Quelle  sdm845-samsung-starqltechn.dts   Sprache: unbekannt

// SPDX-License-Identifier: GPL-2.0
/*
 * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
 *
 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
 */

/dts-v1/;

#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include <dt-bindings/sound/qcom,wcd934x.h>

#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "sdm845-wcd9340.dtsi"

/delete-node/ &rmtfs_mem;
/delete-node/ &spss_mem;
/delete-node/ &adsp_mem;
/delete-node/ &slpi_mem;

/ {
 chassis-type = "handset";
 model = "Samsung Galaxy S9 SM-G9600";
 compatible = "samsung,starqltechn", "qcom,sdm845";

 battery: battery {
  compatible = "simple-battery";
  constant-charge-current-max-microamp = <2150000>;
  charge-full-design-microamp-hours = <3000000>;

  over-voltage-threshold-microvolt = <4500000>;
  voltage-min-design-microvolt = <3400000>;
  voltage-max-design-microvolt = <4350000>;
 };

 chosen {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;
  framebuffer: framebuffer@9d400000 {
   compatible = "simple-framebuffer";
   reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
   width = <1440>;
   height = <2960>;
   stride = <(1440 * 4)>;
   format = "a8r8g8b8";
   vci-supply = <&s2dos05_ldo4>;
   vddr-supply = <&s2dos05_buck>;
   vdd3-supply = <&s2dos05_ldo1>;
  };
 };

 vib_regulator: gpio-regulator {
  compatible = "regulator-fixed";

  regulator-name = "haptic";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
  enable-active-high;

  regulator-boot-on;
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;
 };

 /*
  * Apparently RPMh does not provide support for PM8998 S4 because it
  * is always-on; model it as a fixed regulator.
  */
 vreg_s4a_1p8: pm8998-smps4 {
  compatible = "regulator-fixed";
  regulator-name = "vreg_s4a_1p8";

  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  regulator-always-on;
  regulator-boot-on;

  vin-supply = <&vph_pwr>;
 };

 reserved-memory {
  memory@9d400000 {
   reg = <0x0 0x9d400000 0x0 0x02400000>;
   no-map;
  };

  memory@a1300000 {
   compatible = "ramoops";
   reg = <0x0 0xa1300000 0x0 0x100000>;
   record-size = <0x40000>;
   console-size = <0x40000>;
   ftrace-size = <0x40000>;
   pmsg-size = <0x40000>;
  };

  /*
   * It seems like reserving the old rmtfs_mem region is also needed to prevent
   * random crashes which are most likely modem related, more testing needed.
   */
  removed_region: removed-region@88f00000 {
   reg = <0 0x88f00000 0 0x1c00000>;
   no-map;
  };

  slpi_mem: slpi@96700000 {
   reg = <0 0x96700000 0 0xf00000>;
   no-map;
  };

  spss_mem: spss@97700000 {
   reg = <0 0x97700000 0 0x100000>;
   no-map;
  };

  adsp_mem: memory@97800000 {
   reg = <0 0x97800000 0 0x2000000>;
   no-map;
  };

  rmtfs_mem: rmtfs-mem@fde00000 {
   compatible = "qcom,rmtfs-mem";
   reg = <0 0xfde00000 0 0x202000>;
   qcom,use-guard-pages;
   no-map;

   qcom,client-id = <1>;
   qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  };
 };

 i2c21 {
  compatible = "i2c-gpio";
  sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
  scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
  i2c-gpio,delay-us = <2>;
  pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
  pinctrl-names = "default";
  #address-cells = <1>;
  #size-cells = <0>;

  pmic@60 {
   compatible = "samsung,s2dos05";
   reg = <0x60>;

   regulators {
    s2dos05_ldo1: ldo1 {
     regulator-active-discharge = <1>;
     regulator-enable-ramp-delay = <12000>;
     regulator-min-microvolt = <1500000>;
     regulator-max-microvolt = <2000000>;
     regulator-name = "ldo1";
    };

    s2dos05_ldo2: ldo2 {
     regulator-active-discharge = <1>;
     regulator-boot-on;
     regulator-enable-ramp-delay = <12000>;
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-name = "ldo2";
    };

