Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/gpio/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 5 kB image not shown  

Quelle  gpio-kempld.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Kontron PLD GPIO driver
 *
 * Copyright (c) 2010-2013 Kontron Europe GmbH
 * Author: Michael Brunner <michael.brunner@kontron.com>
 */


#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
#include <linux/mfd/kempld.h>

#define KEMPLD_GPIO_MAX_NUM  16
#define KEMPLD_GPIO_MASK(x)  (BIT((x) % 8))
#define KEMPLD_GPIO_DIR_NUM(x)  (0x40 + (x) / 8)
#define KEMPLD_GPIO_LVL_NUM(x)  (0x42 + (x) / 8)
#define KEMPLD_GPIO_EVT_LVL_EDGE 0x46
#define KEMPLD_GPIO_IEN   0x4A

struct kempld_gpio_data {
 struct gpio_chip  chip;
 struct kempld_device_data *pld;
};

/*
 * Set or clear GPIO bit
 * kempld_get_mutex must be called prior to calling this function.
 */

static void kempld_gpio_bitop(struct kempld_device_data *pld,
         u8 reg, u8 bit, u8 val)
{
 u8 status;

 status = kempld_read8(pld, reg);
 if (val)
  status |= KEMPLD_GPIO_MASK(bit);
 else
  status &= ~KEMPLD_GPIO_MASK(bit);
 kempld_write8(pld, reg, status);
}

static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit)
{
 u8 status;

 kempld_get_mutex(pld);
 status = kempld_read8(pld, reg);
 kempld_release_mutex(pld);

 return !!(status & KEMPLD_GPIO_MASK(bit));
}

static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset)
{
 struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
 struct kempld_device_data *pld = gpio->pld;

 return !!kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset);
}

static int kempld_gpio_set(struct gpio_chip *chip, unsigned int offset,
      int value)
{
 struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
 struct kempld_device_data *pld = gpio->pld;

 kempld_get_mutex(pld);
 kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
 kempld_release_mutex(pld);

 return 0;
}

static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
 struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
 struct kempld_device_data *pld = gpio->pld;

 kempld_get_mutex(pld);
 kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0);
 kempld_release_mutex(pld);

 return 0;
}

static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
     int value)
{
 struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
 struct kempld_device_data *pld = gpio->pld;

 kempld_get_mutex(pld);
 kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value);
 kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1);
 kempld_release_mutex(pld);

 return 0;
}

static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
{
 struct kempld_gpio_data *gpio = gpiochip_get_data(chip);
 struct kempld_device_data *pld = gpio->pld;

 if (kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset))
  return GPIO_LINE_DIRECTION_OUT;

 return GPIO_LINE_DIRECTION_IN;
}

static int kempld_gpio_pincount(struct kempld_device_data *pld)
{
 u16 evt, evt_back;

 kempld_get_mutex(pld);

 /* Backup event register as it might be already initialized */
 evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
 /* Clear event register */
 kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000);
 /* Read back event register */
 evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE);
 /* Restore event register */
 kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back);

 kempld_release_mutex(pld);

 return evt ? __ffs(evt) : 16;
}

static int kempld_gpio_probe(struct platform_device *pdev)
{
 struct device *dev = &pdev->dev;
 struct kempld_device_data *pld = dev_get_drvdata(dev->parent);
 struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
 struct kempld_gpio_data *gpio;
 struct gpio_chip *chip;
 int ret;

 if (pld->info.spec_major < 2) {
  dev_err(dev,
   "Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n");
  return -ENODEV;
 }

 gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
 if (!gpio)
  return -ENOMEM;

 gpio->pld = pld;

 platform_set_drvdata(pdev, gpio);

 chip = &gpio->chip;
 chip->label = "gpio-kempld";
 chip->owner = THIS_MODULE;
 chip->parent = dev;
 chip->can_sleep = true;
 if (pdata && pdata->gpio_base)
  chip->base = pdata->gpio_base;
 else
  chip->base = -1;
 chip->direction_input = kempld_gpio_direction_input;
 chip->direction_output = kempld_gpio_direction_output;
 chip->get_direction = kempld_gpio_get_direction;
 chip->get = kempld_gpio_get;
 chip->set = kempld_gpio_set;
 chip->ngpio = kempld_gpio_pincount(pld);
 if (chip->ngpio == 0) {
  dev_err(dev, "No GPIO pins detected\n");
  return -ENODEV;
 }

 ret = devm_gpiochip_add_data(dev, chip, gpio);
 if (ret) {
  dev_err(dev, "Could not register GPIO chip\n");
  return ret;
 }

 dev_info(dev, "GPIO functionality initialized with %d pins\n",
   chip->ngpio);

 return 0;
}

static struct platform_driver kempld_gpio_driver = {
 .driver = {
  .name = "kempld-gpio",
 },
 .probe  = kempld_gpio_probe,
};

module_platform_driver(kempld_gpio_driver);

MODULE_DESCRIPTION("KEM PLD GPIO Driver");
MODULE_AUTHOR("Michael Brunner ");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:kempld-gpio");

Messung V0.5
C=97 H=100 G=98

¤ Dauer der Verarbeitung: 0.13 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.