/* List of keyfields with description * * Keys ending in _IS are booleans derived from frame data * Keys ending in _CLS are classified frame data * * VCAP_KF_8021BR_ECID_BASE: W12, sparx5: is0 * Used by 802.1BR Bridge Port Extension in an E-Tag * VCAP_KF_8021BR_ECID_EXT: W8, sparx5: is0 * Used by 802.1BR Bridge Port Extension in an E-Tag * VCAP_KF_8021BR_E_TAGGED: W1, sparx5: is0 * Set for frames containing an E-TAG (802.1BR Ethertype 893f) * VCAP_KF_8021BR_GRP: W2, sparx5: is0 * E-Tag group bits in 802.1BR Bridge Port Extension * VCAP_KF_8021BR_IGR_ECID_BASE: W12, sparx5: is0 * Used by 802.1BR Bridge Port Extension in an E-Tag * VCAP_KF_8021BR_IGR_ECID_EXT: W8, sparx5: is0 * Used by 802.1BR Bridge Port Extension in an E-Tag * VCAP_KF_8021CB_R_TAGGED_IS: W1, lan966x: is1 * Set if frame contains an RTAG: IEEE 802.1CB (FRER Redundancy tag, Ethertype * 0xf1c1) * VCAP_KF_8021Q_DEI0: W1, sparx5: is0, lan966x: is1 * First DEI in multiple vlan tags (outer tag or default port tag) * VCAP_KF_8021Q_DEI1: W1, sparx5: is0, lan966x: is1 * Second DEI in multiple vlan tags (inner tag) * VCAP_KF_8021Q_DEI2: W1, sparx5: is0 * Third DEI in multiple vlan tags (not always available) * VCAP_KF_8021Q_DEI_CLS: W1, sparx5: is2/es2, lan966x: is2/es0 * Classified DEI * VCAP_KF_8021Q_PCP0: W3, sparx5: is0, lan966x: is1 * First PCP in multiple vlan tags (outer tag or default port tag) * VCAP_KF_8021Q_PCP1: W3, sparx5: is0, lan966x: is1 * Second PCP in multiple vlan tags (inner tag) * VCAP_KF_8021Q_PCP2: W3, sparx5: is0 * Third PCP in multiple vlan tags (not always available) * VCAP_KF_8021Q_PCP_CLS: W3, sparx5: is2/es2, lan966x: is2/es0 * Classified PCP * VCAP_KF_8021Q_TPID: W3, sparx5: es0 * TPID for outer tag: 0: Customer TPID 1: Service TPID (88A8 or programmable) * VCAP_KF_8021Q_TPID0: sparx5 is0 W3, lan966x is1 W1 * First TPIC in multiple vlan tags (outer tag or default port tag) * VCAP_KF_8021Q_TPID1: sparx5 is0 W3, lan966x is1 W1 * Second TPID in multiple vlan tags (inner tag) * VCAP_KF_8021Q_TPID2: W3, sparx5: is0 * Third TPID in multiple vlan tags (not always available) * VCAP_KF_8021Q_VID0: W12, sparx5: is0, lan966x: is1 * First VID in multiple vlan tags (outer tag or default port tag) * VCAP_KF_8021Q_VID1: W12, sparx5: is0, lan966x: is1 * Second VID in multiple vlan tags (inner tag) * VCAP_KF_8021Q_VID2: W12, sparx5: is0 * Third VID in multiple vlan tags (not always available) * VCAP_KF_8021Q_VID_CLS: sparx5 is2 W13, sparx5 es0 W13, sparx5 es2 W13, * lan966x is2 W12, lan966x es0 W12 * Classified VID * VCAP_KF_8021Q_VLAN_DBL_TAGGED_IS: W1, lan966x: is1 * Set if frame has two or more Q-tags. Independent of port VLAN awareness * VCAP_KF_8021Q_VLAN_TAGGED_IS: W1, sparx5: is2/es2, lan966x: is1/is2 * Sparx5: Set if frame was received with a VLAN tag, LAN966x: Set if frame has * one or more Q-tags. Independent of port VLAN awareness * VCAP_KF_8021Q_VLAN_TAGS: W3, sparx5: is0 * Number of VLAN tags in frame: 0: Untagged, 1: Single tagged, 3: Double * tagged, 7: Triple tagged * VCAP_KF_ACL_GRP_ID: W8, sparx5: es2 * Used in interface map table * VCAP_KF_ARP_ADDR_SPACE_OK_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if hardware address is Ethernet * VCAP_KF_ARP_LEN_OK_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if hardware address length = 6 (Ethernet) and IP address length = 4 (IP). * VCAP_KF_ARP_OPCODE: W2, sparx5: is2/es2, lan966x: is2 * ARP opcode * VCAP_KF_ARP_OPCODE_UNKNOWN_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if not one of the codes defined in VCAP_KF_ARP_OPCODE * VCAP_KF_ARP_PROTO_SPACE_OK_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if protocol address space is 0x0800 * VCAP_KF_ARP_SENDER_MATCH_IS: W1, sparx5: is2/es2, lan966x: is2 * Sender Hardware Address = SMAC (ARP) * VCAP_KF_ARP_TGT_MATCH_IS: W1, sparx5: is2/es2, lan966x: is2 * Target Hardware Address = SMAC (RARP) * VCAP_KF_COSID_CLS: W3, sparx5: es0/es2 * Class of service * VCAP_KF_ES0_ISDX_KEY_ENA: W1, sparx5: es2 * The value taken from the IFH .FWD.ES0_ISDX_KEY_ENA * VCAP_KF_ETYPE: W16, sparx5: is0/is2/es2, lan966x: is1/is2 * Ethernet type * VCAP_KF_ETYPE_LEN_IS: W1, sparx5: is0/is2/es2, lan966x: is1 * Set if frame has EtherType >= 0x600 * VCAP_KF_HOST_MATCH: W1, lan966x: is2 * The action from the SMAC_SIP4 or SMAC_SIP6 lookups. Used for IP source * guarding. * VCAP_KF_IF_EGR_PORT_MASK: W32, sparx5: es2 * Egress port mask, one bit per port * VCAP_KF_IF_EGR_PORT_MASK_RNG: W3, sparx5: es2 * Select which 32 port group is available in IF_EGR_PORT (or virtual ports or * CPU queue) * VCAP_KF_IF_EGR_PORT_NO: sparx5 es0 W7, lan966x es0 W4 * Egress port number * VCAP_KF_IF_IGR_PORT: sparx5 is0 W7, sparx5 es2 W9, lan966x is1 W3, lan966x * is2 W4, lan966x es0 W4 * Sparx5: Logical ingress port number retrieved from * ANA_CL::PORT_ID_CFG.LPORT_NUM or ERLEG, LAN966x: ingress port nunmber * VCAP_KF_IF_IGR_PORT_MASK: sparx5 is0 W65, sparx5 is2 W32, sparx5 is2 W65, * lan966x is1 W9, lan966x is2 W9 * Ingress port mask, one bit per port/erleg * VCAP_KF_IF_IGR_PORT_MASK_L3: W1, sparx5: is2 * If set, IF_IGR_PORT_MASK, IF_IGR_PORT_MASK_RNG, and IF_IGR_PORT_MASK_SEL are * used to specify L3 interfaces * VCAP_KF_IF_IGR_PORT_MASK_RNG: W4, sparx5: is2 * Range selector for IF_IGR_PORT_MASK. Specifies which group of 32 ports are * available in IF_IGR_PORT_MASK * VCAP_KF_IF_IGR_PORT_MASK_SEL: W2, sparx5: is0/is2 * Mode selector for IF_IGR_PORT_MASK, applicable when IF_IGR_PORT_MASK_L3 == 0. * Mapping: 0: DEFAULT 1: LOOPBACK 2: MASQUERADE 3: CPU_VD * VCAP_KF_IF_IGR_PORT_SEL: W1, sparx5: es2 * Selector for IF_IGR_PORT: physical port number or ERLEG * VCAP_KF_IP4_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2 * Set if frame has EtherType = 0x800 and IP version = 4 * VCAP_KF_IP_MC_IS: W1, sparx5: is0, lan966x: is1 * Set if frame is IPv4 frame and frame's destination MAC address is an IPv4 * multicast address (0x01005E0 /25). Set if frame is IPv6 frame and frame's * destination MAC address is an IPv6 multicast address (0x3333/16). * VCAP_KF_IP_PAYLOAD_5TUPLE: W32, sparx5: is0, lan966x: is1 * Payload bytes after IP header * VCAP_KF_IP_PAYLOAD_S1_IP6: W112, lan966x: is1 * Payload after IPv6 header * VCAP_KF_IP_SNAP_IS: W1, sparx5: is0, lan966x: is1 * Set if frame is IPv4, IPv6, or SNAP frame * VCAP_KF_ISDX_CLS: sparx5 is2 W12, sparx5 es0 W12, sparx5 es2 W12, lan966x es0 * W8 * Classified ISDX * VCAP_KF_ISDX_GT0_IS: W1, sparx5: is2/es0/es2, lan966x: is2/es0 * Set if classified ISDX > 0 * VCAP_KF_L2_BC_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2/es0 * Set if frame's destination MAC address is the broadcast address * (FF-FF-FF-FF-FF-FF). * VCAP_KF_L2_DMAC: W48, sparx5: is0/is2/es2, lan966x: is1/is2 * Destination MAC address * VCAP_KF_L2_FRM_TYPE: W4, lan966x: is2 * Frame subtype for specific EtherTypes (MRP, DLR) * VCAP_KF_L2_FWD_IS: W1, sparx5: is2 * Set if the frame is allowed to be forwarded to front ports * VCAP_KF_L2_LLC: W40, lan966x: is2 * LLC header and data after up to two VLAN tags and the type/length field * VCAP_KF_L2_MAC: W48, lan966x: is1 * MAC address (FIRST=1: SMAC, FIRST=0: DMAC) * VCAP_KF_L2_MC_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2/es0 * Set if frame's destination MAC address is a multicast address (bit 40 = 1). * VCAP_KF_L2_PAYLOAD0: W16, lan966x: is2 * Payload bytes 0-1 after the frame's EtherType * VCAP_KF_L2_PAYLOAD1: W8, lan966x: is2 * Payload byte 4 after the frame's EtherType. This is specifically for PTP * frames. * VCAP_KF_L2_PAYLOAD2: W3, lan966x: is2 * Bits 7, 2, and 1 from payload byte 6 after the frame's EtherType. This is * specifically for PTP frames. * VCAP_KF_L2_PAYLOAD_ETYPE: W64, sparx5: is2/es2 * Byte 0-7 of L2 payload after Type/Len field and overloading for OAM * VCAP_KF_L2_SMAC: W48, sparx5: is0/is2/es2, lan966x: is1/is2 * Source MAC address * VCAP_KF_L2_SNAP: W40, lan966x: is2 * SNAP header after LLC header (AA-AA-03) * VCAP_KF_L3_DIP_EQ_SIP_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if Src IP matches Dst IP address * VCAP_KF_L3_DPL_CLS: W1, sparx5: es0/es2, lan966x: es0 * The frames drop precedence level * VCAP_KF_L3_DSCP: W6, sparx5: is0, lan966x: is1 * Frame's DSCP value * VCAP_KF_L3_DST_IS: W1, sparx5: is2 * Set if lookup is done for egress router leg * VCAP_KF_L3_FRAGMENT: W1, lan966x: is1/is2 * Set if IPv4 frame is fragmented * VCAP_KF_L3_FRAGMENT_TYPE: W2, sparx5: is0/is2/es2 * L3 Fragmentation type (none, initial, suspicious, valid follow up) * VCAP_KF_L3_FRAG_INVLD_L4_LEN: W1, sparx5: is0/is2 * Set if frame's L4 length is less than ANA_CL:COMMON:CLM_FRAGMENT_CFG.L4_MIN_L * EN * VCAP_KF_L3_FRAG_OFS_GT0: W1, lan966x: is1/is2 * Set if IPv4 frame is fragmented and it is not the first fragment * VCAP_KF_L3_IP4_DIP: W32, sparx5: is0/is2/es2, lan966x: is1/is2 * Destination IPv4 Address * VCAP_KF_L3_IP4_SIP: W32, sparx5: is0/is2/es2, lan966x: is1/is2 * Source IPv4 Address * VCAP_KF_L3_IP6_DIP: sparx5 is0 W128, sparx5 is2 W128, sparx5 es2 W128, * lan966x is1 W64, lan966x is1 W128, lan966x is2 W128 * Sparx5: Full IPv6 DIP, LAN966x: Either Full IPv6 DIP or a subset depending on * frame type * VCAP_KF_L3_IP6_DIP_MSB: W16, lan966x: is1 * MS 16bits of IPv6 DIP * VCAP_KF_L3_IP6_SIP: sparx5 is0 W128, sparx5 is2 W128, sparx5 es2 W128, * lan966x is1 W128, lan966x is1 W64, lan966x is2 W128 * Sparx5: Full IPv6 SIP, LAN966x: Either Full IPv6 SIP or a subset depending on * frame type * VCAP_KF_L3_IP6_SIP_MSB: W16, lan966x: is1 * MS 16bits of IPv6 DIP * VCAP_KF_L3_IP_PROTO: W8, sparx5: is0/is2/es2, lan966x: is1/is2 * IPv4 frames: IP protocol. IPv6 frames: Next header, same as for IPV4 * VCAP_KF_L3_OPTIONS_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2 * Set if IPv4 frame contains options (IP len > 5) * VCAP_KF_L3_PAYLOAD: sparx5 is2 W96, sparx5 is2 W40, sparx5 es2 W96, sparx5 * es2 W40, lan966x is2 W56 * Sparx5: Payload bytes after IP header. IPv4: IPv4 options are not parsed so * payload is always taken 20 bytes after the start of the IPv4 header, LAN966x: * Bytes 0-6 after IP header * VCAP_KF_L3_RT_IS: W1, sparx5: is2/es2 * Set if frame has hit a router leg * VCAP_KF_L3_TOS: W8, sparx5: is2/es2, lan966x: is2 * Sparx5: Frame's IPv4/IPv6 DSCP and ECN fields, LAN966x: IP TOS field * VCAP_KF_L3_TTL_GT0: W1, sparx5: is2/es2, lan966x: is2 * Set if IPv4 TTL / IPv6 hop limit is greater than 0 * VCAP_KF_L4_1588_DOM: W8, lan966x: is2 * PTP over UDP: domainNumber * VCAP_KF_L4_1588_VER: W4, lan966x: is2 * PTP over UDP: version * VCAP_KF_L4_ACK: W1, sparx5: is2/es2, lan966x: is2 * Sparx5 and LAN966x: TCP flag ACK, LAN966x only: PTP over UDP: flagField bit 2 * (unicastFlag) * VCAP_KF_L4_DPORT: W16, sparx5: is2/es2, lan966x: is2 * Sparx5: TCP/UDP destination port. Overloading for IP_7TUPLE: Non-TCP/UDP IP * frames: L4_DPORT = L3_IP_PROTO, LAN966x: TCP/UDP destination port * VCAP_KF_L4_FIN: W1, sparx5: is2/es2, lan966x: is2 * TCP flag FIN, LAN966x: TCP flag FIN, and for PTP over UDP: messageType bit 1 * VCAP_KF_L4_PAYLOAD: W64, sparx5: is2/es2 * Payload bytes after TCP/UDP header Overloading for IP_7TUPLE: Non TCP/UDP * frames: Payload bytes 0-7 after IP header. IPv4 options are not parsed so * payload is always taken 20 bytes after the start of the IPv4 header for non * TCP/UDP IPv4 frames * VCAP_KF_L4_PSH: W1, sparx5: is2/es2, lan966x: is2 * Sparx5: TCP flag PSH, LAN966x: TCP: TCP flag PSH. PTP over UDP: flagField bit * 1 (twoStepFlag) * VCAP_KF_L4_RNG: sparx5 is0 W8, sparx5 is2 W16, sparx5 es2 W16, lan966x is1 * W8, lan966x