    s2dos05_ldo3: ldo3 {
     regulator-active-discharge = <1>;
     regulator-boot-on;
     regulator-enable-ramp-delay = <12000>;
     regulator-min-microvolt = <3000000>;
     regulator-max-microvolt = <3000000>;
     regulator-name = "ldo3";
    };

    s2dos05_ldo4: ldo4 {
     regulator-active-discharge = <1>;
     regulator-enable-ramp-delay = <12000>;
     regulator-min-microvolt = <2700000>;
     regulator-max-microvolt = <3775000>;
     regulator-name = "ldo4";
    };

    s2dos05_buck: buck {
     regulator-active-discharge = <1>;
     regulator-enable-ramp-delay = <12000>;
     regulator-min-microvolt = <850000>;
     regulator-max-microvolt = <2100000>;
     regulator-name = "buck";
    };
   };
  };
 };

 gpio-keys {
  compatible = "gpio-keys";
  autorepeat;

  key-vol-up {
   label = "Volume Up";
   gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEUP>;
   debounce-interval = <15>;
  };

  key-wink {
   label = "Bixby";
   gpios = <&pm8998_gpios 19 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_ENTER>;
   debounce-interval = <15>;
  };
 };

 vib_pwm: pwm {
  compatible = "clk-pwm";
  #pwm-cells = <2>;
  assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
  assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
  clocks = <&gcc GCC_GP1_CLK>;
  pinctrl-0 = <&motor_pwm_default_state>;
  pinctrl-1 = <&motor_pwm_suspend_state>;
  pinctrl-names = "default", "suspend";
 };
};

&gpu {
 status = "okay";

 zap-shader {
  memory-region = <&gpu_mem>;
  firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn";
 };
};

&mdss {
 status = "okay";
};

&mdss_dsi0 {
 vdda-supply = <&vreg_l26a_1p2>;
 status = "okay";

 panel@0 {
  compatible = "samsung,s6e3ha8";
  reg = <0>;
  vci-supply = <&s2dos05_ldo4>;
  vddr-supply = <&s2dos05_buck>;
  vdd3-supply = <&s2dos05_ldo1>;
  te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
  reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&dsi_default &dsi_te>;
  pinctrl-1 = <&dsi_suspend &dsi_te>;
  pinctrl-names = "default", "suspend";

  port {
   panel_in: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };
};

&mdss_dsi0_out {
 data-lanes = <0 1 2 3>;
 remote-endpoint = <&panel_in>;
};

&mdss_dsi0_phy {
 vdds-supply = <&vdda_mipi_dsi0_pll>;
 status = "okay";
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8998-rpmh-regulators";
  qcom,pmic-id = "a";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;
  vdd-s11-supply = <&vph_pwr>;
  vdd-s12-supply = <&vph_pwr>;
  vdd-s13-supply = <&vph_pwr>;
  vdd-l1-l27-supply = <&vreg_s7a_1p025>;
  vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  vdd-l3-l11-supply = <&vreg_s7a_1p025>;
  vdd-l4-l5-supply = <&vreg_s7a_1p025>;
  vdd-l6-supply = <&vph_pwr>;
  vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  vdd-l26-supply = <&vreg_s3a_1p35>;
  vin-lvs-1-2-supply = <&vreg_s4a_1p8>;

  vreg_s2a_1p125: smps2 {
   regulator-min-microvolt = <1100000>;
   regulator-max-microvolt = <1100000>;
  };

  vreg_s3a_1p35: smps3 {
   regulator-min-microvolt = <1352000>;
   regulator-max-microvolt = <1352000>;
  };

  vreg_s5a_2p04: smps5 {
   regulator-min-microvolt = <1904000>;
   regulator-max-microvolt = <2040000>;
  };

  vreg_s7a_1p025: smps7 {
   regulator-min-microvolt = <900000>;
   regulator-max-microvolt = <1028000>;
  };

  vdd_qusb_hs0:
  vdda_hp_pcie_core:
  vdda_mipi_csi0_0p9:
  vdda_mipi_csi1_0p9:
  vdda_mipi_csi2_0p9:
  vdda_mipi_dsi0_pll:
  vdda_mipi_dsi1_pll:
  vdda_qlink_lv:
  vdda_qlink_lv_ck:
  vdda_qrefs_0p875:
  vdda_pcie_core:
  vdda_pll_cc_ebi01:
  vdda_pll_cc_ebi23:
  vdda_sp_sensor:
  vdda_ufs1_core:
  vdda_ufs2_core:
  vreg_l1a_0p875: ldo1 {
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_10:
  vreg_l2a_1p2: ldo2 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-always-on;
  };

