// SPDX-License-Identifier: GPL-2.0+
/*
* hdc2010.c - Support for the TI HDC2010 and HDC2080
* temperature + relative humidity sensors
*
* Copyright (C) 2020 Norphonic AS
* Author: Eugene Zaikonnikov <ez@norphonic.com>
*
* Datasheet: https://www.ti.com/product/HDC2010/datasheet
* Datasheet: https://www.ti.com/product/HDC2080/datasheet
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/bitops.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define HDC2010_REG_TEMP_LOW 0x00
#define HDC2010_REG_TEMP_HIGH 0x01
#define HDC2010_REG_HUMIDITY_LOW 0x02
#define HDC2010_REG_HUMIDITY_HIGH 0x03
#define HDC2010_REG_INTERRUPT_DRDY 0x04
#define HDC2010_REG_TEMP_MAX 0x05
#define HDC2010_REG_HUMIDITY_MAX 0x06
#define HDC2010_REG_INTERRUPT_EN 0x07
#define HDC2010_REG_TEMP_OFFSET_ADJ 0x08
#define HDC2010_REG_HUMIDITY_OFFSET_ADJ 0x09
#define HDC2010_REG_TEMP_THR_L 0x0a
#define HDC2010_REG_TEMP_THR_H 0x0b
#define HDC2010_REG_RH_THR_L 0x0c
#define HDC2010_REG_RH_THR_H 0x0d
#define HDC2010_REG_RESET_DRDY_INT_CONF 0x0e
#define HDC2010_REG_MEASUREMENT_CONF 0x0f
#define HDC2010_MEAS_CONF GENMASK(2, 1)
#define HDC2010_MEAS_TRIG BIT(0)
#define HDC2010_HEATER_EN BIT(3)
#define HDC2010_AMM GENMASK(6, 4)
struct hdc2010_data {
struct i2c_client *client;
struct mutex lock;
u8 measurement_config;
u8 interrupt_config;
u8 drdy_config;
};
enum hdc2010_addr_groups {
HDC2010_GROUP_TEMP = 0,
HDC2010_GROUP_HUMIDITY,
};
struct hdc2010_reg_record {
unsigned long primary;
unsigned long peak;
};
static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
[HDC2010_GROUP_TEMP] = {
.primary = HDC2010_REG_TEMP_LOW,
.peak = HDC2010_REG_TEMP_MAX,
},
[HDC2010_GROUP_HUMIDITY] = {
.primary = HDC2010_REG_HUMIDITY_LOW,
.peak = HDC2010_REG_HUMIDITY_MAX,
},
};
static IIO_CONST_ATTR(out_current_heater_raw_available,
"0 1");
static struct attribute *hdc2010_attributes[] = {
&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
NULL
};
static const struct attribute_group hdc2010_attribute_group = {
.attrs = hdc2010_attributes,
};
static const struct iio_chan_spec hdc2010_channels[] = {
{
.type = IIO_TEMP,
.address = HDC2010_GROUP_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_PEAK) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
},
{
.type = IIO_HUMIDITYRELATIVE,
.address = HDC2010_GROUP_HUMIDITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_PEAK) |
BIT(IIO_CHAN_INFO_SCALE),
},
{
.type = IIO_CURRENT,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.extend_name =
"heater",
.output = 1,
},
};
static int hdc2010_update_drdy_config(
struct hdc2010_data *data,
char mask,
char val)
{
u8 tmp = (~mask & data->drdy_config) | val;
int ret;
ret = i2c_smbus_write_byte_data(data->client,
HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
if (ret)
return ret;
data->drdy_config = tmp;
return 0;
}
static int hdc2010_get_prim_measurement_word(
struct hdc2010_data *data,
struct iio_chan_spec
const *chan)
{
struct i2c_client *client = data->client;
s32 ret;
ret = i2c_smbus_read_word_data(client,
hdc2010_reg_translation[chan->address].primary);
if (ret < 0)
dev_err(&client->dev,
"Could not read sensor measurement word\n");
return ret;
}
static int hdc2010_get_peak_measurement_byte(
struct hdc2010_data *data,
struct iio_chan_spec
const *chan)
{
struct i2c_client *client = data->client;
s32 ret;
ret = i2c_smbus_read_byte_data(client,
hdc2010_reg_translation[chan->address].peak);
if (ret < 0)
dev_err(&client->dev,
"Could not read sensor measurement byte\n");
return ret;
}
static int hdc2010_get_heater_status(
struct hdc2010_data *data)
{
return !!(data->drdy_config & HDC2010_HEATER_EN);
}
static int hdc2010_read_raw(
struct iio_dev *indio_dev,
struct iio_chan_spec
const *chan,
int *val,
int *val2,
long mask)
{
struct hdc2010_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW: {
int ret;
if (chan->type == IIO_CURRENT) {