is2 W8 * Range checker bitmask (one for each range checker). Input into range checkers * is taken from classified results (VID, DSCP) and frame (SPORT, DPORT, ETYPE, * outer VID, inner VID) * VCAP_KF_L4_RST: W1, sparx5: is2/es2, lan966x: is2 * Sparx5: TCP flag RST , LAN966x: TCP: TCP flag RST. PTP over UDP: messageType * bit 3 * VCAP_KF_L4_SEQUENCE_EQ0_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if TCP sequence number is 0, LAN966x: Overlaid with PTP over UDP: * messageType bit 0 * VCAP_KF_L4_SPORT: W16, sparx5: is0/is2/es2, lan966x: is1/is2 * TCP/UDP source port * VCAP_KF_L4_SPORT_EQ_DPORT_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if UDP or TCP source port equals UDP or TCP destination port * VCAP_KF_L4_SYN: W1, sparx5: is2/es2, lan966x: is2 * Sparx5: TCP flag SYN, LAN966x: TCP: TCP flag SYN. PTP over UDP: messageType * bit 2 * VCAP_KF_L4_URG: W1, sparx5: is2/es2, lan966x: is2 * Sparx5: TCP flag URG, LAN966x: TCP: TCP flag URG. PTP over UDP: flagField bit * 7 (reserved) * VCAP_KF_LOOKUP_FIRST_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2 * Selects between entries relevant for first and second lookup. Set for first * lookup, cleared for second lookup. * VCAP_KF_LOOKUP_GEN_IDX: W12, sparx5: is0 * Generic index - for chaining CLM instances * VCAP_KF_LOOKUP_GEN_IDX_SEL: W2, sparx5: is0 * Select the mode of the Generic Index * VCAP_KF_LOOKUP_INDEX: W2, lan966x: is1 * 0: First lookup, 1: Second lookup, 2: Third lookup, Similar to VCAP_KF_FIRST * but with extra info * VCAP_KF_LOOKUP_PAG: W8, sparx5: is2, lan966x: is2 * Classified Policy Association Group: chains rules from IS1/CLM to IS2 * VCAP_KF_MIRROR_PROBE: W2, sparx5: es2 * Identifies frame copies generated as a result of mirroring * VCAP_KF_OAM_CCM_CNTS_EQ0: W1, sparx5: is2/es2, lan966x: is2 * Dual-ended loss measurement counters in CCM frames are all zero * VCAP_KF_OAM_DETECTED: W1, lan966x: is2 * This is missing in the datasheet, but present in the OAM keyset in XML * VCAP_KF_OAM_FLAGS: W8, lan966x: is2 * Frame's OAM flags * VCAP_KF_OAM_MEL_FLAGS: W7, lan966x: is2 * Encoding of MD level/MEG level (MEL) * VCAP_KF_OAM_MEPID: W16, lan966x: is2 * CCM frame's OAM MEP ID * VCAP_KF_OAM_OPCODE: W8, lan966x: is2 * Frame's OAM opcode * VCAP_KF_OAM_VER: W5, lan966x: is2 * Frame's OAM version * VCAP_KF_OAM_Y1731_IS: W1, sparx5: is2/es2, lan966x: is2 * Set if frame's EtherType = 0x8902 * VCAP_KF_PDU_TYPE: W4, lan966x: es0 * PDU type value (none, OAM CCM, MRP, DLR, RTE, IPv4, IPv6, OAM non-CCM) * VCAP_KF_PROT_ACTIVE: W1, sparx5: es0/es2 * Protection is active * VCAP_KF_RTP_ID: W10, lan966x: es0 * Classified RTP_ID * VCAP_KF_RT_FRMID: W32, lan966x: is1 * Profinet or OPC-UA FrameId * VCAP_KF_RT_TYPE: W2, lan966x: is1 * Encoding of frame's EtherType: 0: Other, 1: Profinet, 2: OPC-UA, 3: Custom * (ANA::RT_CUSTOM) * VCAP_KF_RT_VLAN_IDX: W3, lan966x: is1 * Real-time VLAN index from ANA::RT_VLAN_PCP * VCAP_KF_TCP_IS: W1, sparx5: is0/is2/es2, lan966x: is1/is2 * Set if frame is IPv4 TCP frame (IP protocol = 6) or IPv6 TCP frames (Next * header = 6) * VCAP_KF_TCP_UDP_IS: W1, sparx5: is0/is2/es2, lan966x: is1 * Set if frame is IPv4/IPv6 TCP or UDP frame (IP protocol/next header equals 6 * or 17) * VCAP_KF_TYPE: sparx5 is0 W2, sparx5 is0 W1, sparx5 is2 W4, sparx5 is2 W2, * sparx5 es0 W1, sparx5 es2 W3, lan966x is1 W1, lan966x is1 W2, lan966x is2 W4, * lan966x is2 W2 * Keyset type id - set by the API
*/