  vreg_l3a_1p0: ldo3 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_usb1_ss_core:
  vdd_wcss_cx:
  vdd_wcss_mx:
  vdda_wcss_pll:
  vreg_l5a_0p8: ldo5 {
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_13:
  vreg_l6a_1p8: ldo6 {
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <1856000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7a_1p8: ldo7 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8a_1p2: ldo8 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1248000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9a_1p8: ldo9 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a_1p8: ldo10 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a_1p0: ldo11 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1048000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdd_qfprom:
  vdd_qfprom_sp:
  vdda_apc1_cs_1p8:
  vdda_gfx_cs_1p8:
  vdda_qrefs_1p8:
  vdda_qusb_hs0_1p8:
  vddpx_11:
  vreg_l12a_1p8: ldo12 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_2:
  vreg_l13a_2p95: ldo13 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14a_1p88: ldo14 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15a_1p8: ldo15 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16a_2p7: ldo16 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2704000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a_1p3: ldo17 {
   regulator-min-microvolt = <1304000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l18a_2p7: ldo18 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l19a_3p0: ldo19 {
   regulator-min-microvolt = <2856000>;
   regulator-max-microvolt = <3104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l20a_2p95: ldo20 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l21a_2p95: ldo21 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l22a_2p85: ldo22 {
   regulator-min-microvolt = <2864000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l23a_3p3: ldo23 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_qusb_hs0_3p1:
  vreg_l24a_3p075: ldo24 {
   regulator-min-microvolt = <3088000>;
   regulator-max-microvolt = <3088000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l25a_3p3: ldo25 {
   regulator-min-microvolt = <3300000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_hp_pcie_1p2:
  vdda_hv_ebi0:
  vdda_hv_ebi1:
  vdda_hv_ebi2:
  vdda_hv_ebi3:
  vdda_mipi_csi_1p25:
  vdda_mipi_dsi0_1p2:
  vdda_mipi_dsi1_1p2:
  vdda_pcie_1p2:
  vdda_ufs1_1p2:
  vdda_ufs2_1p2:
  vdda_usb1_ss_1p2:
  vdda_usb2_ss_1p2:
  vreg_l26a_1p2: ldo26 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l28a_3p0: ldo28 {
   regulator-min-microvolt = <2856000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_lvs1a_1p8: lvs1 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };

  vreg_lvs2a_1p8: lvs2 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm8005-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  vreg_s3c_0p6: smps3 {
   regulator-min-microvolt = <600000>;
   regulator-max-microvolt = <600000>;
  };
 };
};

&gcc {
 protected-clocks = <GCC_QSPI_CORE_CLK>,
    <GCC_QSPI_CORE_CLK_SRC>,
    <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
    <GCC_LPASS_Q6_AXI_CLK>,
    <GCC_LPASS_SWAY_CLK>;
};

&i2c10 {
 clock-frequency = <400000>;
 status = "okay";
};

&qupv3_id_1 {
 status = "okay";
};

&gpi_dma1 {
 status = "okay";
};

&uart9 {
 status = "okay";
};

&i2c14 {
 status = "okay";

 pmic@66 {
  compatible = "maxim,max77705";
  reg = <0x66>;
  interrupt-parent = <&pm8998_gpios>;
  interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-0 = <&pmic_int_default>;
  pinctrl-names = "default";
  #address-cells = <1>;
  #size-cells = <0>;

  leds {
   compatible = "maxim,max77705-rgb";

   multi-led {
    color = <LED_COLOR_ID_RGB>;
    function = LED_FUNCTION_STATUS;
    #address-cells = <1>;
    #size-cells = <0>;

    led@1 {
     reg = <1>;
     color = <LED_COLOR_ID_RED>;
    };

    led@2 {
     reg = <2>;
     color = <LED_COLOR_ID_GREEN>;
    };

    led@3 {
     reg = <3>;
     color = <LED_COLOR_ID_BLUE>;
    };
   };
  };

  haptic {
   compatible = "maxim,max77705-haptic";
   haptic-supply = <&vib_regulator>;
   pwms = <&vib_pwm 0 52084>;
  };
 };

 max77705_charger: charger@69 {
  reg = <0x69>;
  compatible = "maxim,max77705-charger";
  monitored-battery = <&battery>;
  interrupt-parent = <&pm8998_gpios>;
  interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

