Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/renesas/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 7 kB image not shown  

Quelle  white-hawk-cpu-common.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
 * Device Tree Source for the common parts shared by the White Hawk CPU and
 * White Hawk Single boards
 *
 * Copyright (C) 2022 Renesas Electronics Corp.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
 aliases {
  ethernet0 = &avb0;
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  i2c3 = &i2c3;
  i2c4 = &i2c4;
  i2c5 = &i2c5;
  serial0 = &hscif0;
 };

 chosen {
  bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  stdout-path = "serial0:921600n8";
 };

 sn65dsi86_refclk: clk-x6 {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <38400000>;
 };

 keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&keys_pins>;
  pinctrl-names = "default";

  key-1 {
   gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_1>;
   label = "SW47";
   wakeup-source;
   debounce-interval = <20>;
  };

  key-2 {
   gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_2>;
   label = "SW48";
   wakeup-source;
   debounce-interval = <20>;
  };

  key-3 {
   gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_3>;
   label = "SW49";
   wakeup-source;
   debounce-interval = <20>;
  };
 };

 leds {
  compatible = "gpio-leds";

  led-1 {
   gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <1>;
  };

  led-2 {
   gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <2>;
  };

  led-3 {
   gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <3>;
  };
 };

 memory@48000000 {
  device_type = "memory";
  /* first 128MB is reserved for secure area. */
  reg = <0x0 0x48000000 0x0 0x78000000>;
 };

 memory@480000000 {
  device_type = "memory";
  reg = <0x4 0x80000000 0x0 0x80000000>;
 };

 memory@600000000 {
  device_type = "memory";
  reg = <0x6 0x00000000 0x1 0x00000000>;
 };

 mini-dp-con {
  compatible = "dp-connector";
  label = "CN5";
  type = "mini";

  port {
   mini_dp_con_in: endpoint {
    remote-endpoint = <&sn65dsi86_out>;
   };
  };
 };

 pcie_clk: clk-9fgv0841-pci {
  compatible = "fixed-clock";
  clock-frequency = <100000000>;
  #clock-cells = <0>;
 };

 reg_1p2v: regulator-1p2v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-1.2V";
  regulator-min-microvolt = <1200000>;
  regulator-max-microvolt = <1200000>;
  regulator-boot-on;
  regulator-always-on;
 };

 reg_1p8v: regulator-1p8v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-1.8V";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-boot-on;
  regulator-always-on;
 };

 reg_3p3v: regulator-3p3v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-3.3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-boot-on;
  regulator-always-on;
 };
};

&avb0 {
 pinctrl-0 = <&avb0_pins>;
 pinctrl-names = "default";
 phy-handle = <&avb0_phy>;
 tx-internal-delay-ps = <2000>;
 status = "okay";

 mdio {
  #address-cells = <1>;
  #size-cells = <0>;

  avb0_phy: ethernet-phy@0 {
   compatible = "ethernet-phy-id0022.1622",
         "ethernet-phy-ieee802.3-c22";
   rxc-skew-ps = <1500>;
   reg = <0>;
   interrupts-extended = <&gpio7 5 IRQ_TYPE_LEVEL_LOW>;
   reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
  };
 };
};

&dsi0 {
 status = "okay";

 ports {
  port@1 {
   dsi0_out: endpoint {
    remote-endpoint = <&sn65dsi86_in>;
    data-lanes = <1 2 3 4>;
   };
  };
 };
};

&du {
 status = "okay";
};

&extal_clk {
 clock-frequency = <16666666>;
};

&extalr_clk {
 clock-frequency = <32768>;
};

&hscif0 {
 pinctrl-0 = <&hscif0_pins>;
 pinctrl-names = "default";
 bootph-all;

 status = "okay";
};

&i2c0 {
 pinctrl-0 = <&i2c0_pins>;
 pinctrl-names = "default";

 status = "okay";
 clock-frequency = <400000>;

 io_expander_a: gpio@20 {
  compatible = "onnn,pca9654";
  reg = <0x20>;
  interrupts-extended = <&gpio0 0 IRQ_TYPE_LEVEL_LOW>;
  gpio-controller;
  #gpio-cells = <2>;
  interrupt-controller;
  #interrupt-cells = <2>;
 };

 eeprom@50 {
  compatible = "rohm,br24g01", "atmel,24c01";
  label = "cpu-board";
  reg = <0x50>;
  pagesize = <8>;
 };
};