/* List of actionfields with description * * VCAP_AF_ACL_ID: W6, lan966x: is2 * Logical ID for the entry. This ID is extracted together with the frame in the * CPU extraction header. Only applicable to actions with CPU_COPY_ENA or * HIT_ME_ONCE set. * VCAP_AF_CLS_VID_SEL: W3, sparx5: is0 * Controls the classified VID: 0: VID_NONE: No action. 1: VID_ADD: New VID = * old VID + VID_VAL. 2: VID_REPLACE: New VID = VID_VAL. 3: VID_FIRST_TAG: New * VID = VID from frame's first tag (outer tag) if available, otherwise VID_VAL. * 4: VID_SECOND_TAG: New VID = VID from frame's second tag (middle tag) if * available, otherwise VID_VAL. 5: VID_THIRD_TAG: New VID = VID from frame's * third tag (inner tag) if available, otherwise VID_VAL. * VCAP_AF_CNT_ID: sparx5 is2 W12, sparx5 es2 W11 * Counter ID, used per lookup to index the 4K frame counters (ANA_ACL:CNT_TBL). * Multiple VCAP IS2 entries can use the same counter. * VCAP_AF_COPY_PORT_NUM: W7, sparx5: es2 * QSYS port number when FWD_MODE is redirect or copy * VCAP_AF_COPY_QUEUE_NUM: W16, sparx5: es2 * QSYS queue number when FWD_MODE is redirect or copy * VCAP_AF_CPU_COPY_ENA: W1, sparx5: is2/es2, lan966x: is2 * Setting this bit to 1 causes all frames that hit this action to be copied to * the CPU extraction queue specified in CPU_QUEUE_NUM. * VCAP_AF_CPU_QU: W3, sparx5: es0 * CPU extraction queue. Used when FWD_SEL >0 and PIPELINE_ACT = XTR. * VCAP_AF_CPU_QUEUE_NUM: W3, sparx5: is2/es2, lan966x: is2 * CPU queue number. Used when CPU_COPY_ENA is set. * VCAP_AF_CUSTOM_ACE_TYPE_ENA: W4, lan966x: is1 * Enables use of custom keys in IS2. Bits 3:2 control second lookup in IS2 * while bits 1:0 control first lookup. Encoding per lookup: 0: Disabled. 1: * Extract 40 bytes after position corresponding to the location of the IPv4 * header and use as key. 2: Extract 40 bytes after SMAC and use as key * VCAP_AF_DEI_A_VAL: W1, sparx5: es0, lan966x: es0 * DEI used in ES0 tag A. See TAG_A_DEI_SEL. * VCAP_AF_DEI_B_VAL: W1, sparx5: es0, lan966x: es0 * DEI used in ES0 tag B. See TAG_B_DEI_SEL. * VCAP_AF_DEI_C_VAL: W1, sparx5: es0 * DEI used in ES0 tag C. See TAG_C_DEI_SEL. * VCAP_AF_DEI_ENA: W1, sparx5: is0, lan966x: is1 * If set, use DEI_VAL as classified DEI value. Otherwise, DEI from basic * classification is used * VCAP_AF_DEI_VAL: W1, sparx5: is0, lan966x: is1 * See DEI_ENA * VCAP_AF_DLR_SEL: W2, lan966x: is1 * 0: No changes to port-based selection in ANA:PORT:OAM_CFG.DLR_ENA. 1: Enable * DLR frame processing 2: Disable DLR processing * VCAP_AF_DP_ENA: W1, sparx5: is0, lan966x: is1 * If set, use DP_VAL as classified drop precedence level. Otherwise, drop * precedence level from basic classification is used. * VCAP_AF_DP_VAL: sparx5 is0 W2, lan966x is1 W1 * See DP_ENA. * VCAP_AF_DSCP_ENA: W1, sparx5: is0, lan966x: is1 * If set, use DSCP_VAL as classified DSCP value. Otherwise, DSCP value from * basic classification is used. * VCAP_AF_DSCP_SEL: W3, sparx5: es0 * Selects source for DSCP. 0: Controlled by port configuration and IFH. 1: * Classified DSCP via IFH. 2: DSCP_VAL. 3: Reserved. 4: Mapped using mapping * table 0, otherwise use DSCP_VAL. 5: Mapped using mapping table 1, otherwise * use mapping table 0. 6: Mapped using mapping table 2, otherwise use DSCP_VAL. * 7: Mapped using mapping table 3, otherwise use mapping table 2 * VCAP_AF_DSCP_VAL: W6, sparx5: is0/es0, lan966x: is1 * See DSCP_ENA. * VCAP_AF_ES2_REW_CMD: W3, sparx5: es2 * Command forwarded to REW: 0: No action. 1: SWAP MAC addresses. 2: Do L2CP * DMAC translation when entering or leaving a tunnel. * VCAP_AF_ESDX: sparx5 es0 W13, lan966x es0 W8 * Egress counter index. Used to index egress counter set as defined in * REW::STAT_CFG. * VCAP_AF_FWD_KILL_ENA: W1, lan966x: is2 * Setting this bit to 1 denies forwarding of the frame forwarding to any front * port. The frame can still be copied to the CPU by other actions. * VCAP_AF_FWD_MODE: W2, sparx5: es2 * Forward selector: 0: Forward. 1: Discard. 2: Redirect. 3: Copy. * VCAP_AF_FWD_SEL: W2, sparx5: es0 * ES0 Forward selector. 0: No action. 1: Copy to loopback interface. 2: * Redirect to loopback interface. 