 };

 fuel-gauge@36 {
  reg = <0x36>;
  compatible = "maxim,max77705-battery";
  power-supplies = <&max77705_charger>;
  maxim,rsns-microohm = <5000>;
  interrupt-parent = <&pm8998_gpios>;
  interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 };
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 vcc-supply = <&vreg_l20a_2p95>;
 vcc-max-microamp = <600000>;
 status = "okay";
};

&ufs_mem_phy {
 vdda-phy-supply = <&vdda_ufs1_core>;
 vdda-pll-supply = <&vdda_ufs1_1p2>;
 status = "okay";
};

&sdhc_2 {
 pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
 pinctrl-names = "default";
 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 vmmc-supply = <&vreg_l21a_2p95>;
 vqmmc-supply = <&vddpx_2>;
 status = "okay";
};

&i2c11 {
 clock-frequency = <400000>;
 status = "okay";

 touchscreen@48 {
  compatible = "samsung,s6sy761";
  reg = <0x48>;
  interrupt-parent = <&tlmm>;
  interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
  vdd-supply = <&s2dos05_ldo2>;
  avdd-supply = <&s2dos05_ldo3>;

  pinctrl-0 = <&touch_irq_state>;
  pinctrl-names = "default";
 };
};

&adsp_pas {
 firmware-name = "qcom/sdm845/starqltechn/adsp.mbn";
 status = "okay";
};

&lpasscc {
 status = "okay";
};

&sound {
 compatible = "qcom,sdm845-sndcard";
 model = "Samsung Galaxy S9";
 pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
 pinctrl-names = "default";
 status = "okay";

 audio-routing = "RX_BIAS", "MCLK",
   "AMIC2", "MIC BIAS2", /* Headset Mic */
   "AMIC3", "MIC BIAS2", /* FM radio left Tx */
   "AMIC4", "MIC BIAS2", /* FM radio right Tx */
   "DMIC0", "MCLK", /* Bottom Mic */
   "DMIC0", "MIC BIAS1",
   "DMIC2", "MCLK", /* Top Mic */
   "DMIC2", "MIC BIAS3";

 mm1-dai-link {
  link-name = "MultiMedia1";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
  };
 };

 mm2-dai-link {
  link-name = "MultiMedia2";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
  };
 };

 mm3-dai-link {
  link-name = "MultiMedia3";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
  };
 };

 mm4-dai-link {
  link-name = "MultiMedia4";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
  };
 };

 mm5-dai-link {
  link-name = "MultiMedia5";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
  };
 };

 mm6-dai-link {
  link-name = "MultiMedia6";

  cpu {
   sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
  };
 };

 slim-dai-link {
  link-name = "SLIM Playback 1";

  codec {
   sound-dai = <&wcd9340 AIF1_PB>;
  };

  cpu {
   sound-dai = <&q6afedai SLIMBUS_0_RX>;
  };

  platform {
   sound-dai = <&q6routing>;
  };
 };

 slimcap-dai-link {
  link-name = "SLIM Capture 1";

  codec {
   sound-dai = <&wcd9340 AIF1_CAP>;
  };

  cpu {
   sound-dai = <&q6afedai SLIMBUS_0_TX>;
  };

  platform {
   sound-dai = <&q6routing>;
  };
 };

 slim2-dai-link {
  link-name = "SLIM Playback 2";

  codec {
   sound-dai = <&wcd9340 AIF2_PB>;
  };

  cpu {
   sound-dai = <&q6afedai SLIMBUS_1_RX>;
  };

  platform {
   sound-dai = <&q6routing>;
  };
 };

 slimcap2-dai-link {
  link-name = "SLIM Capture 2";

  codec {
   sound-dai = <&wcd9340 AIF2_CAP>;
  };

  cpu {
   sound-dai = <&q6afedai SLIMBUS_1_TX>;
  };

  platform {
   sound-dai = <&q6routing>;
  };
 };

 slimcap3-dai-link {
  link-name = "SLIM Capture 3";

  codec {
   sound-dai = <&wcd9340 AIF3_CAP>;
  };

  cpu {
   sound-dai = <&q6afedai SLIMBUS_2_TX>;
  };

  platform {
   sound-dai = <&q6routing>;
  };
 };
};

