Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/net/ethernet/engleder/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 11 kB image not shown  

SSL tsnep_tc.c   Interaktion und
PortierbarkeitC

 
// SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */

#include "tsnep.h"

#include <net/pkt_sched.h>

/* save one operation at the end for additional operation at list change */
#define TSNEP_MAX_GCL_NUM (TSNEP_GCL_COUNT - 1)

static int tsnep_validate_gcl(struct tc_taprio_qopt_offload *qopt)
{
 int i;
 u64 cycle_time;

 if (!qopt->cycle_time)
  return -ERANGE;
 if (qopt->num_entries > TSNEP_MAX_GCL_NUM)
  return -EINVAL;
 cycle_time = 0;
 for (i = 0; i < qopt->num_entries; i++) {
  if (qopt->entries[i].command != TC_TAPRIO_CMD_SET_GATES)
   return -EINVAL;
  if (qopt->entries[i].gate_mask & ~TSNEP_GCL_MASK)
   return -EINVAL;
  if (qopt->entries[i].interval < TSNEP_GCL_MIN_INTERVAL)
   return -EINVAL;
  cycle_time += qopt->entries[i].interval;
 }
 if (qopt->cycle_time != cycle_time)
  return -EINVAL;
 if (qopt->cycle_time_extension >= qopt->cycle_time)
  return -EINVAL;

 return 0;
}

static void tsnep_write_gcl_operation(struct tsnep_gcl *gcl, int index,
          u32 properties, u32 interval, bool flush)
{
 void __iomem *addr = gcl->addr +
        sizeof(struct tsnep_gcl_operation) * index;

 gcl->operation[index].properties = properties;
 gcl->operation[index].interval = interval;

 iowrite32(properties, addr);
 iowrite32(interval, addr + sizeof(u32));

 if (flush) {
  /* flush write with read access */
  ioread32(addr);
 }
}

static u64 tsnep_change_duration(struct tsnep_gcl *gcl, int index)
{
 u64 duration;
 int count;

 /* change needs to be triggered one or two operations before start of
 * new gate control list
 * - change is triggered at start of operation (minimum one operation)
 * - operation with adjusted interval is inserted on demand to exactly
 *   meet the start of the new gate control list (optional)
 *
 * additionally properties are read directly after start of previous
 * operation
 *
 * therefore, three operations needs to be considered for the limit
 */

 duration = 0;
 count = 3;
 while (count) {
  duration += gcl->operation[index].interval;

  index--;
  if (index < 0)
   index = gcl->count - 1;

  count--;
 }

 return duration;
}

static void tsnep_write_gcl(struct tsnep_gcl *gcl,
       struct tc_taprio_qopt_offload *qopt)
{
 int i;
 u32 properties;
 u64 extend;
 u64 cut;

 gcl->base_time = ktime_to_ns(qopt->base_time);
 gcl->cycle_time = qopt->cycle_time;
 gcl->cycle_time_extension = qopt->cycle_time_extension;

 for (i = 0; i < qopt->num_entries; i++) {
  properties = qopt->entries[i].gate_mask;
  if (i == (qopt->num_entries - 1))
   properties |= TSNEP_GCL_LAST;

  tsnep_write_gcl_operation(gcl, i, properties,
       qopt->entries[i].interval, true);
 }
 gcl->count = qopt->num_entries;

 /* calculate change limit; i.e., the time needed between enable and
 * start of new gate control list
 */


 /* case 1: extend cycle time for change
 * - change duration of last operation
 * - cycle time extension
 */

 extend = tsnep_change_duration(gcl, gcl->count - 1);
 extend += gcl->cycle_time_extension;

 /* case 2: cut cycle time for change
 * - maximum change duration
 */

 cut = 0;
 for (i = 0; i < gcl->count; i++)
  cut = max(cut, tsnep_change_duration(gcl, i));

 /* use maximum, because the actual case (extend or cut) can be
 * determined only after limit is known (chicken-and-egg problem)
 */

 gcl->change_limit = max(extend, cut);
}

static u64 tsnep_gcl_start_after(struct tsnep_gcl *gcl, u64 limit)
{
 u64 start = gcl->base_time;
 u64 n;

 if (start <= limit) {
  n = div64_u64(limit - start, gcl->cycle_time);
  start += (n + 1) * gcl->cycle_time;
 }

 return start;
}

static u64 tsnep_gcl_start_before(struct tsnep_gcl *gcl, u64 limit)
{
 u64 start = gcl->base_time;
 u64 n;

 n = div64_u64(limit - start, gcl->cycle_time);
 start += n * gcl->cycle_time;
 if (start == limit)
  start -= gcl->cycle_time;

 return start;
}

static u64 tsnep_set_gcl_change(struct tsnep_gcl *gcl, int index, u64 change,
    bool insert)
{
 /* previous operation triggers change and properties are evaluated at
 * start of operation
 */

 if (index == 0)
  index = gcl->count - 1;
 else
  index = index - 1;
 change -= gcl->operation[index].interval;

