# SPDX-License-Identifier: GPL-2.0-only
#
# 8390 device configuration
#
config NET_VENDOR_8390
bool
"National Semiconductor 8390 devices"
default y
depends on NET_VENDOR_NATSEMI
help
If you have a network (Ethernet) card belonging to
this class, say Y.
Note that the answer to
this question doesn
't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about National Semiconductor 8390 cards.
If you say Y,
you will be asked
for your specific card in the following questions.
if NET_VENDOR_8390
config PCMCIA_AXNET
tristate
"Asix AX88190 PCMCIA support"
depends on PCMCIA && HAS_IOPORT
help
Say Y here
if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
nearly NE2000 compatible but need a separate driver due to a few
misfeatures.
To compile
this driver as a module, choose M here: the module will be
called axnet_cs.
If unsure, say N.
config AX88796
tristate
"ASIX AX88796 NE2000 clone support" if !ZORRO
depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
select CRC32
select PHYLIB
select MDIO_BITBANG
help
AX88796 driver, using platform bus to provide
chip detection
and resources
config AX88796_93CX6
bool
"ASIX AX88796 external 93CX6 eeprom support"
depends on AX88796
select EEPROM_93CX6
help
Select
this if your platform comes with an external 93CX6 eeprom.
config XSURF100
tristate
"Amiga XSurf 100 AX88796/NE2000 clone support"
depends on ZORRO
select AX88796
select AX88796B_PHY
help
This driver is
for the Individual Computers X-Surf 100 Ethernet
card (based on the Asix AX88796 chip).
If you have such a card,
say Y. Otherwise, say N.
To compile
this driver as a module, choose M here: the module
will be called xsurf100.
config HYDRA
tristate
"Hydra support"
depends on ZORRO
select CRC32
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile
this driver as a module, choose M here: the module
will be called hydra.
config ARM_ETHERH
tristate
"I-cubed EtherH/ANT EtherM support"
depends on ARM && ARCH_ACORN
select CRC32
help
If you have an Acorn system with one of these network cards, you
should say Y to
this option if you wish to use it with Linux.
config MAC8390
tristate
"Macintosh NS 8390 based ethernet cards"
depends on MAC
select CRC32
help
If you want to
include a driver to support Nubus
or LC-PDS
Ethernet cards using an NS8390 chipset
or its equivalent, say Y.
config MCF8390
tristate
"ColdFire NS8390 based Ethernet support"
depends on COLDFIRE
select CRC32
help
This driver is
for Ethernet devices using an NS8390-compatible
chipset on many common ColdFire
CPU based boards. Many of the older
Freescale dev boards use
this,
and some other common boards like
some SnapGear routers do as well.
If you have one of these boards
and want to use the network
interface
on them then choose Y. To compile
this driver as a module, choose M
here, the module will be called mcf8390.
config NE2000
tristate
"NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
select NETDEV_LEGACY_INIT
if ISA
select CRC32
help
If you have a network (Ethernet) card of
this type, say Y here.
Many Ethernet cards without a specific driver are compatible with
the NE2000.
If you have a PCI NE2000 card however, say N here
and Y to
"PCI
NE2000
and clone support
" below.
To compile
this driver as a module, choose M here. The module
will be called
ne.
config NE2K_PCI
tristate
"PCI NE2000 and clones support (see help)"
depends on PCI && HAS_IOPORT
select CRC32
help
This driver is
for NE2000 compatible PCI cards. It will not work
with ISA NE2000 cards (they have their own driver,
"NE2000/NE1000
support
" below). If you have a PCI NE2000 network (Ethernet) card,
say Y here.
This driver also works
for the following NE2000 clone cards:
RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
To compile
this driver as a module, choose M here. The module
will be called ne2k-pci.
config APNE
tristate
"PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
select CRC32
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile
this driver as a module, choose M here: the module
will be called apne.
config PCMCIA_PCNET
tristate
"NE2000 compatible PCMCIA support"
depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here
if you intend to attach an NE2000 compatible PCMCIA
(PC-card) Ethernet
or Fast Ethernet card to your computer.
To compile
this driver as a module, choose M here: the module will be
called pcnet_cs.
If unsure, say N.
config STNIC
tristate
"National DP83902AV support"
depends on SUPERH
select CRC32
help
Support
for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network
Interface Controller
for Twisted Pair.
This
is a 10Mbit/sec Ethernet controller. Product overview
and specs at
<
http://www.national.com/pf/DP/DP83902A.html>.
If unsure, say N.
config ULTRA
tristate
"SMC Ultra support"
depends on ISA
select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of
this type, say Y here.
Important: There have been many reports that, with some motherboards
mixing an SMC Ultra
and an Adaptec AHA154x SCSI card (
or compatible,
such as some BusLogic models) causes corruption problems with many
operating systems. The Linux smc-ultra driver has a work-around
for
this but keep it in mind
if you have such a SCSI card
and have
problems.
To compile
this driver as a module, choose M here. The module
will be called smc-ultra.
config WD80x3
tristate
"WD80*3 support"
depends on ISA
select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of
this type, say Y here.
To compile
this driver as a module, choose M here. The module
will be called wd.
config ZORRO8390
tristate
"Zorro NS8390-based Ethernet support"
depends on ZORRO
select CRC32
help
This driver is
for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II
and the Individual
Computers X-Surf Ethernet cards.
If you have such a card, say Y.
Otherwise, say N.
To compile
this driver as a module, choose M here: the module
will be called zorro8390.
endif # NET_VENDOR_8390
