Quelle ipq5018.dtsi
Sprache: unbekannt
|
|
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* IPQ5018 SoC device tree source
*
* Copyright (c) 2023 The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board_clk: xo-board-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-unified;
};
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <200000>;
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <200000>;
};
};
firmware {
scm {
compatible = "qcom,scm-ipq5018", "qcom,scm";
qcom,dload-mode = <&tcsr 0x6100>;
qcom,sdi-enabled;
};
};
memory@40000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0x0 0x40000000 0x0 0x0>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bootloader@4a800000 {
reg = <0x0 0x4a800000 0x0 0x200000>;
no-map;
};
sbl@4aa00000 {
reg = <0x0 0x4aa00000 0x0 0x100000>;
no-map;
};
smem@4ab00000 {
compatible = "qcom,smem";
reg = <0x0 0x4ab00000 0x0 0x100000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
};
tz_region: tz@4ac00000 {
reg = <0x0 0x4ac00000 0x0 0x200000>;
no-map;
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
usbphy0: phy@5b000 {
compatible = "qcom,ipq5018-usb-hsphy";
reg = <0x0005b000 0x120>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
#phy-cells = <0>;
status = "disabled";
};
pcie1_phy: phy@7e000 {
compatible = "qcom,ipq5018-uniphy-pcie-phy";
reg = <0x0007e000 0x800>;
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
#clock-cells = <0>;
#phy-cells = <0>;
num-lanes = <1>;
status = "disabled";
};
pcie0_phy: phy@86000 {
compatible = "qcom,ipq5018-uniphy-pcie-phy";
reg = <0x00086000 0x1000>;
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
#clock-cells = <0>;
#phy-cells = <0>;
num-lanes = <2>;
status = "disabled";
};
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5018-tlmm";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 47>;
interrupt-controller;
#interrupt-cells = <2>;
uart1_pins: uart1-state {
pins = "gpio31", "gpio32", "gpio33", "gpio34";
function = "blsp1_uart1";
drive-strength = <8>;
bias-pull-down;
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-ipq5018";
reg = <0x01800000 0x80000>;
clocks = <&xo_board_clk>,
<&sleep_clk>,
<&pcie0_phy>,
<&pcie1_phy>,
<0>,
<0>,
<0>,
<0>,
<0>;
#clock-cells = <1>;
#reset-cells = <1>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-ipq5018", "syscon";
reg = <0x01937000 0x21000>;
};
sdhc_1: mmc@7804000 {
compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
reg = <0x7804000 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board_clk>;
clock-names = "iface", "core", "xo";
non-removable;
status = "disabled";
};
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x1d000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
dma-names = "tx", "rx";
status = "disabled";
};
usb: usb@8af8800 {
compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
reg = <0x08af8800 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq";
clocks = <&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "core",
"iface",
"sleep",
"mock_utmi";
resets = <&gcc GCC_USB0_BCR>;
qcom,select-utmi-as-pipe-clk;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
usb_dwc: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x08a00000 0xe000>;
clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "ref";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phy-names = "usb2-phy";
phys = <&usbphy0>;
tx-fifo-resize;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
<0x0b002000 0x2000>, /* GICC */
<0x0b001000 0x1000>, /* GICH */
<0x0b004000 0x2000>; /* GICV */
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0b00a000 0x1ffa>;
v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
reg = <0x00000000 0xff8>;
msi-controller;
};
v2m1: v2m@1000 {
compatible = "arm,gic-v2m-frame";
reg = <0x00001000 0xff8>;
msi-controller;
};
};
watchdog: watchdog@b017000 {
compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt";
reg = <0x0b017000 0x40>;
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
clocks = <&sleep_clk>;
};
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq5018-apcs-apps-global",
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
a53pll: clock@b116000 {
compatible = "qcom,ipq5018-a53pll";
reg = <0x0b116000 0x40>;
#clock-cells = <0>;
clocks = <&xo_board_clk>;
clock-names = "xo";
};
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@b120000 {
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <0>;
};
frame@b123000 {
reg = <0xb123000 0x1000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <1>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
reg = <0x0b125000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <3>;
status = "disabled";
};
frame@b126000 {
reg = <0x0b126000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <4>;
status = "disabled";
};
frame@b127000 {
reg = <0x0b127000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <5>;
status = "disabled";
};
frame@b128000 {
reg = <0x0b128000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <6>;
status = "disabled";
};
};
pcie1: pcie@80000000 {
compatible = "qcom,pcie-ipq5018";
reg = <0x80000000 0xf1d>,
<0x80000f20 0xa8>,
<0x80001000 0x1000>,
<0x00078000 0x3000>,
<0x80100000 0x1000>,
<0x0007b000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
/* The controller supports Gen3, but the connected PHY is Gen2-capable */
max-link-speed = <2>;
phys = <&pcie1_phy>;
phy-names ="pciephy";
ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
<0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
msi-map = <0x0 &v2m0 0x0 0xff8>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
<&gcc GCC_PCIE1_AXI_M_CLK>,
<&gcc GCC_PCIE1_AXI_S_CLK>,
<&gcc GCC_PCIE1_AHB_CLK>,
<&gcc GCC_PCIE1_AUX_CLK>,
<&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
"ahb",
"aux",
"axi_bridge";
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
<&gcc GCC_PCIE1_SLEEP_ARES>,
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_MASTER_ARES>,
<&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE1_AHB_ARES>,
<&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
"axi_m_sticky",
"axi_s_sticky";
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie0: pcie@a0000000 {
compatible = "qcom,pcie-ipq5018";
reg = <0xa0000000 0xf1d>,
<0xa0000f20 0xa8>,
<0xa0001000 0x1000>,
<0x00080000 0x3000>,
<0xa0100000 0x1000>,
<0x00083000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
/* The controller supports Gen3, but the connected PHY is Gen2-capable */
max-link-speed = <2>;
phys = <&pcie0_phy>;
phy-names ="pciephy";
ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
<0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
msi-map = <0x0 &v2m0 0x0 0xff8>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>,
<&gcc GCC_PCIE0_AUX_CLK>,
<&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>;
clock-names = "iface",
"axi_m",
"axi_s",
"ahb",
"aux",
"axi_bridge";
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_SLEEP_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>,
<&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
reset-names = "pipe",
"sleep",
"sticky",
"axi_m",
"axi_s",
"ahb",
"axi_m_sticky",
"axi_s_sticky";
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
[ Dauer der Verarbeitung: 0.12 Sekunden
(vorverarbeitet)
]
|
2026-04-06
|