 /* optionally change to new list with additional operation in between */
 if (insert) {
  void __iomem *addr = gcl->addr +
         sizeof(struct tsnep_gcl_operation) * index;

  gcl->operation[index].properties |= TSNEP_GCL_INSERT;
  iowrite32(gcl->operation[index].properties, addr);
 }

 return change;
}

static void tsnep_clean_gcl(struct tsnep_gcl *gcl)
{
 int i;
 u32 mask = TSNEP_GCL_LAST | TSNEP_GCL_MASK;
 void __iomem *addr;

 /* search for insert operation and reset properties */
 for (i = 0; i < gcl->count; i++) {
  if (gcl->operation[i].properties & ~mask) {
   addr = gcl->addr +
          sizeof(struct tsnep_gcl_operation) * i;

   gcl->operation[i].properties &= mask;
   iowrite32(gcl->operation[i].properties, addr);

   break;
  }
 }
}

static u64 tsnep_insert_gcl_operation(struct tsnep_gcl *gcl, int ref,
          u64 change, u32 interval)
{
 u32 properties;

 properties = gcl->operation[ref].properties & TSNEP_GCL_MASK;
 /* change to new list directly after inserted operation */
 properties |= TSNEP_GCL_CHANGE;

 /* last operation of list is reserved to insert operation */
 tsnep_write_gcl_operation(gcl, TSNEP_GCL_COUNT - 1, properties,
      interval, false);

 return tsnep_set_gcl_change(gcl, ref, change, true);
}

static u64 tsnep_extend_gcl(struct tsnep_gcl *gcl, u64 start, u32 extension)
{
 int ref = gcl->count - 1;
 u32 interval = gcl->operation[ref].interval + extension;

 start -= gcl->operation[ref].interval;

 return tsnep_insert_gcl_operation(gcl, ref, start, interval);
}

static u64 tsnep_cut_gcl(struct tsnep_gcl *gcl, u64 start, u64 cycle_time)
{
 u64 sum = 0;
 int i;

 /* find operation which shall be cutted */
 for (i = 0; i < gcl->count; i++) {
  u64 sum_tmp = sum + gcl->operation[i].interval;
  u64 interval;

  /* sum up operations as long as cycle time is not exceeded */
  if (sum_tmp > cycle_time)
   break;

  /* remaining interval must be big enough for hardware */
  interval = cycle_time - sum_tmp;
  if (interval > 0 && interval < TSNEP_GCL_MIN_INTERVAL)
   break;

  sum = sum_tmp;
 }
 if (sum == cycle_time) {
  /* no need to cut operation itself or whole cycle
 * => change exactly at operation
 */

  return tsnep_set_gcl_change(gcl, i, start + sum, false);
 }
 return tsnep_insert_gcl_operation(gcl, i, start + sum,
       cycle_time - sum);
}

static int tsnep_enable_gcl(struct tsnep_adapter *adapter,
       struct tsnep_gcl *gcl, struct tsnep_gcl *curr)
{
 u64 system_time;
 u64 timeout;
 u64 limit;

 /* estimate timeout limit after timeout enable, actually timeout limit
 * in hardware will be earlier than estimate so we are on the safe side
 */

 tsnep_get_system_time(adapter, &system_time);
 timeout = system_time + TSNEP_GC_TIMEOUT;

 if (curr)
  limit = timeout + curr->change_limit;
 else
  limit = timeout;

 gcl->start_time = tsnep_gcl_start_after(gcl, limit);

 /* gate control time register is only 32bit => time shall be in the near
 * future (no driver support for far future implemented)
 */

 if ((gcl->start_time - system_time) >= U32_MAX)
  return -EAGAIN;

 if (curr) {
  /* change gate control list */
  u64 last;
  u64 change;

  last = tsnep_gcl_start_before(curr, gcl->start_time);
  if ((last + curr->cycle_time) == gcl->start_time)
   change = tsnep_cut_gcl(curr, last,
            gcl->start_time - last);
  else if (((gcl->start_time - last) <=
     curr->cycle_time_extension) ||
    ((gcl->start_time - last) <= TSNEP_GCL_MIN_INTERVAL))
   change = tsnep_extend_gcl(curr, last,
        gcl->start_time - last);
  else
   change = tsnep_cut_gcl(curr, last,
            gcl->start_time - last);

