// SPDX-License-Identifier: GPL-2.0-only
#include "msm8916-modem-qdsp6.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
/ {
aliases {
mmc0 = &sdhc_1; /* eMMC */
mmc1 = &sdhc_2; /* SD card */
serial0 = &blsp_uart2;
};
chosen {
stdout-path = "serial0";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pm8916_pwm 0 100000>;
brightness-levels = <0 255>;
num-interpolated-steps = <255>;
default-brightness-level = <128>;
};
flash-led-controller {
compatible = "sgmicro,sgm3140";
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&camera_front_flash_default>;
pinctrl-names = "default";
flash_led: led {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_keys_default>;
pinctrl-names = "default";
label = "GPIO Buttons";
button-volume-up {
label = "Volume Up";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&gpio_leds_default>;
pinctrl-names = "default";
led-0 {
gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
function = LED_FUNCTION_CHARGING;
color = <LED_COLOR_ID_RED>;
default-state = "off";
retain-state-suspended;
};
led-1 {
gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
retain-state-suspended;
};
};
usb_id: usb-id {
compatible = "linux,extcon-usb-gpio";
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&usb_id_default>;
pinctrl-names = "default";
};
};
&blsp_i2c2 {
status = "okay";
accelerometer@68 {
compatible = "invensense,icm20608";
reg = <0x68>;
interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&accelerometer_default>;
pinctrl-names = "default";
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l6>;
mount-matrix = "-1", "0", "0",
"0", "1", "0",
"0", "0", "1";
};
};
&blsp_i2c5 {
status = "okay";
touchscreen: touchscreen@38 {
compatible = "edt,edt-ft5306";
reg = <0x38>;
interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&touchscreen_default>;
pinctrl-names = "default";
vcc-supply = <&pm8916_l17>;
iovcc-supply = <&pm8916_l6>;
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
};
};
&blsp_uart2 {
pinctrl-0 = <&blsp_uart2_console_default>;
pinctrl-1 = <&blsp_uart2_console_sleep>;
pinctrl-names = "default", "sleep";
status = "okay";
};
&mpss_mem {
reg = <0x0 0x86800000 0x0 0x5500000>;
};
&pm8916_pwm {
pinctrl-0 = <&pwm_out>;
pinctrl-names = "default";
status = "okay";
};
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
};
&pm8916_vib {
status = "okay";
};
&sdhc_1 {
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_default>;
pinctrl-1 = <&sdc2_sleep>;
pinctrl-names = "default", "sleep";
non-removable;
status = "okay";
};
&usb {
extcon = <&usb_id>, <&usb_id>;
status = "okay";
};
&usb_hs_phy {
extcon = <&usb_id>;
};
&wcnss {
status = "okay";
};
&wcnss_iris {
compatible = "qcom,wcn3620";
};
&wcnss_mem {
status = "okay";
};
&tlmm {
accelerometer_default: accelerometer-default-state {
pins = "gpio115";
function = "gpio";
drive-strength = <6>;
bias-pull-up;
};
camera_front_flash_default: camera-front-flash-default-state {
pins = "gpio31", "gpio32";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
gpio_leds_default: gpio-leds-default-state {
pins = "gpio36", "gpio69";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
touchscreen_default: touchscreen-default-state {
reset-pins {
pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
touchscreen-pins {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
usb_id_default: usb-id-default-state {
pins = "gpio110";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
&pm8916_mpps {
pwm_out: mpp4-state {
pins = "mpp4";
function = "digital";
power-source = <PM8916_MPP_VPH>;
output-low;
qcom,dtest = <1>;
};
};
