// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
* Copyright (c) 2024, Casey Connolly <casey.connolly@linaro.org>
*/
/dts-v1/;
#define PM7250B_SID 8
#define PM7250B_SID1 9
#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7250b.dtsi"
#include "pm7325.dtsi"
#include "pm8350c.dtsi" /* PM7350C */
#include "pmk8350.dtsi" /* PMK7325 */
/delete-node/ &rmtfs_mem;
/ {
model = "SHIFT SHIFTphone 8";
compatible = "shift,otter", "qcom,qcm6490";
chassis-type = "handset";
aliases {
serial0 = &uart5;
serial1 = &uart7;
};
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
stdout-path = "serial0:115200n8";
framebuffer0: framebuffer@a000000 {
compatible = "simple-framebuffer";
reg = <0x0 0xe1000000 0x0 (2400 * 1080 * 4)>;
width = <1080>;
height = <2400>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&volume_down_default>;
pinctrl-names = "default";
key-volume-up {
label = "Volume up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
};
pmic-glink {
compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_sbu: endpoint {
remote-endpoint = <&fsa4480_sbu_mux>;
};
};
};
};
};
reserved-memory {
cont_splash_mem: cont-splash@e1000000 {
reg = <0x0 0xe1000000 0x0 0x2300000>;
no-map;
};
cdsp_mem: cdsp@88f00000 {
reg = <0x0 0x88f00000 0x0 0x1e00000>;
no-map;
};
rmtfs_mem: rmtfs@f8500000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0xf8500000 0x0 0x600000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
};
};
thermal-zones {
camera-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
chg-skin-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm7250b_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm7250b_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
rear-cam-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 4>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
sdm-skin-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pmk8350_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm7325-rpmh-regulators";
qcom,pmic-id = "b";
vreg_s1b: smps1 {
regulator-name = "vreg_s1b";
regulator-min-microvolt = <1840000>;
regulator-max-microvolt = <2040000>;
};
vreg_s7b: smps7 {
regulator-name = "vreg_s7b";
regulator-min-microvolt = <535000>;
regulator-max-microvolt = <1120000>;
};
vreg_s8b: smps8 {
regulator-name = "vreg_s8b";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
};
vreg_l1b: ldo1 {
regulator-name = "vreg_l1b";
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <925000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b: ldo2 {
regulator-name = "vreg_l2b";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3b: ldo3 {
regulator-name = "vreg_l3b";
regulator-min-microvolt = <312000>;
regulator-max-microvolt = <910000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b: ldo6 {
regulator-name = "vreg_l6b";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b: ldo7 {
regulator-name = "vreg_l7b";
/* Constrained for UFS VCC, at least until UFS driver scales voltage */
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b: ldo8 {
regulator-name = "vreg_l8b";
regulator-min-microvolt = <870000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b: ldo9 {
regulator-name = "vreg_l9b";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b: ldo11 {
regulator-name = "vreg_l11b";
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b: ldo12 {
regulator-name = "vreg_l12b";
regulator-min-microvolt = <751000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b: ldo13 {
regulator-name = "vreg_l13b";
regulator-min-microvolt = <530000>;
regulator-max-microvolt = <824000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b: ldo14 {
regulator-name = "vreg_l14b";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b: ldo15 {
regulator-name = "vreg_l15b";
regulator-min-microvolt = <765000>;
regulator-max-microvolt = <1020000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b: ldo16 {
regulator-name = "vreg_l16b";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b: ldo17 {
regulator-name = "vreg_l17b";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18b: ldo18 {
regulator-name = "vreg_l18b";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19b: ldo19 {
regulator-name = "vreg_l19b";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8350c-rpmh-regulators";
qcom,pmic-id = "c";
vreg_s1c: smps1 {
regulator-name = "vreg_s1c";
regulator-min-microvolt = <2190000>;
regulator-max-microvolt = <2210000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s9c: smps9 {
regulator-name = "vreg_s9c";
regulator-min-microvolt = <1010000>;
regulator-max-microvolt = <1170000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c: ldo1 {
regulator-name = "vreg_l1c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1980000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c: ldo2 {
regulator-name = "vreg_l2c";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1950000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c: ldo3 {