3: Discard * VCAP_AF_HIT_ME_ONCE: W1, sparx5: is2/es2, lan966x: is2 * Setting this bit to 1 causes the first frame that hits this action where the * HIT_CNT counter is zero to be copied to the CPU extraction queue specified in * CPU_QUEUE_NUM. The HIT_CNT counter is then incremented and any frames that * hit this action later are not copied to the CPU. To re-enable the HIT_ME_ONCE * functionality, the HIT_CNT counter must be cleared. * VCAP_AF_HOST_MATCH: W1, lan966x: is2 * Used for IP source guarding. If set, it signals that the host is a valid (for * instance a valid combination of source MAC address and source IP address). * HOST_MATCH is input to the IS2 keys. * VCAP_AF_IGNORE_PIPELINE_CTRL: W1, sparx5: is2/es2 * Ignore ingress pipeline control. This enforces the use of the VCAP IS2 action * even when the pipeline control has terminated the frame before VCAP IS2. * VCAP_AF_INTR_ENA: W1, sparx5: is2/es2 * If set, an interrupt is triggered when this rule is hit * VCAP_AF_ISDX_ADD_REPLACE_SEL: W1, sparx5: is0 * Controls the classified ISDX. 0: New ISDX = old ISDX + ISDX_VAL. 1: New ISDX * = ISDX_VAL. * VCAP_AF_ISDX_ADD_VAL: W8, lan966x: is1 * If ISDX_REPLACE_ENA is set, ISDX_ADD_VAL is used directly as the new ISDX. * Encoding: ISDX_REPLACE_ENA=0, ISDX_ADD_VAL=0: Disabled ISDX_EPLACE_ENA=0, * ISDX_ADD_VAL>0: Add value to classified ISDX. ISDX_REPLACE_ENA=1: Replace * with ISDX_ADD_VAL value. * VCAP_AF_ISDX_ENA: W1, lan966x: is2 * Setting this bit to 1 causes the classified ISDX to be set to the value of * POLICE_IDX[8:0]. * VCAP_AF_ISDX_REPLACE_ENA: W1, lan966x: is1 * If set, classified ISDX is set to ISDX_ADD_VAL. * VCAP_AF_ISDX_VAL: W12, sparx5: is0 * See isdx_add_replace_sel * VCAP_AF_LOOP_ENA: W1, sparx5: es0 * 0: Forward based on PIPELINE_PT and FWD_SEL * VCAP_AF_LRN_DIS: W1, sparx5: is2, lan966x: is2 * Setting this bit to 1 disables learning of frames hitting this action. * VCAP_AF_MAP_IDX: W9, sparx5: is0 * Index for QoS mapping table lookup * VCAP_AF_MAP_KEY: W3, sparx5: is0 * Key type for QoS mapping table lookup. 0: DEI0, PCP0 (outer tag). 1: DEI1, * PCP1 (middle tag). 2: DEI2, PCP2 (inner tag). 3: MPLS TC. 4: PCP0 (outer * tag). 5: E-DEI, E-PCP (E-TAG). 6: DSCP if available, otherwise none. 7: DSCP * if available, otherwise DEI0, PCP0 (outer tag) if available using MAP_IDX+8, * otherwise none * VCAP_AF_MAP_LOOKUP_SEL: W2, sparx5: is0 * Selects which of the two QoS Mapping Table lookups that MAP_KEY and MAP_IDX * are applied to. 0: No changes to the QoS Mapping Table lookup. 1: Update key * type and index for QoS Mapping Table lookup #0. 2: Update key type and index * for QoS Mapping Table lookup #1. 3: Reserved. * VCAP_AF_MASK_MODE: sparx5 is0 W3, sparx5 is2 W3, lan966x is2 W2 * Controls the PORT_MASK use. Sparx5: 0: OR_DSTMASK, 1: AND_VLANMASK, 2: * REPLACE_PGID, 3: REPLACE_ALL, 4: REDIR_PGID, 5: OR_PGID_MASK, 6: VSTAX, 7: * Not applicable. LAN966X: 0: No action, 1: Permit/deny (AND), 2: Policy * forwarding (DMAC lookup), 3: Redirect. The CPU port is untouched by * MASK_MODE. * VCAP_AF_MATCH_ID: W16, sparx5: is2 * Logical ID for the entry. The MATCH_ID is extracted together with the frame * if the frame is forwarded to the CPU (CPU_COPY_ENA). The result is placed in * IFH.CL_RSLT. * VCAP_AF_MATCH_ID_MASK: W16, sparx5: is2 * Mask used by MATCH_ID. * VCAP_AF_MIRROR_ENA: W1, lan966x: is2 * Setting this bit to 1 causes frames to be mirrored to the mirror target port * (ANA::MIRRPORPORTS). * VCAP_AF_MIRROR_PROBE: W2, sparx5: is2 * Mirroring performed according to configuration of a mirror probe. 0: No * mirroring. 1: Mirror probe 0. 2: Mirror probe 1. 3: Mirror probe 2 * VCAP_AF_MIRROR_PROBE_ID: W2, sparx5: es2 * Signals a mirror probe to be placed in the IFH. Only possible when FWD_MODE * is copy. 0: No mirroring. 