Quelle ipq5332.dtsi
Sprache: unbekannt
|
|
// SPDX-License-Identifier: BSD-3-Clause
/*
* IPQ5332 device tree source
*
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
#include <dt-bindings/interconnect/qcom,ipq5332.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board: xo-board-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
operating-points-v2 = <&cpu_opp_table>;
};
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
firmware {
scm {
compatible = "qcom,scm-ipq5332", "qcom,scm";
qcom,dload-mode = <&tcsr 0x6100>;
};
};
memory@40000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0x0 0x40000000 0x0 0x0>;
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2-kryo-cpu";
opp-shared;
nvmem-cells = <&cpu_speed_bin>;
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-supported-hw = <0x3>;
clock-latency-ns = <200000>;
};
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bootloader@4a100000 {
reg = <0x0 0x4a100000 0x0 0x400000>;
no-map;
};
sbl@4a500000 {
reg = <0x0 0x4a500000 0x0 0x100000>;
no-map;
};
tz_mem: tz@4a600000 {
reg = <0x0 0x4a600000 0x0 0x200000>;
no-map;
};
smem@4a800000 {
compatible = "qcom,smem";
reg = <0x0 0x4a800000 0x0 0x100000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
};
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
usbphy0: phy@7b000 {
compatible = "qcom,ipq5332-usb-hsphy";
reg = <0x0007b000 0x12c>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
#phy-cells = <0>;
status = "disabled";
};
qfprom: efuse@a4000 {
compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x721>;
#address-cells = <1>;
#size-cells = <1>;
cpu_speed_bin: cpu-speed-bin@1d {
reg = <0x1d 0x2>;
bits = <7 2>;
};
tsens_sens11_off: s11@3a5 {
reg = <0x3a5 0x1>;
bits = <4 4>;
};
tsens_sens12_off: s12@3a6 {
reg = <0x3a6 0x1>;
bits = <0 4>;
};
tsens_sens13_off: s13@3a6 {
reg = <0x3a6 0x1>;
bits = <4 4>;
};
tsens_sens14_off: s14@3ad {
reg = <0x3ad 0x2>;
bits = <7 4>;
};
tsens_sens15_off: s15@3ae {
reg = <0x3ae 0x1>;
bits = <3 4>;
};
tsens_mode: mode@3e1 {
reg = <0x3e1 0x1>;
bits = <0 3>;
};
tsens_base0: base0@3e1 {
reg = <0x3e1 0x2>;
bits = <3 10>;
};
tsens_base1: base1@3e2 {
reg = <0x3e2 0x2>;
bits = <5 10>;
};
};
rng: rng@e3000 {
compatible = "qcom,ipq5332-trng", "qcom,trng";
reg = <0x000e3000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
tsens: thermal-sensor@4a9000 {
compatible = "qcom,ipq5332-tsens";
reg = <0x004a9000 0x1000>,
<0x004a8000 0x1000>;
interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "combined";
nvmem-cells = <&tsens_mode>,
<&tsens_base0>,
<&tsens_base1>,
<&tsens_sens11_off>,
<&tsens_sens12_off>,
<&tsens_sens13_off>,
<&tsens_sens14_off>,
<&tsens_sens15_off>;
nvmem-cell-names = "mode",
"base0",
"base1",
"tsens_sens11_off",
"tsens_sens12_off",
"tsens_sens13_off",
"tsens_sens14_off",
"tsens_sens15_off";
#qcom,sensors = <5>;
#thermal-sensor-cells = <1>;
};
pcie0_phy: phy@4b0000 {
compatible = "qcom,ipq5332-uniphy-pcie-phy";
reg = <0x004b0000 0x800>;
clocks = <&gcc GCC_PCIE3X1_0_PIPE_CLK>,
<&gcc GCC_PCIE3X1_PHY_AHB_CLK>;
resets = <&gcc GCC_PCIE3X1_0_PHY_BCR>,
<&gcc GCC_PCIE3X1_PHY_AHB_CLK_ARES>,
<&gcc GCC_PCIE3X1_0_PHY_PHY_BCR>;
#clock-cells = <0>;
#phy-cells = <0>;
num-lanes = <1>;
status = "disabled";
};
pcie1_phy: phy@4b1000 {
compatible = "qcom,ipq5332-uniphy-pcie-phy";
reg = <0x004b1000 0x1000>;
clocks = <&gcc GCC_PCIE3X2_PIPE_CLK>,
<&gcc GCC_PCIE3X2_PHY_AHB_CLK>;
resets = <&gcc GCC_PCIE3X2_PHY_BCR>,
<&gcc GCC_PCIE3X2_PHY_AHB_CLK_ARES>,
<&gcc GCC_PCIE3X2PHY_PHY_BCR>;
#clock-cells = <0>;
#phy-cells = <0>;
num-lanes = <2>;
status = "disabled";
};
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5332-tlmm";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 53>;
interrupt-controller;
#interrupt-cells = <2>;