regulator-name = "vreg_l3c";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c: ldo4 {
regulator-name = "vreg_l4c";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5c: ldo5 {
regulator-name = "vreg_l5c";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6c: ldo6 {
regulator-name = "vreg_l6c";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c: ldo7 {
regulator-name = "vreg_l7c";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8c: ldo8 {
regulator-name = "vreg_l8c";
regulator-min-microvolt = <1620000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c: ldo9 {
regulator-name = "vreg_l9c";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c: ldo10 {
regulator-name = "vreg_l10c";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c: ldo11 {
regulator-name = "vreg_l11c";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12c: ldo12 {
regulator-name = "vreg_l12c";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13c: ldo13 {
regulator-name = "vreg_l13c";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3544000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob: bob {
regulator-name = "vreg_bob";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
};
};
&gcc {
protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
<GCC_EDP_CLKREF_EN>,
<GCC_MSS_CFG_AHB_CLK>,
<GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
<GCC_MSS_OFFLINE_AXI_CLK>,
<GCC_MSS_Q6SS_BOOT_CLK_SRC>,
<GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<GCC_MSS_SNOC_AXI_CLK>,
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
<GCC_SEC_CTRL_CLK_SRC>,
<GCC_WPSS_AHB_BDG_MST_CLK>,
<GCC_WPSS_AHB_CLK>,
<GCC_WPSS_RSCP_CLK>;
};
&gpi_dma0 {
status = "okay";
};
&gpi_dma1 {
status = "okay";
};
&gpu {
status = "okay";
};
&gpu_zap_shader {
firmware-name = "qcom/qcm6490/SHIFT/otter/a660_zap.mbn";
};
&i2c1 {
status = "okay";
/* PM8008 PMIC @ 8 and 9 */
/* rtc6226 FM receiver @ 64 */
typec-mux@42 {
compatible = "fcs,fsa4480";
reg = <0x42>;
vcc-supply = <&vreg_bob>;
mode-switch;
orientation-switch;
port {
fsa4480_sbu_mux: endpoint {
remote-endpoint = <&pmic_glink_sbu>;
};
};
};
};
&i2c4 {
status = "okay";
/* tas2563 audio codec @ 4d */
};
&i2c9 {
status = "okay";
/* TMS(?) NFC @ 28 */
/* Ti drv2624 haptics @ 5a */
};
&i2c13 {
status = "okay";
/* focaltech FT3658U @ 38 */
};
&ipa {
qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/qcm6490/SHIFT/otter/ipa_fws.mbn";
status = "okay";
};
&pm7250b_adc {
channel@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "charger_skin_therm";
};
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "conn_therm";
};
};
&pm7250b_adc_tm {
status = "okay";
charger-skin-therm@0 {
reg = <0>;
io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
conn-therm@1 {
reg = <1>;
io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm7325_gpios {
volume_down_default: volume-down-default-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pmk8350_adc_tm {
status = "okay";
xo-therm@0 {
reg = <0>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet-therm@1 {
reg = <1>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
cam-flash-therm@2 {
reg = <2>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
sdm-skin-therm@3 {
reg = <3>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
wide-rfc-therm@4 {
reg = <4>;
io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pmk8350_rtc {
status = "okay";
};
&pmk8350_vadc {
status = "okay";
channel@44 {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pmk8350_xo_therm";
};
channel@144 {
reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_quiet_therm";
};
channel@145 {
reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_cam_flash_therm";
};
channel@146 {
reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_sdm_skin_therm";
};
channel@147 {
reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pm7325_wide_rfc_therm";
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qup_spi13_cs {
drive-strength = <6>;
bias-disable;
};
&qup_spi13_data_clk {
drive-strength = <6>;
bias-disable;
};
&qup_uart5_rx {
drive-strength = <2>;
bias-disable;
};
&qup_uart5_tx {
drive-strength = <2>;
bias-disable;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/qcm6490/SHIFT/otter/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/qcm6490/SHIFT/otter/cdsp.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/qcm6490/SHIFT/otter/modem.mbn";
status = "okay";
};
&remoteproc_wpss {
firmware-name = "qcom/qcm6490/SHIFT/otter/wpss.mbn";
status = "okay";
};
&sdc2_clk {
drive-strength = <16>;
bias-disable;
};
&sdc2_cmd {
drive-strength = <10>;
bias-pull-up;
};
&sdc2_data {
drive-strength = <10>;
bias-pull-up;
};
&sdhc_2 {
vmmc-supply = <&vreg_l9c>;
vqmmc-supply = <&vreg_l6c>;
pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
status = "okay";
};
&tlmm {
/*
* 48-52: protected by XPU, not sure why.
