Quelle  rk3566-powkiddy-rk2023.dts   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3566-powkiddy-rk2023.dtsi"

/ {
 model = "Powkiddy RK2023";
 compatible = "powkiddy,rk2023", "rockchip,rk3566";
};

&cru {
 assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
     <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
 assigned-clock-rates = <32768>, <1200000000>,
     <200000000>, <115200000>;
};

&dsi0 {
 panel: panel@0 {
  compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
  reg = <0>;
  backlight = <&backlight>;
  pinctrl-names = "default";
  pinctrl-0 = <&lcd_rst>;
  reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
  vdd-supply = <&vcc3v3_lcd0_n>;

  port {
   mipi_in_panel: endpoint {
    remote-endpoint = <&mipi_out_panel>;
   };
  };
 };
};

&i2c0 {
 vdd_cpu: regulator@1c {
  compatible = "tcs,tcs4525";
  reg = <0x1c>;
  fcs,suspend-voltage-selector = <1>;
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <712500>;
  regulator-max-microvolt = <1390000>;
  regulator-name = "vdd_cpu";
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc_sys>;
  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };
};