&q6afedai {
 dai@22 {
  reg = <22>;
  qcom,sd-lines = <1>;
 };

 dai@23 {
  reg = <23>;
  qcom,sd-lines = <0>;
 };
};

&q6asmdai {
 dai@0 {
  reg = <0>;
 };

 dai@1 {
  reg = <1>;
 };

 dai@2 {
  reg = <2>;
 };

 dai@3 {
  reg = <3>;
 };

 dai@4 {
  reg = <4>;
 };

 dai@5 {
  reg = <5>;
 };
};

&wcd9340 {
 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 vdd-buck-supply = <&vreg_s4a_1p8>;
 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 vdd-tx-supply = <&vreg_s4a_1p8>;
 vdd-rx-supply = <&vreg_s4a_1p8>;
 vdd-io-supply = <&vreg_s4a_1p8>;
 qcom,micbias1-microvolt = <1800000>;
 qcom,micbias2-microvolt = <2700000>;
 qcom,micbias3-microvolt = <1800000>;
 qcom,micbias4-microvolt = <1800000>;
};

&mss_pil {
 firmware-name = "qcom/sdm845/starqltechn/mba.mbn",
   "qcom/sdm845/starqltechn/modem.mbn";
 status = "okay";
};

&ipa {
 qcom,gsi-loader = "self";
 memory-region = <&ipa_fw_mem>;
 firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
 status = "okay";
};

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 /* Until we have Type C hooked up we'll force this as peripheral. */
 dr_mode = "peripheral";
};

&usb_1_hsphy {
 vdd-supply = <&vdda_usb1_ss_core>;
 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;

 qcom,imp-res-offset-value = <8>;
 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 status = "okay";
};

&usb_1_qmpphy {
 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 vdda-pll-supply = <&vdda_usb1_ss_core>;
 status = "okay";
};

&pm8998_resin {
 linux,code = <KEY_VOLUMEDOWN>;
 status = "okay";
};

&pm8998_gpios {
 pmic_int_default: pmic-int-default-state {
  pins = "gpio11";
  function = "normal";
  input-enable;
  bias-disable;
  power-source = <0>;
 };
};

&tlmm {
 gpio-reserved-ranges = <27 4>, /* SPI (eSE - embedded Secure Element) */
          <85 4>; /* SPI (fingerprint reader) */

 dsi_default: dsi-default-state {
  pins = "gpio6";
  function = "gpio";
  drive-strength = <8>;
  bias-disable;
 };

 dsi_suspend: dsi-suspend-state {
  pins = "gpio6";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 dsi_te: dsi-te-state {
  pins = "gpio10";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 i2c21_sda_state: i2c21-sda-state {
  pins = "gpio127";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 i2c21_scl_state: i2c21-scl-state {
  pins = "gpio128";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 motor_pwm_default_state: motor-pwm-active-state {
  pins = "gpio57";
  function = "gcc_gp1";
  drive-strength = <2>;
  bias-disable;
  output-high;
 };

 motor_pwm_suspend_state: motor-pwm-suspend-state {
  pins = "gpio57";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
  output-low;
 };

 sdc2_clk_state: sdc2-clk-state {
  pins = "sdc2_clk";
  bias-disable;

  /*
   * It seems that mmc_test reports errors if drive
   * strength is not 16 on clk, cmd, and data pins.
   */
  drive-strength = <16>;
 };

 sdc2_cmd_state: sdc2-cmd-state {
  pins = "sdc2_cmd";
  bias-pull-up;
  drive-strength = <16>;
 };

 sdc2_data_state: sdc2-data-state {
  pins = "sdc2_data";
  bias-pull-up;
  drive-strength = <16>;
 };

 sd_card_det_n_state: sd-card-det-n-state {
  pins = "gpio126";
  function = "gpio";
  bias-pull-up;
 };

 touch_irq_state: touch-irq-state {
  pins = "gpio120";
  function = "gpio";
  bias-disable;
 };
};

&qup_i2c11_default {
 drive-strength = <2>;
 bias-disable;
};