serial_0_pins: serial0-state {
pins = "gpio18", "gpio19";
function = "blsp0_uart0";
drive-strength = <8>;
bias-pull-up;
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,ipq5332-gcc";
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
#interconnect-cells = <1>;
clocks = <&xo_board>,
<&sleep_clk>,
<&pcie1_phy>,
<&pcie0_phy>,
<0>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-ipq5332", "syscon";
reg = <0x01937000 0x21000>;
};
sdhc: mmc@7804000 {
compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
status = "disabled";
};
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x1d000>;
interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
blsp1_uart0: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart1: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b0000 0x200>;
interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 2>, <&blsp_dma 3>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi0: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_i2c1: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 6>, <&blsp_dma 7>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi2: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 8>, <&blsp_dma 9>;
dma-names = "tx", "rx";
status = "disabled";
};
usb: usb@8af8800 {
compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
reg = <0x08af8800 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"dp_hs_phy_irq",
"dm_hs_phy_irq";
clocks = <&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "core",
"sleep",
"mock_utmi";
resets = <&gcc GCC_USB_BCR>;
qcom,select-utmi-as-pipe-clk;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interconnects = <&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>,
<&gcc MASTER_SNOC_USB &gcc SLAVE_SNOC_USB>;
interconnect-names = "usb-ddr", "apps-usb";
status = "disabled";
usb_dwc: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x08a00000 0xe000>;
clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "ref";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
phy-names = "usb2-phy";
phys = <&usbphy0>;
tx-fifo-resize;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
<0x0b002000 0x1000>, /* GICC */
<0x0b001000 0x1000>, /* GICH */
<0x0b004000 0x1000>; /* GICV */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0b00c000 0x3000>;
v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
reg = <0x00000000 0xffd>;
msi-controller;
};
v2m1: v2m@1000 {
compatible = "arm,gic-v2m-frame";
reg = <0x00001000 0xffd>;
msi-controller;
};
v2m2: v2m@2000 {
compatible = "arm,gic-v2m-frame";
reg = <0x00002000 0xffd>;
msi-controller;
};
};
watchdog: watchdog@b017000 {
compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt";
reg = <0x0b017000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
clocks = <&sleep_clk>;
timeout-sec = <30>;
};
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq5332-apcs-apps-global",
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
a53pll: clock@b116000 {
compatible = "qcom,ipq5332-a53pll";
reg = <0x0b116000 0x40>;
#clock-cells = <0>;
clocks = <&xo_board>;
clock-names = "xo";
};
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@b120000 {
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <0>;
};
frame@b123000 {
reg = <0x0b123000 0x1000>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <1>;
status = "disabled";
};
frame@b124000 {
reg = <0x0b124000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <2>;
status = "disabled";
};
frame@b125000 {
reg = <0x0b125000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <3>;
status = "disabled";
};
frame@b126000 {
reg = <0x0b126000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <4>;
status = "disabled";
};
frame@b127000 {
reg = <0x0b127000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <5>;
