Quelle  hdmi_phy_8x60.c   Sprache: C

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2013 Red Hat
 * Author: Rob Clark <robdclark@gmail.com>
 */

#include <linux/delay.h>

#include "hdmi.h"

static void hdmi_phy_8x60_powerup(struct hdmi_phy *phy,
  unsigned long int pixclock)
{
 /* De-serializer delay D/C for non-lbk mode: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG0,
         HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));

 if (pixclock == 27000000) {
  /* video_format == HDMI_VFRMT_720x480p60_16_9 */
  hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
          HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
          HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
 } else {
  hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG1,
          HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
          HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
 }

 /* No matter what, start from the power down mode: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_PD_PWRGEN |
         HDMI_8x60_PHY_REG2_PD_PLL |
         HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
         HDMI_8x60_PHY_REG2_PD_DESER);

 /* Turn PowerGen on: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_PD_PLL |
         HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
         HDMI_8x60_PHY_REG2_PD_DESER);

 /* Turn PLL power on: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
         HDMI_8x60_PHY_REG2_PD_DESER);

 /* Write to HIGH after PLL power down de-assert: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3,
         HDMI_8x60_PHY_REG3_PLL_ENABLE);

 /* ASIC power on; PHY REG9 = 0 */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);

 /* Enable PLL lock detect, PLL lock det will go high after lock
 * Enable the re-time logic
 */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
         HDMI_8x60_PHY_REG12_RETIMING_EN |
         HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN);

 /* Drivers are on: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_PD_DESER);

 /* If the RX detector is needed: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
         HDMI_8x60_PHY_REG2_PD_DESER);

 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG4, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG5, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG6, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG7, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG8, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG9, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG10, 0);
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG11, 0);

 /* If we want to use lock enable based on counting: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG12,
         HDMI_8x60_PHY_REG12_RETIMING_EN |
         HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN |
         HDMI_8x60_PHY_REG12_FORCE_LOCK);
}

static void hdmi_phy_8x60_powerdown(struct hdmi_phy *phy)
{
 /* Assert RESET PHY from controller */
 hdmi_phy_write(phy, REG_HDMI_PHY_CTRL,
         HDMI_PHY_CTRL_SW_RESET);
 udelay(10);
 /* De-assert RESET PHY from controller */
 hdmi_phy_write(phy, REG_HDMI_PHY_CTRL, 0);
 /* Turn off Driver */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
         HDMI_8x60_PHY_REG2_PD_DESER);
 udelay(10);
 /* Disable PLL */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG3, 0);
 /* Power down PHY, but keep RX-sense: */
 hdmi_phy_write(phy, REG_HDMI_8x60_PHY_REG2,
         HDMI_8x60_PHY_REG2_RCV_SENSE_EN |
         HDMI_8x60_PHY_REG2_PD_PWRGEN |
         HDMI_8x60_PHY_REG2_PD_PLL |
         HDMI_8x60_PHY_REG2_PD_DRIVE_4 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_3 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_2 |
         HDMI_8x60_PHY_REG2_PD_DRIVE_1 |
         HDMI_8x60_PHY_REG2_PD_DESER);
}

static const char * const hdmi_phy_8x60_reg_names[] = {
 "core-vdda",
};

static const char * const hdmi_phy_8x60_clk_names[] = {
 "slave_iface",
};

const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg = {
 .type = MSM_HDMI_PHY_8x60,
 .powerup = hdmi_phy_8x60_powerup,
 .powerdown = hdmi_phy_8x60_powerdown,
 .reg_names = hdmi_phy_8x60_reg_names,
 .num_regs = ARRAY_SIZE(hdmi_phy_8x60_reg_names),
 .clk_names = hdmi_phy_8x60_clk_names,
 .num_clks = ARRAY_SIZE(hdmi_phy_8x60_clk_names),
};