Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/clk/baikal-t1/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 2 kB image not shown  

Quelle  Kconfig   Sprache: C

 
SPDX-License-Identifier: GPL-2.0-only
config CLK_BAIKAL_T1
 bool "Baikal-T1 Clocks Control Unit interface"
 depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
 default MIPS_BAIKAL_T1
 help
   Clocks Control Unit is the core of Baikal-T1 SoC System Controller
   responsible for the chip subsystems clocking and resetting. It
   consists of multiple global clock domains, which can be reset by
   means of the CCU control registers. These domains and devices placed
   in them are fed with clocks generated by a hierarchy of PLLs,
   configurable and fixed clock dividers. Enable this option to be able
   to select Baikal-T1 CCU PLLs and Dividers drivers.

if CLK_BAIKAL_T1

config CLK_BT1_CCU_PLL
 bool "Baikal-T1 CCU PLLs support"
 select MFD_SYSCON
 default MIPS_BAIKAL_T1
 help
   Enable this to support the PLLs embedded into the Baikal-T1 SoC
   System Controller. These are five PLLs placed at the root of the
   clocks hierarchy, right after an external reference oscillator
   (normally of 25MHz). They are used to generate high frequency
   signals, which are either directly wired to the consumers (like
   CPUs, DDR, etc.) or passed over the clock dividers to be only
   then used as an individual reference clock of a target device.

config CLK_BT1_CCU_DIV
 bool "Baikal-T1 CCU Dividers support"
 select MFD_SYSCON
 default MIPS_BAIKAL_T1
 help
   Enable this to support the CCU dividers used to distribute clocks
   between AXI-bus and system devices coming from CCU PLLs of Baikal-T1
   SoC. CCU dividers can be either configurable or with fixed divider,
   either gateable or ungateable. Some of the CCU dividers can be as well
   used to reset the domains they're supplying clock to.

config CLK_BT1_CCU_RST
 bool "Baikal-T1 CCU Resets support"
 select RESET_CONTROLLER
 select MFD_SYSCON
 default MIPS_BAIKAL_T1
 help
   Enable this to support the CCU reset blocks responsible for the
   AXI-bus and some subsystems reset. These are mainly the
   self-deasserted reset controls but there are several lines which
   can be directly asserted/de-asserted (PCIe and DDR sub-domains).

endif

Messung V0.5
C=97 H=84 G=90

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.