Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
/*
* P5040DS Device Tree Source
*
* Copyright 2012 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* This software is provided by Freescale Semiconductor "as is" and any
* express or implied warranties, including, but not limited to, the implied
* warranties of merchantability and fitness for a particular purpose are
* disclaimed. In no event shall Freescale Semiconductor be liable for any
* direct, indirect, incidental, special, exemplary, or consequential damages
* (including, but not limited to, procurement of substitute goods or services;
* loss of use, data, or profits; or business interruption) however caused and
* on any theory of liability, whether in contract, strict liability, or tort
* (including negligence or otherwise) arising in any way out of the use of this
* software, even if advised of the possibility of such damage.
*/
/include/ "p5040si-pre.dtsi"
/ {
model = "fsl,P5040DS";
compatible = "fsl,P5040DS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
hydra_rg = &hydra_rg;
hydra_sg_slot2 = &hydra_sg_slot2;
hydra_sg_slot3 = &hydra_sg_slot3;
hydra_sg_slot5 = &hydra_sg_slot5;
hydra_sg_slot6 = &hydra_sg_slot6;
hydra_xg_slot1 = &hydra_xg_slot1;
hydra_xg_slot2 = &hydra_xg_slot2;
};
memory {
device_type = "memory";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot";
reg = <0x00000000 0x00100000>;
};
partition@kernel {
label = "kernel";
reg = <0x00100000 0x00500000>;
};
partition@dtb {
label = "dtb";
reg = <0x00600000 0x00100000>;
};
partition@fs {
label = "file system";
reg = <0x00700000 0x00900000>;
};
};
};
i2c@118100 {
eeprom@51 {
compatible = "atmel,24c256";
reg = <0x51>;
};
eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
};
i2c@119100 {
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
ina220@44 {
compatible = "ti,ina220";
reg = <0x44>;
shunt-resistor = <1000>;
};
ina220@45 {
compatible = "ti,ina220";
reg = <0x45>;
shunt-resistor = <1000>;
};
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
fman@400000 {
ethernet@e0000 {
phy-connection-type = "sgmii";
};
ethernet@e2000 {
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-connection-type = "sgmii";
};
ethernet@e6000 {
phy-connection-type = "sgmii";
};
ethernet@e8000 {
phy-handle = <&phy_rgmii_0>;
phy-connection-type = "rgmii";
};
ethernet@f0000 {
phy-handle = <&phy_xgmii_slot_2>;
phy-connection-type = "xgmii";
};
};
fman@500000 {
ethernet@e0000 {
phy-connection-type = "sgmii";
};
ethernet@e2000 {
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-connection-type = "sgmii";
};
ethernet@e6000 {
phy-connection-type = "sgmii";
};
ethernet@e8000 {
phy-handle = <&phy_rgmii_1>;
phy-connection-type = "rgmii";
};
ethernet@f0000 {
phy-handle = <&phy_xgmii_slot_1>;
phy-connection-type = "xgmii";
};
};
};
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
3 0 0xf 0xffdf0000 0x00008000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x08000000>;
bank-width = <2>;
device-width = <2>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
partition@0 {
label = "NAND U-Boot Image";
reg = <0x0 0x02000000>;
};
partition@2000000 {
label = "NAND Root File System";
reg = <0x02000000 0x10000000>;
};
partition@12000000 {
label = "NAND Compressed RFS Image";
reg = <0x12000000 0x08000000>;
};
partition@1a000000 {
label = "NAND Linux Kernel Image";
reg = <0x1a000000 0x04000000>;
};
partition@1e000000 {
label = "NAND DTB Image";
reg = <0x1e000000 0x01000000>;
};
partition@1f000000 {
label = "NAND Writable User area";
reg = <0x1f000000 0x01000000>;
};
};
board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
reg = <3 0 0x40>;
ranges = <0 3 0 0x40>;
mdio-mux-emi1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio0>;
reg = <9 1>;
mux-mask = <0x78>;
hydra_rg:rgmii-mdio@8 {
#address-cells = <1>;
#size-cells = <0>;
reg = <8>;
status = "disabled";
phy_rgmii_0: ethernet-phy@0 {
reg = <0x0>;
};
phy_rgmii_1: ethernet-phy@1 {
reg = <0x1>;
};
};
hydra_sg_slot2: sgmii-mdio@28 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x28>;
status = "disabled";
phy_sgmii_slot2_1c: ethernet-phy@1c {
reg = <0x1c>;
};
phy_sgmii_slot2_1d: ethernet-phy@1d {
reg = <0x1d>;
};
phy_sgmii_slot2_1e: ethernet-phy@1e {
reg = <0x1e>;
};
phy_sgmii_slot2_1f: ethernet-phy@1f {
reg = <0x1f>;
};
};
hydra_sg_slot3: sgmii-mdio@68 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x68>;
status = "disabled";
phy_sgmii_slot3_1c: ethernet-phy@1c {
reg = <0x1c>;
};
phy_sgmii_slot3_1d: ethernet-phy@1d {
reg = <0x1d>;
};
phy_sgmii_slot3_1e: ethernet-phy@1e {
reg = <0x1e>;
};
phy_sgmii_slot3_1f: ethernet-phy@1f {
reg = <0x1f>;
};
};
hydra_sg_slot5: sgmii-mdio@38 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x38>;
status = "disabled";
phy_sgmii_slot5_1c: ethernet-phy@1c {
reg = <0x1c>;
};
phy_sgmii_slot5_1d: ethernet-phy@1d {
reg = <0x1d>;
};
phy_sgmii_slot5_1e: ethernet-phy@1e {
reg = <0x1e>;
};
phy_sgmii_slot5_1f: ethernet-phy@1f {
reg = <0x1f>;
};
};
hydra_sg_slot6: sgmii-mdio@48 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x48>;
status = "disabled";
phy_sgmii_slot6_1c: ethernet-phy@1c {
reg = <0x1c>;
};
phy_sgmii_slot6_1d: ethernet-phy@1d {
reg = <0x1d>;
};
phy_sgmii_slot6_1e: ethernet-phy@1e {
reg = <0x1e>;
};
phy_sgmii_slot6_1f: ethernet-phy@1f {
reg = <0x1f>;
};
};
};
mdio-mux-emi2 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&xmdio0>;
reg = <9 1>;
mux-mask = <0x06>;
hydra_xg_slot1: hydra-xg-slot1@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
status = "disabled";
phy_xgmii_slot_1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <4>;
};
};
hydra_xg_slot2: hydra-xg-slot2@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
phy_xgmii_slot_2: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
};
};
};
};
};
pci0: pcie@ffe200000 {
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe201000 {
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe202000 {
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "p5040si-post.dtsi"
[ Dauer der Verarbeitung: 0.37 Sekunden
]