*/
gpio-reserved-ranges = <48 4>;
bluetooth_enable_default: bluetooth-enable-default-state {
pins = "gpio85";
function = "gpio";
output-low;
bias-disable;
};
qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
* Configure pull-down on RTS. As RTS is active low
* signal, pull it low to indicate the BT SoC that it
* can wakeup the system anytime from suspend state by
* pulling RX low (by sending wakeup bytes).
*/
bias-pull-down;
};
qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
* Configure pull-up on TX when it isn't actively driven
* to prevent BT SoC from receiving garbage during sleep.
*/
bias-pull-up;
};
qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module
* is floating which may cause spurious wakeups.
*/
bias-pull-up;
};
sw_ctrl_default: sw-ctrl-default-state {
pins = "gpio86";
function = "gpio";
bias-pull-down;
};
};
&uart5 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&uart7 {
/delete-property/interrupts;
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
pinctrl-names = "default", "sleep";
status = "okay";
bluetooth: bluetooth {
compatible = "qcom,wcn6750-bt";
pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
pinctrl-names = "default";
enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
vddio-supply = <&vreg_l19b>;
vddaon-supply = <&vreg_s7b>;
vddbtcxmx-supply = <&vreg_s7b>;
vddrfacmn-supply = <&vreg_s7b>;
vddrfa0p8-supply = <&vreg_s7b>;
vddrfa1p7-supply = <&vreg_s1b>;
vddrfa1p2-supply = <&vreg_s8b>;
vddrfa2p2-supply = <&vreg_s1c>;
vddasd-supply = <&vreg_l11c>;
max-speed = <3200000>;
};
};
&ufs_mem_hc {
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l7b>;
vcc-max-microamp = <800000>;
/*
* Technically l9b enables an eLDO (supplied by s1b) which then powers
* VCCQ2 of the UFS.
*/
vccq-supply = <&vreg_l9b>;
vccq-max-microamp = <900000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l10c>;
vdda-pll-supply = <&vreg_l6b>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_dp_qmpphy_out {
remote-endpoint = <&pmic_glink_ss_in>;
};
&usb_1_hsphy {
vdda-pll-supply = <&vreg_l10c>;
vdda18-supply = <&vreg_l1c>;
vdda33-supply = <&vreg_l2b>;
qcom,hs-crossover-voltage-microvolt = <28000>;
qcom,hs-output-impedance-micro-ohms = <2600000>;
qcom,hs-rise-fall-time-bp = <5430>;
qcom,hs-disconnect-bp = <1743>;
qcom,hs-amplitude-bp = <2430>;
qcom,pre-emphasis-amplitude-bp = <20000>;
qcom,pre-emphasis-duration-bp = <20000>;
qcom,squelch-detector-bp = <(-2090)>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b>;
vdda-pll-supply = <&vreg_l1b>;
status = "okay";
};
&wifi {
qcom,calibration-variant = "SHIFTphone_8";
status = "okay";
};