&i2c1 {
 pinctrl-0 = <&i2c1_pins>;
 pinctrl-names = "default";

 status = "okay";
 clock-frequency = <400000>;

 bridge@2c {
  pinctrl-0 = <&irq0_pins>;
  pinctrl-names = "default";

  compatible = "ti,sn65dsi86";
  reg = <0x2c>;

  clocks = <&sn65dsi86_refclk>;
  clock-names = "refclk";

  interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;

  enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;

  vccio-supply = <®_1p8v>;
  vpll-supply = <®_1p8v>;
  vcca-supply = <®_1p2v>;
  vcc-supply = <®_1p2v>;

  ports {
   #address-cells = <1>;
   #size-cells = <0>;

   port@0 {
    reg = <0>;
    sn65dsi86_in: endpoint {
     remote-endpoint = <&dsi0_out>;
    };
   };

   port@1 {
    reg = <1>;
    sn65dsi86_out: endpoint {
     remote-endpoint = <&mini_dp_con_in>;
    };
   };
  };
 };
};

&mmc0 {
 pinctrl-0 = <&mmc_pins>;
 pinctrl-1 = <&mmc_pins>;
 pinctrl-names = "default", "state_uhs";

 vmmc-supply = <®_3p3v>;
 vqmmc-supply = <®_1p8v>;
 mmc-hs200-1_8v;
 mmc-hs400-1_8v;
 bus-width = <8>;
 no-sd;
 no-sdio;
 non-removable;
 full-pwr-cycle-in-suspend;
 status = "okay";
};

&pcie0_clkref {
 compatible = "gpio-gate-clock";
 clocks = <&pcie_clk>;
 enable-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
 /delete-property/ clock-frequency;
};

&pciec0 {
 reset-gpios = <&io_expander_a 0 GPIO_ACTIVE_LOW>;
 status = "okay";
};

&pfc {
 pinctrl-0 = <&scif_clk_pins>;
 pinctrl-names = "default";

 avb0_pins: avb0 {
  mux {
   groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
     "avb0_txcrefclk";
   function = "avb0";
  };

  pins_mdio {
   groups = "avb0_mdio";
   drive-strength = <21>;
  };

  pins_mii {
   groups = "avb0_rgmii";
   drive-strength = <21>;
  };

 };

 hscif0_pins: hscif0 {
  groups = "hscif0_data";
  function = "hscif0";
 };

 i2c0_pins: i2c0 {
  groups = "i2c0";
  function = "i2c0";
 };

 i2c1_pins: i2c1 {
  groups = "i2c1";
  function = "i2c1";
 };

 irq0_pins: irq0 {
  groups = "intc_ex_irq0_a";
  function = "intc_ex";
 };

 keys_pins: keys {
  pins = "GP_5_0", "GP_5_1", "GP_5_2";
  bias-pull-up;
 };

 mmc_pins: mmc {
  groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
  function = "mmc";
  power-source = <1800>;
 };

 qspi0_pins: qspi0 {
  groups = "qspi0_ctrl", "qspi0_data4";
  function = "qspi0";
 };

 scif_clk_pins: scif_clk {
  groups = "scif_clk";
  function = "scif_clk";
 };
};

&rpc {
 pinctrl-0 = <&qspi0_pins>;
 pinctrl-names = "default";

 status = "okay";

 flash@0 {
  compatible = "spansion,s25fs512s", "jedec,spi-nor";
  reg = <0>;
  spi-max-frequency = <40000000>;
  spi-rx-bus-width = <4>;

  partitions {
   compatible = "fixed-partitions";
   #address-cells = <1>;
   #size-cells = <1>;

   boot@0 {
    reg = <0x0 0x1200000>;
    read-only;
   };
   user@1200000 {
    reg = <0x1200000 0x2e00000>;
   };
  };
 };
};

&rwdt {
 timeout-sec = <60>;
 status = "okay";
};

&scif_clk {
 clock-frequency = <24000000>;
};

[ Dauer der Verarbeitung: 0.37 Sekunden  ]