1-3: Use mirror probe 0-2. * VCAP_AF_MRP_SEL: W2, lan966x: is1 * 0: No changes to port-based selection in ANA:PORT:OAM_CFG.MRP_ENA. 1: Enable * MRP frame processing 2: Disable MRP processing * VCAP_AF_NXT_IDX: W12, sparx5: is0 * Index used as part of key (field G_IDX) in the next lookup. * VCAP_AF_NXT_IDX_CTRL: W3, sparx5: is0 * Controls the generation of the G_IDX used in the VCAP CLM next lookup * VCAP_AF_OAM_SEL: W3, lan966x: is1 * 0: No changes to port-based selection in ANA:PORT:OAM_CFG.OAM_CFG 1: Enable * OAM frame processing for untagged frames 2: Enable OAM frame processing for * single frames 3: Enable OAM frame processing for double frames 4: Disable OAM * frame processing * VCAP_AF_PAG_OVERRIDE_MASK: W8, sparx5: is0, lan966x: is1 * Bits set in this mask will override PAG_VAL from port profile. New PAG = (PAG * (input) AND ~PAG_OVERRIDE_MASK) OR (PAG_VAL AND PAG_OVERRIDE_MASK) * VCAP_AF_PAG_VAL: W8, sparx5: is0, lan966x: is1 * See PAG_OVERRIDE_MASK. * VCAP_AF_PCP_A_VAL: W3, sparx5: es0, lan966x: es0 * PCP used in ES0 tag A. See TAG_A_PCP_SEL. * VCAP_AF_PCP_B_VAL: W3, sparx5: es0, lan966x: es0 * PCP used in ES0 tag B. See TAG_B_PCP_SEL. * VCAP_AF_PCP_C_VAL: W3, sparx5: es0 * PCP used in ES0 tag C. See TAG_C_PCP_SEL. * VCAP_AF_PCP_ENA: W1, sparx5: is0, lan966x: is1 * If set, use PCP_VAL as classified PCP value. Otherwise, PCP from basic * classification is used. * VCAP_AF_PCP_VAL: W3, sparx5: is0, lan966x: is1 * See PCP_ENA. * VCAP_AF_PIPELINE_ACT: W1, sparx5: es0 * Pipeline action when FWD_SEL > 0. 0: XTR. CPU_QU selects CPU extraction queue * 1: LBK_ASM. * VCAP_AF_PIPELINE_FORCE_ENA: W1, sparx5: is2 * If set, use PIPELINE_PT unconditionally and set PIPELINE_ACT = NONE if * PIPELINE_PT == NONE. Overrules previous settings of pipeline point. * VCAP_AF_PIPELINE_PT: sparx5 is2 W5, sparx5 es0 W2 * Pipeline point used if PIPELINE_FORCE_ENA is set * VCAP_AF_POLICE_ENA: W1, sparx5: is2/es2, lan966x: is1/is2 * If set, POLICE_IDX is used to lookup ANA::POL. * VCAP_AF_POLICE_IDX: sparx5 is2 W6, sparx5 es2 W6, lan966x is1 W9, lan966x is2 * W9 * Policer index. * VCAP_AF_POLICE_REMARK: W1, sparx5: es2 * If set, frames exceeding policer rates are marked as yellow but not * discarded. * VCAP_AF_POLICE_VCAP_ONLY: W1, lan966x: is2 * Disable policing from QoS, and port policers. Only the VCAP policer selected * by POLICE_IDX is active. Only applies to the second lookup. * VCAP_AF_POP_VAL: W2, sparx5: es0 * Controls popping of Q-tags. The final number of Q-tags popped is calculated * as shown in section 4.28.7.2 VLAN Pop Decision. * VCAP_AF_PORT_MASK: sparx5 is0 W65, sparx5 is2 W68, lan966x is2 W8 * Port mask applied to the forwarding decision based on MASK_MODE. * VCAP_AF_PUSH_CUSTOMER_TAG: W2, sparx5: es0 * Selects tag C mode: 0: Do not push tag C. 1: Push tag C if * IFH.VSTAX.TAG.WAS_TAGGED = 1. 2: Push tag C if IFH.VSTAX.TAG.WAS_TAGGED = 0. * 3: Push tag C if UNTAG_VID_ENA = 0 or (C-TAG.VID ! = VID_C_VAL). * VCAP_AF_PUSH_INNER_TAG: W1, sparx5: es0, lan966x: es0 * Controls inner tagging. 0: Do not push ES0 tag B as inner tag. 1: Push ES0 * tag B as inner tag. * VCAP_AF_PUSH_OUTER_TAG: W2, sparx5: es0, lan966x: es0 * Controls outer tagging. 0: No ES0 tag A: Port tag is allowed if enabled on * port. 1: ES0 tag A: Push ES0 tag A. No port tag. 2: Force port tag: Always * push port tag. No ES0 tag A. 3: Force untag: Never push port tag or ES0 tag * A. * VCAP_AF_QOS_ENA: W1, sparx5: is0, lan966x: is1 * If set, use QOS_VAL as classified QoS class. Otherwise, QoS class from basic * classification is used. * VCAP_AF_QOS_VAL: W3, sparx5: is0, lan966x: is1 * See QOS_ENA. * VCAP_AF_REW_OP: W16, lan966x: is2 * Rewriter operation command. * VCAP_AF_RT_DIS: W1, sparx5: is2 * If set, routing is disallowed. Only applies when IS_INNER_ACL is 0. See also * IGR_ACL_ENA, EGR_ACL_ENA, and RLEG_STAT_IDX. * VCAP_AF_SFID_ENA: W1, lan966x: is1 * If set, SFID_VAL is used to lookup ANA::SFID. * VCAP_AF_SFID_VAL: W8, lan966x: is1 * Stream filter identifier. * VCAP_AF_SGID_ENA: W1, lan966x: is1 * If set, SGID_VAL is used to lookup ANA::SGID. * VCAP_AF_SGID_VAL: W8, lan966x: is1 * Stream gate identifier. * VCAP_AF_SWAP_MACS_ENA: W1, sparx5: es0 * This setting is only active when FWD_SEL = 1 or FWD_SEL = 2 and PIPELINE_ACT * = LBK_ASM. 0: No action. 