Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024, Linaro Limited
*/
#include <dt-bindings/input/input.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm8550-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8550_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550ve-2-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8550ve_2_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pmc8380-3-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmc8380_3_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pmc8380-4-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmc8380_4_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pmc8380-5-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmc8380_5_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pmc8380_6_thermal: pmc8380-6-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pmc8380_6_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550ve-8-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8550ve_8_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550ve-9-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8550ve_9_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8010-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8010_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
};
};
&spmi_bus0 {
/* PMK8380 */
pmk8550: pmic@0 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmk8550_pon: pon@1300 {
compatible = "qcom,pmk8350-pon";
reg = <0x1300>, <0x800>;
reg-names = "hlos", "pbs";
pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_POWER>;
};
pon_resin: resin {
compatible = "qcom,pmk8350-resin";
interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
status = "disabled";
};
};
pmk8550_rtc: rtc@6100 {
compatible = "qcom,pmk8350-rtc";
reg = <0x6100>, <0x6200>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
qcom,no-alarm; /* alarm owned by ADSP */
qcom,uefi-rtc-info;
};
pmk8550_sdam_2: nvram@7100 {
compatible = "qcom,spmi-sdam";
reg = <0x7100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x7100 0x100>;
reboot_reason: reboot-reason@48 {
reg = <0x48 0x1>;
bits = <1 7>;
};
};
pmk8550_gpios: gpio@8800 {
compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
reg = <0xb800>;
gpio-controller;
gpio-ranges = <&pmk8550_gpios 0 0 6>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pmk8550_pwm: pwm {
compatible = "qcom,pmk8550-pwm";
#pwm-cells = <2>;
status = "disabled";
};
};
/* PMC8380C */
pm8550: pmic@1 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550_gpios: gpio@8800 {
compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pm8550_flash: led-controller@ee00 {
compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
reg = <0xee00>;
status = "disabled";
};
pm8550_pwm: pwm {
compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
#pwm-cells = <2>;
status = "disabled";
};
};
/* PMC8380VE */
pm8550ve_2: pmic@2 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550ve_2_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_2_gpios: gpio@8800 {
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550ve_2_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
/* PMC8380 is actually not a PM8550 series rebrand */
pmc8380_3: pmic@3 {
compatible = "qcom,pmc8380", "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmc8380_3_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pmc8380_3_gpios: gpio@8800 {
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmc8380_3_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmc8380_4: pmic@4 {
compatible = "qcom,pmc8380", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmc8380_4_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pmc8380_4_gpios: gpio@8800 {
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmc8380_4_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmc8380_5: pmic@5 {
compatible = "qcom,pmc8380", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmc8380_5_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pmc8380_5_gpios: gpio@8800 {
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmc8380_5_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmc8380_6: pmic@6 {
compatible = "qcom,pmc8380", "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmc8380_6_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pmc8380_6_gpios: gpio@8800 {
compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pmc8380_6_gpios 0 0 10>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
/* PMC8380VE */
pm8550ve_8: pmic@8 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550ve_8_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_8_gpios: gpio@8800 {
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550ve_8_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
/* PMC8380VE */
pm8550ve_9: pmic@9 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x9 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550ve_9_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550ve_9_gpios: gpio@8800 {
compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550ve_9_gpios 0 0 8>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8010: pmic@c {
compatible = "qcom,pm8010", "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
pm8010_temp_alarm: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
};
};
&spmi_bus1 {
smb2360_0: pmic@7 {
compatible = "qcom,smb2360", "qcom,spmi-pmic";
reg = <0x7 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
smb2360_0_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
#phy-cells = <0>;
};
};
smb2360_1: pmic@a {
compatible = "qcom,smb2360", "qcom,spmi-pmic";
reg = <0xa SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
smb2360_1_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
#phy-cells = <0>;
};
};
smb2360_2: pmic@b {
compatible = "qcom,smb2360", "qcom,spmi-pmic";
reg = <0xb SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
smb2360_2_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
#phy-cells = <0>;
};
};
smb2360_3: pmic@c {
compatible = "qcom,smb2360", "qcom,spmi-pmic";
reg = <0xc SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
smb2360_3_eusb2_repeater: phy@fd00 {
compatible = "qcom,smb2360-eusb2-repeater";
reg = <0xfd00>;
#phy-cells = <0>;
};
};
};
