Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/freescale/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 6 kB image not shown  

Quelle  imx8mp-venice-gw75xx.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2023 Gateworks Corporation
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>

/ {
 led-controller {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_gpio_leds>;

  led-0 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
   default-state = "on";
   linux,default-trigger = "heartbeat";
  };

  led-1 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_RED>;
   gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
   default-state = "off";
  };
 };

 pcie0_refclk: pcie0-refclk {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <100000000>;
 };

 pps {
  compatible = "pps-gpio";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_pps>;
  gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
  status = "okay";
 };

 reg_usb2_vbus: regulator-usb2-vbus {
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_usb2_en>;
  compatible = "regulator-fixed";
  regulator-name = "usb2_vbus";
  gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 reg_usdhc2_vmmc: regulator-usdhc2 {
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
  compatible = "regulator-fixed";
  regulator-name = "SD2_3P3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };
};

/* off-board header */
&ecspi2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_spi2>;
 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 status = "okay";
};

&gpio4 {
 gpio-line-names =
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "gpioa", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "";
};

&gpio4 {
 gpio-line-names =
  "", "gpiod", "", "",
  "gpiob", "gpioc", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "pci_usb_sel", "",
  "pci_wdis#", "", "", "";
};

&i2c2 {
 clock-frequency = <400000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c2>;
 status = "okay";

 accelerometer@19 {
  compatible = "st,lis2de12";
  reg = <0x19>;
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_accel>;
  interrupt-parent = <&gpio5>;
  interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
  st,drdy-int-pin = <1>;
 };

 eeprom@52 {
  compatible = "atmel,24c32";
  reg = <0x52>;
  pagesize = <32>;
 };
};

/* off-board header */
&i2c3 {
 clock-frequency = <400000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c3>;
 status = "okay";
};

&pcie_phy {
 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 fsl,clkreq-unsupported;
 clocks = <&pcie0_refclk>;
 clock-names = "ref";
 status = "okay";
};

&pcie {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_pcie0>;
 reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 status = "okay";
};

/* GPS */
&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart1>;
 status = "okay";
};

/* USB1 - Type C front panel SINK port J14 */
&usb3_0 {
 status = "okay";
};

&usb3_phy0 {
 status = "okay";
};

&usb_dwc3_0 {
 dr_mode = "peripheral";
 status = "okay";
};

/* USB2 4-port USB3.0 HUB:
 *  P1 - USBC connector (host only)
 *  P2 - USB2 test connector
 *  P3 - miniPCIe full card
 *  P4 - miniPCIe half card
 */
&usb3_phy1 {
 vbus-supply = <®_usb2_vbus>;
 status = "okay";
};

&usb3_1 {
 fsl,permanently-attached;
 fsl,disable-port-power-control;
 status = "okay";
};

&usb_dwc3_1 {
 dr_mode = "host";
 status = "okay";
};

/* microSD */
&usdhc2 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 vmmc-supply = <®_usdhc2_vmmc>;
 bus-width = <4>;
 status = "okay";
};

&iomuxc {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_hog>;

 pinctrl_hog: hoggrp {
  fsl,pins = <
   MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x40000040 /* GPIOA */
   MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000040 /* GPIOD */
   MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x40000040 /* GPIOB */
   MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x40000040 /* GPIOC */
   MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000106 /* PCI_USBSEL */
   MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCI_WDIS# */
  >;
 };

 pinctrl_accel: accelgrp {
  fsl,pins = <
   MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x159
  >;
 };

 pinctrl_gpio_leds: gpioledgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x6 /* LEDG */
   MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x6 /* LEDR */
  >;
 };

 pinctrl_i2c2: i2c2grp {
  fsl,pins = <
   MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL  0x400001c2
   MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA  0x400001c2
  >;
 };

 pinctrl_i2c3: i2c3grp {
  fsl,pins = <
   MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL  0x400001c2
   MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA  0x400001c2
  >;
 };

 pinctrl_pcie0: pciegrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
  >;
 };

 pinctrl_pps: ppsgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x106
  >;
 };

 pinctrl_reg_usb2_en: regusb2grp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x6 /* USBHUB_RST# (ext p/u) */
  >;
 };

 pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
  >;
 };

 pinctrl_spi2: spi2grp {
  fsl,pins = <
   MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
   MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
   MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
   MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
  >;
 };

 pinctrl_uart1: uart1grp {
  fsl,pins = <
   MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
   MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
  >;
 };

 pinctrl_usdhc2: usdhc2grp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK  0x190
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD  0x1d0
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0  0x1d0
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1  0x1d0
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2  0x1d0
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3  0x1d0
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT  0xc0
  >;
 };

 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK  0x194
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD  0x1d4
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0  0x1d4
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1  0x1d4
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2  0x1d4
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3  0x1d4
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT  0xc0
  >;
 };

 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK  0x196
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD  0x1d6
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0  0x1d6
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1  0x1d6
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2  0x1d6
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3  0x1d6
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT  0xc0
  >;
 };

 pinctrl_usdhc2_gpio: usdhc2gpiogrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12  0x1c4
  >;
 };
};

[ Dauer der Verarbeitung: 0.46 Sekunden  ]