  WARN_ON(change <= timeout);
  gcl->change = true;
  iowrite32(change & 0xFFFFFFFF, adapter->addr + TSNEP_GC_CHANGE);
 } else {
  /* start gate control list */
  WARN_ON(gcl->start_time <= timeout);
  gcl->change = false;
  iowrite32(gcl->start_time & 0xFFFFFFFF,
     adapter->addr + TSNEP_GC_TIME);
 }

 return 0;
}

static int tsnep_taprio(struct tsnep_adapter *adapter,
   struct tc_taprio_qopt_offload *qopt)
{
 struct tsnep_gcl *gcl;
 struct tsnep_gcl *curr;
 int retval;

 if (!adapter->gate_control)
  return -EOPNOTSUPP;

 if (qopt->cmd == TAPRIO_CMD_DESTROY) {
  /* disable gate control if active */
  mutex_lock(&adapter->gate_control_lock);

  if (adapter->gate_control_active) {
   iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC);
   adapter->gate_control_active = false;
  }

  mutex_unlock(&adapter->gate_control_lock);

  return 0;
 } else if (qopt->cmd != TAPRIO_CMD_REPLACE) {
  return -EOPNOTSUPP;
 }

 retval = tsnep_validate_gcl(qopt);
 if (retval)
  return retval;

 mutex_lock(&adapter->gate_control_lock);

 gcl = &adapter->gcl[adapter->next_gcl];
 tsnep_write_gcl(gcl, qopt);

 /* select current gate control list if active */
 if (adapter->gate_control_active) {
  if (adapter->next_gcl == 0)
   curr = &adapter->gcl[1];
  else
   curr = &adapter->gcl[0];
 } else {
  curr = NULL;
 }

 for (;;) {
  /* start timeout which discards late enable, this helps ensuring
 * that start/change time are in the future at enable
 */

  iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC);

  retval = tsnep_enable_gcl(adapter, gcl, curr);
  if (retval) {
   mutex_unlock(&adapter->gate_control_lock);

   return retval;
  }

  /* enable gate control list */
  if (adapter->next_gcl == 0)
   iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC);
  else
   iowrite8(TSNEP_GC_ENABLE_B, adapter->addr + TSNEP_GC);

  /* done if timeout did not happen */
  if (!(ioread32(adapter->addr + TSNEP_GC) &
        TSNEP_GC_TIMEOUT_SIGNAL))
   break;

  /* timeout is acknowledged with any enable */
  iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC);

  if (curr)
   tsnep_clean_gcl(curr);

  /* retry because of timeout */
 }

 adapter->gate_control_active = true;

 if (adapter->next_gcl == 0)
  adapter->next_gcl = 1;
 else
  adapter->next_gcl = 0;

 mutex_unlock(&adapter->gate_control_lock);

 return 0;
}

static int tsnep_tc_query_caps(struct tsnep_adapter *adapter,
          struct tc_query_caps_base *base)
{
 switch (base->type) {
 case TC_SETUP_QDISC_TAPRIO: {
  struct tc_taprio_caps *caps = base->caps;

  if (!adapter->gate_control)
   return -EOPNOTSUPP;

  caps->gate_mask_per_txq = true;

  return 0;
 }
 default:
  return -EOPNOTSUPP;
 }
}

int tsnep_tc_setup(struct net_device *netdev, enum tc_setup_type type,
     void *type_data)
{
 struct tsnep_adapter *adapter = netdev_priv(netdev);

 switch (type) {
 case TC_QUERY_CAPS:
  return tsnep_tc_query_caps(adapter, type_data);
 case TC_SETUP_QDISC_TAPRIO:
  return tsnep_taprio(adapter, type_data);
 default:
  return -EOPNOTSUPP;
 }
}

int tsnep_tc_init(struct tsnep_adapter *adapter)
{
 if (!adapter->gate_control)
  return 0;

 /* open all gates */
 iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC);
 iowrite32(TSNEP_GC_OPEN | TSNEP_GC_NEXT_OPEN, adapter->addr + TSNEP_GC);

 adapter->gcl[0].addr = adapter->addr + TSNEP_GCL_A;
 adapter->gcl[1].addr = adapter->addr + TSNEP_GCL_B;

 return 0;
}

void tsnep_tc_cleanup(struct tsnep_adapter *adapter)
{
 if (!adapter->gate_control)
  return;

 if (adapter->gate_control_active) {
  iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC);
  adapter->gate_control_active = false;
 }
}

Messung V0.5
C=94 H=93 G=93

¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.6Angebot  ¤

*Eine klare Vorstellung vom Zielzustand






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.