status = "disabled";
};
frame@b128000 {
reg = <0x0b128000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
frame-number = <6>;
status = "disabled";
};
};
pcie1: pcie@18000000 {
compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
reg = <0x18000000 0xf1c>,
<0x18000f20 0xa8>,
<0x18001000 0x1000>,
<0x00088000 0x3000>,
<0x18100000 0x1000>,
<0x0008b000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <1>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x00100000>,
<0x02000000 0x0 0x18300000 0x18300000 0x0 0x07d00000>;
msi-map = <0x0 &v2m0 0x0 0xffd>;
interrupts = <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
<&gcc GCC_PCIE3X2_AXI_S_CLK>,
<&gcc GCC_PCIE3X2_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE3X2_RCHG_CLK>,
<&gcc GCC_PCIE3X2_AHB_CLK>,
<&gcc GCC_PCIE3X2_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
assigned-clocks = <&gcc GCC_PCIE3X2_AUX_CLK>;
assigned-clock-rates = <2000000>;
resets = <&gcc GCC_PCIE3X2_PIPE_ARES>,
<&gcc GCC_PCIE3X2_CORE_STICKY_ARES>,
<&gcc GCC_PCIE3X2_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE3X2_AXI_S_CLK_ARES>,
<&gcc GCC_PCIE3X2_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE3X2_AXI_M_CLK_ARES>,
<&gcc GCC_PCIE3X2_AUX_CLK_ARES>,
<&gcc GCC_PCIE3X2_AHB_CLK_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie1_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_SNOC_PCIE3_2_M &gcc SLAVE_SNOC_PCIE3_2_M>,
<&gcc MASTER_ANOC_PCIE3_2_S &gcc SLAVE_ANOC_PCIE3_2_S>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie0: pcie@20000000 {
compatible = "qcom,pcie-ipq5332", "qcom,pcie-ipq9574";
reg = <0x20000000 0xf1c>,
<0x20000f20 0xa8>,
<0x20001000 0x1000>,
<0x00080000 0x3000>,
<0x20100000 0x1000>,
<0x00083000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <0>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x00100000>,
<0x02000000 0x0 0x20300000 0x20300000 0x0 0x0fd00000>;
msi-map = <0x0 &v2m0 0x0 0xffd>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
<&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
<&gcc GCC_PCIE3X1_0_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE3X1_0_RCHG_CLK>,
<&gcc GCC_PCIE3X1_0_AHB_CLK>,
<&gcc GCC_PCIE3X1_0_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
assigned-clocks = <&gcc GCC_PCIE3X1_0_AUX_CLK>;
assigned-clock-rates = <2000000>;
resets = <&gcc GCC_PCIE3X1_0_PIPE_ARES>,
<&gcc GCC_PCIE3X1_0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE3X1_0_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE3X1_0_AXI_S_CLK_ARES>,
<&gcc GCC_PCIE3X1_0_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE3X1_0_AXI_M_CLK_ARES>,
<&gcc GCC_PCIE3X1_0_AUX_CLK_ARES>,
<&gcc GCC_PCIE3X1_0_AHB_CLK_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie0_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_SNOC_PCIE3_1_M &gcc SLAVE_SNOC_PCIE3_1_M>,
<&gcc MASTER_ANOC_PCIE3_1_S &gcc SLAVE_ANOC_PCIE3_1_S>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
};
thermal-zones {
rfa-0-thermal {
thermal-sensors = <&tsens 11>;
trips {
rfa-0-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
rfa-1-thermal {
thermal-sensors = <&tsens 12>;
trips {
rfa-1-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
misc-thermal {
thermal-sensors = <&tsens 13>;
trips {
misc-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu-top-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&tsens 14>;
trips {
cpu-top-critical {
temperature = <115000>;
hysteresis = <1000>;
type = "critical";
};
cpu-passive {
temperature = <105000>;
hysteresis = <1000>;
type = "passive";
};
};
};
top-glue-thermal {
thermal-sensors = <&tsens 15>;
trips {
top-glue-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};
[ Dauer der Verarbeitung: 0.4 Sekunden
(vorverarbeitet)
]
|
2026-04-06
|
