Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/rockchip/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 6 kB image not shown  

Quelle  rk3588-edgeble-neu6a-io.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/soc/rockchip,vop2.h>

/ {
 chosen {
  stdout-path = "serial2:1500000n8";
 };

 hdmi1-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi1_con_in: endpoint {
    remote-endpoint = <&hdmi1_out_con>;
   };
  };
 };

 /* Unnamed gated oscillator: 100MHz,3.3V,3225 */
 pcie30_port0_refclk: pcie30_port1_refclk: pcie-oscillator {
  compatible = "gated-fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <100000000>;
  clock-output-names = "pcie30_refclk";
  vdd-supply = <&vcc3v3_pi6c_05>;
 };

 vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_pcie2x1l0";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  startup-delay-us = <5000>;
  vin-supply = <&vcc_3v3_s3>;
 };

 vcc3v3_bkey: regulator-vcc3v3-bkey {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
  pinctrl-names = "default";
  pinctrl-0 = <&pcie_4g_pwen>;
  regulator-name = "vcc3v3_bkey";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  startup-delay-us = <5000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc3v3_pcie30: vcc3v3_pi6c_05: regulator-vcc3v3-pi6c-05 {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; /* PCIE30x4_PWREN_H */
  pinctrl-names = "default";
  pinctrl-0 = <&pcie30x4_pwren_h>;
  regulator-name = "vcc3v3_pcie30";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  startup-delay-us = <5000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_host: regulator-vcc5v0-host {
  compatible = "regulator-fixed";
  enable-active-high;
  gpio = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_host_en>;
  regulator-name = "vcc5v0_host";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-boot-on;
  regulator-always-on;
  vin-supply = <&vcc5v0_sys>;
 };
};

&combphy0_ps {
 status = "okay";
};

&combphy1_ps {
 status = "okay";
};

&combphy2_psu {
 status = "okay";
};

&hdmi1 {
 status = "okay";
};

&hdmi1_in {
 hdmi1_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi1>;
 };
};

&hdmi1_out {
 hdmi1_out_con: endpoint {
  remote-endpoint = <&hdmi1_con_in>;
 };
};

&hdptxphy1 {
 status = "okay";
};

&i2c6 {
 status = "okay";

 hym8563: rtc@51 {
  compatible = "haoyu,hym8563";
  reg = <0x51>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
  #clock-cells = <0>;
  clock-output-names = "hym8563";
  pinctrl-names = "default";
  pinctrl-0 = <&hym8563_int>;
  wakeup-source;
 };
};

/* ETH */
&pcie2x1l0 {
 pinctrl-names = "default";
 pinctrl-0 = <&pcie2_0_rst>;
 reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; /* PCIE20_1_PERST_L */
 vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
 status = "okay";
};

&pcie30phy {
 data-lanes = <1 1 2 2>;
 /* separate clock lines from the clock generator to phy and devices */
 rockchip,rx-common-refclk-mode = <0 0 0 0>;
 status = "okay";
};

/* M-Key */
&pcie3x2 {
 /*
  * The board has a "pcie_refclk" oscillator that needs enabling,
  * so add it to the list of clocks.
  */
 clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
   <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
   <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>,
   <&pcie30_port1_refclk>;
 clock-names = "aclk_mst", "aclk_slv",
        "aclk_dbi", "pclk",
        "aux", "pipe",
        "ref";
 num-lanes = <2>;
 pinctrl-names = "default";
 pinctrl-0 = <&pcie30x2_perstn_m1_l>;
 reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; /* PCIE30X2_PERSTn_M1_L */
 vpcie3v3-supply = <&vcc3v3_pcie30>;
 status = "okay";
};

/* B-Key and E-Key */
&pcie3x4 {
 /*
  * The board has a "pcie_refclk" oscillator that needs enabling,
  * so add it to the list of clocks.
  */
 clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
   <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
   <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>,
   <&pcie30_port0_refclk>;
 clock-names = "aclk_mst", "aclk_slv",
        "aclk_dbi", "pclk",
        "aux", "pipe",
        "ref";
 pinctrl-names = "default";
 pinctrl-0 = <&pcie30x4_perstn_m1_l>;
 reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
 vpcie3v3-supply = <&vcc3v3_bkey>;
 status = "okay";
};

&pinctrl {
 pcie2 {
  pcie2_0_rst: pcie2-0-rst {
   rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pcie3 {
  pcie30x2_perstn_m1_l: pcie30x2-perstn-m1-l {
   rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pcie_4g_pwen: pcie-4g-pwen {
   rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
  };

  pcie30x4_perstn_m1_l: pcie30x4-perstn-m1-l {
   rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pcie30x4_pwren_h: pcie30x4-pwren-h {
   rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };

 hym8563 {
  hym8563_int: hym8563-int {
   rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 usb {
  vcc5v0_host_en: vcc5v0-host-en {
   rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

/* FAN */
&pwm2 {
 pinctrl-0 = <&pwm2m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&sata0 {
 status = "okay";
};

&sdmmc {
 bus-width = <4>;
 cap-mmc-highspeed;
 cap-sd-highspeed;
 disable-wp;
 no-sdio;
 no-mmc;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc_3v3_s3>;
 vqmmc-supply = <&vccio_sd_s0>;
 status = "okay";
};

&uart2 {
 pinctrl-0 = <&uart2m0_xfer>;
 status = "okay";
};

/* RS232 */
&uart6 {
 pinctrl-0 = <&uart6m0_xfer>;
 pinctrl-names = "default";
 status = "okay";
};

/* RS485 */
&uart7 {
 pinctrl-0 = <&uart7m2_xfer>;
 pinctrl-names = "default";
 status = "okay";
};

&u2phy2 {
 status = "okay";
};

&u2phy2_host {
 /* connected to USB hub, which is powered by vcc5v0_sys */
 phy-supply = <&vcc5v0_sys>;
 status = "okay";
};

&u2phy3 {
 status = "okay";
};

&u2phy3_host {
 phy-supply = <&vcc5v0_host>;
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

&usb_host1_ehci {
 status = "okay";
};

&usb_host1_ohci {
 status = "okay";
};

&usb_host2_xhci {
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vop {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
  reg = <ROCKCHIP_VOP2_EP_HDMI1>;
  remote-endpoint = <&hdmi1_in_vp0>;
 };
};

[ Dauer der Verarbeitung: 0.14 Sekunden  (vorverarbeitet)  ]