*val = hdc2010_get_heater_status(data);
return IIO_VAL_INT;
}
if (!iio_device_claim_direct(indio_dev))
return -EBUSY;
mutex_lock(&data->lock);
ret = hdc2010_get_prim_measurement_word(data, chan);
mutex_unlock(&data->lock);
iio_device_release_direct(indio_dev);
if (ret < 0)
return ret;
*val = ret;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_PEAK: {
int ret;
if (!iio_device_claim_direct(indio_dev))
return -EBUSY;
mutex_lock(&data->lock);
ret = hdc2010_get_peak_measurement_byte(data, chan);
mutex_unlock(&data->lock);
iio_device_release_direct(indio_dev);
if (ret < 0)
return ret;
/* Scaling up the value so we can use same offset as RAW */
*val = ret * 256;
return IIO_VAL_INT;
}
case IIO_CHAN_INFO_SCALE:
*val2 = 65536;
if (chan->type == IIO_TEMP)
*val = 165000;
else
*val = 100000;
return IIO_VAL_FRACTIONAL;
case IIO_CHAN_INFO_OFFSET:
*val = -15887;
*val2 = 515151;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
}
static int hdc2010_write_raw(
struct iio_dev *indio_dev,
struct iio_chan_spec
const *chan,
int val,
int val2,
long mask)
{
struct hdc2010_data *data = iio_priv(indio_dev);
int new, ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type != IIO_CURRENT || val2 != 0)
return -EINVAL;
switch (val) {
case 1:
new = HDC2010_HEATER_EN;
break;
case 0:
new = 0;
break;
default:
return -EINVAL;
}
mutex_lock(&data->lock);
ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN,
new);
mutex_unlock(&data->lock);
return ret;
default:
return -EINVAL;
}
}
static const struct iio_info hdc2010_info = {
.read_raw = hdc2010_read_raw,
.write_raw = hdc2010_write_raw,
.attrs = &hdc2010_attribute_group,
};
static int hdc2010_probe(
struct i2c_client *client)
{
struct iio_dev *indio_dev;
struct hdc2010_data *data;
u8 tmp;
int ret;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev,
sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
data->client = client;
mutex_init(&data->lock);
/*
* As DEVICE ID register does not differentiate between
* HDC2010 and HDC2080, we have the name hardcoded
*/
indio_dev->name =
"hdc2010";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &hdc2010_info;
indio_dev->channels = hdc2010_channels;
indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);
/* Enable Automatic Measurement Mode at 5Hz */
ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
if (ret)
return ret;
/*
* We enable both temp and humidity measurement.
* However the measurement won't start even in AMM until triggered.
*/
tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) |
HDC2010_MEAS_TRIG;
ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp);
if (ret) {
dev_warn(&client->dev,
"Unable to set up measurement\n");
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
dev_warn(&client->dev,
"Unable to restore default AMM\n");
return ret;
}
data->measurement_config = tmp;
return iio_device_register(indio_dev);
}
static void hdc2010_remove(
struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
struct hdc2010_data *data = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
/* Disable Automatic Measurement Mode */
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
dev_warn(&client->dev,
"Unable to restore default AMM\n");
}
static const struct i2c_device_id hdc2010_id[] = {
{
"hdc2010" },
{
"hdc2080" },
{ }
};
MODULE_DEVICE_TABLE(i2c, hdc2010_id);
static const struct of_device_id hdc2010_dt_ids[] = {
{ .compatible =
"ti,hdc2010" },
{ .compatible =
"ti,hdc2080" },
{ }
};
MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);
static struct i2c_driver hdc2010_driver = {
.driver = {
.name =
"hdc2010",
.of_match_table = hdc2010_dt_ids,
},
.probe = hdc2010_probe,
.remove = hdc2010_remove,
.id_table = hdc2010_id,
};
module_i2c_driver(hdc2010_driver);
MODULE_AUTHOR(
"Eugene Zaikonnikov ");
MODULE_DESCRIPTION(
"TI HDC2010 humidity and temperature sensor driver");
MODULE_LICENSE(
"GPL");
