5101400 {
compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
reg = <0x05101400 0x100>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI0>,
<&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_BUS_OHCI0>;
phys = <&usb2phy 0>;
phy-names = "usb";
status = "disabled";
};
dwc3: usb@5200000 {
compatible = "snps,dwc3";
reg = <0x05200000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_XHCI>,
<&ccu CLK_BUS_XHCI>,
<&rtc CLK_OSC32K>;
clock-names = "ref", "bus_early", "suspend";
resets = <&ccu RST_BUS_XHCI>;
/*
* The datasheet of the chip doesn't declare the
* peripheral function, and there's no boards known
* to have a USB Type-B port routed to the port.
* In addition, no one has tested the peripheral
* function yet.
* So set the dr_mode to "host" in the DTSI file.
*/
dr_mode = "host";
phys = <&usb3phy>;
phy-names = "usb3-phy";
status = "disabled";
};
usb3phy: phy@5210000 {
compatible = "allwinner,sun50i-h6-usb3-phy";
reg = <0x5210000 0x10000>;
clocks = <&ccu CLK_USB_PHY1>;
resets = <&ccu RST_USB_PHY1>;
#phy-cells = <0>;
status = "disabled";
};
ehci3: usb@5311000 {
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
reg = <0x05311000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI3>,
<&ccu CLK_BUS_EHCI3>,
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>,
<&ccu RST_BUS_EHCI3>;
phys = <&usb2phy 3>;
phy-names = "usb";
status = "disabled";
};
ohci3: usb@5311400 {
compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
reg = <0x05311400 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_OHCI3>,
<&ccu CLK_USB_OHCI3>;
resets = <&ccu RST_BUS_OHCI3>;
phys = <&usb2phy 3>;
phy-names = "usb";
status = "disabled";
};
hdmi: hdmi@6000000 {
compatible = "allwinner,sun50i-h6-dw-hdmi";
reg = <0x06000000 0x10000>;
reg-io-width = <1>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
<&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
<&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
"hdcp-bus";
resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
reset-names = "ctrl", "hdcp";
phys = <&hdmi_phy>;
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
reg = <0>;
hdmi_in_tcon_top: endpoint {
remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
};
};
hdmi_out: port@1 {
reg = <1>;
};
};
};
hdmi_phy: hdmi-phy@6010000 {
compatible = "allwinner,sun50i-h6-hdmi-phy";
reg = <0x06010000 0x10000>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_HDMI>;
reset-names = "phy";
#phy-cells = <0>;
};
tcon_top: tcon-top@6510000 {
compatible = "allwinner,sun50i-h6-tcon-top";
reg = <0x06510000 0x1000>;
clocks = <&ccu CLK_BUS_TCON_TOP>,
<&ccu CLK_TCON_TV0>;
clock-names = "bus",
"tcon-tv0";
clock-output-names = "tcon-top-tv0";
resets = <&ccu RST_BUS_TCON_TOP>;
#clock-cells = <1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_top_mixer0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon_top_mixer0_in_mixer0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
};
};
tcon_top_mixer0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_top_mixer0_out_tcon_tv: endpoint@2 {
reg = <2>;
remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
};
};
tcon_top_hdmi_in: port@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
tcon_top_hdmi_in_tcon_tv: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon_tv_out_tcon_top>;
};
};
tcon_top_hdmi_out: port@5 {
reg = <5>;
tcon_top_hdmi_out_hdmi: endpoint {
remote-endpoint = <&hdmi_in_tcon_top>;
};
};
};
};
tcon_tv: lcd-controller@6515000 {
compatible = "allwinner,sun50i-h6-tcon-tv",
"allwinner,sun8i-r40-tcon-tv";
reg = <0x06515000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_TCON_TV0>,
<&tcon_top CLK_TCON_TOP_TV0>;
clock-names = "ahb",
"tcon-ch1";
resets = <&ccu RST_BUS_TCON_TV0>;
reset-names = "lcd";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon_tv_in: port@0 {
reg = <0>;
tcon_tv_in_tcon_top_mixer0: endpoint {
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
};
};
tcon_tv_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon_tv_out_tcon_top: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
};
};
};
};
rtc: rtc@7000000 {
compatible = "allwinner,sun50i-h6-rtc";
reg = <0x07000000 0x400>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out", "iosc";
#clock-cells = <1>;
};
r_ccu: clock@7010000 {
compatible = "allwinner,sun50i-h6-r-ccu";
reg = <0x07010000 0x400>;
clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
<&ccu CLK_PLL_PERIPH0>;
clock-names = "hosc", "losc", "iosc", "pll-periph";
#clock-cells = <1>;
#reset-cells = <1>;
};
r_watchdog: watchdog@7020400 {
compatible = "allwinner,sun50i-h6-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x07020400 0x20>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
r_intc: interrupt-controller@7021000 {
compatible = "allwinner,sun50i-h6-r-intc";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x07021000 0x400>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
};
r_pio: pinctrl@7022000 {
compatible = "allwinner,sun50i-h6-r-pinctrl";
reg = <0x07022000 0x400>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
<&rtc CLK_OSC32K>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
r_i2c_pins: r-i2c-pins {
pins = "PL0", "PL1";
function = "s_i2c";
};
r_ir_rx_pin: r-ir-rx-pin {
pins = "PL9";
function = "s_cir_rx";
};
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
};
};
r_ir: ir@7040000 {
compatible = "allwinner,sun50i-h6-ir",
"allwinner,sun6i-a31-ir";
reg = <0x07040000 0x400>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB1_IR>,
<&r_ccu CLK_IR>;
clock-names = "apb", "ir";
resets = <&r_ccu RST_R_APB1_IR>;
pinctrl-names = "default";
pinctrl-0 = <&r_ir_rx_pin>;
status = "disabled";
};
r_i2c: i2c@7081400 {
compatible = "allwinner,sun50i-h6-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x07081400 0x400>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_I2C>;
resets = <&r_ccu RST_R_APB2_I2C>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_rsb: rsb@7083000 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x07083000 0x400>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&r_ccu CLK_R_APB2_RSB>;
clock-frequency = <3000000>;
resets = <&r_ccu RST_R_APB2_RSB>;
pinctrl-names = "default";
pinctrl-0 = <&r_rsb_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
ths: thermal-sensor@5070400 {
compatible = "allwinner,sun50i-h6-ths";
reg = <0x05070400 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_THS>;
clock-names = "bus";
resets = <&ccu RST_BUS_THS>;
nvmem-cells = <&ths_calibration>;
nvmem-cell-names = "calibration";
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 0>;
trips {
cpu_alert: cpu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu-crit {
temperature = <100000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <2000>;
thermal-sensors = <&ths 1>;
trips {
gpu_alert0: gpu-alert-0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
gpu_alert1: gpu-alert-1 {
temperature = <100000>;
hysteresis = <2000>;
type = "passive";
};
gpu_alert2: gpu-alert-2 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
};
gpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
// Forbid the GPU to go over 756MHz
map0 {
trip = <&gpu_alert0>;
cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
};
// Forbid the GPU to go over 624MHz
map1 {
trip = <&gpu_alert1>;
cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
};
// Forbid the GPU to go over 576MHz
map2 {
trip = <&gpu_alert2>;
cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
};
};
};
};
};