1: Swap MACs and clear bit 40 in new SMAC. * VCAP_AF_TAG_A_DEI_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects PCP for ES0 tag A. 0: Classified DEI. 1: DEI_A_VAL. 2: DP and QoS * mapped to PCP (per port table). 3: DP. * VCAP_AF_TAG_A_PCP_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects PCP for ES0 tag A. 0: Classified PCP. 1: PCP_A_VAL. 2: DP and QoS * mapped to PCP (per port table). 3: QoS class. * VCAP_AF_TAG_A_TPID_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects TPID for ES0 tag A: 0: 0x8100. 1: 0x88A8. 2: Custom * (REW:PORT:PORT_VLAN_CFG.PORT_TPID). 3: If IFH.TAG_TYPE = 0 then 0x8100 else * custom. * VCAP_AF_TAG_A_VID_SEL: sparx5 es0 W2, lan966x es0 W1 * Selects VID for ES0 tag A. 0: Classified VID + VID_A_VAL. 1: VID_A_VAL. * VCAP_AF_TAG_B_DEI_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects PCP for ES0 tag B. 0: Classified DEI. 1: DEI_B_VAL. 2: DP and QoS * mapped to PCP (per port table). 3: DP. * VCAP_AF_TAG_B_PCP_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects PCP for ES0 tag B. 0: Classified PCP. 1: PCP_B_VAL. 2: DP and QoS * mapped to PCP (per port table). 3: QoS class. * VCAP_AF_TAG_B_TPID_SEL: sparx5 es0 W3, lan966x es0 W2 * Selects TPID for ES0 tag B. 0: 0x8100. 1: 0x88A8. 2: Custom * (REW:PORT:PORT_VLAN_CFG.PORT_TPID). 3: If IFH.TAG_TYPE = 0 then 0x8100 else * custom. * VCAP_AF_TAG_B_VID_SEL: sparx5 es0 W2, lan966x es0 W1 * Selects VID for ES0 tag B. 0: Classified VID + VID_B_VAL. 1: VID_B_VAL. * VCAP_AF_TAG_C_DEI_SEL: W3, sparx5: es0 * Selects DEI source for ES0 tag C. 0: Classified DEI. 1: DEI_C_VAL. 2: * REW::DP_MAP.DP [IFH.VSTAX.QOS.DP]. 3: DEI of popped VLAN tag if available * (IFH.VSTAX.TAG.WAS_TAGGED = 1 and tot_pop_cnt>0) else DEI_C_VAL. 4: Mapped * using mapping table 0, otherwise use DEI_C_VAL. 5: Mapped using mapping table * 1, otherwise use mapping table 0. 6: Mapped using mapping table 2, otherwise * use DEI_C_VAL. 7: Mapped using mapping table 3, otherwise use mapping table * 2. * VCAP_AF_TAG_C_PCP_SEL: W3, sparx5: es0 * Selects PCP source for ES0 tag C. 0: Classified PCP. 1: PCP_C_VAL. 2: * Reserved. 3: PCP of popped VLAN tag if available (IFH.VSTAX.TAG.WAS_TAGGED=1 * and tot_pop_cnt>0) else PCP_C_VAL. 4: Mapped using mapping table 0, otherwise * use PCP_C_VAL. 5: Mapped using mapping table 1, otherwise use mapping table * 0. 6: Mapped using mapping table 2, otherwise use PCP_C_VAL. 7: Mapped using * mapping table 3, otherwise use mapping table 2. * VCAP_AF_TAG_C_TPID_SEL: W3, sparx5: es0 * Selects TPID for ES0 tag C. 0: 0x8100. 1: 0x88A8. 2: Custom 1. 3: Custom 2. * 4: Custom 3. 5: See TAG_A_TPID_SEL. * VCAP_AF_TAG_C_VID_SEL: W2, sparx5: es0 * Selects VID for ES0 tag C. The resulting VID is termed C-TAG.VID. 0: * Classified VID. 1: VID_C_VAL. 2: IFH.ENCAP.GVID. 3: Reserved. * VCAP_AF_TYPE: W1, sparx5: is0, lan966x: is1 * Actionset type id - Set by the API * VCAP_AF_UNTAG_VID_ENA: W1, sparx5: es0 * Controls insertion of tag C. Untag or insert mode can be selected. See * PUSH_CUSTOMER_TAG. * VCAP_AF_VID_A_VAL: W12, sparx5: es0, lan966x: es0 * VID used in ES0 tag A. See TAG_A_VID_SEL. * VCAP_AF_VID_B_VAL: W12, sparx5: es0, lan966x: es0 * VID used in ES0 tag B. See TAG_B_VID_SEL. * VCAP_AF_VID_C_VAL: W12, sparx5: es0 * VID used in ES0 tag C. See TAG_C_VID_SEL. * VCAP_AF_VID_REPLACE_ENA: W1, lan966x: is1 * Controls the classified VID: VID_REPLACE_ENA=0: Add VID_ADD_VAL to basic * classified VID and use result as new classified VID. VID_REPLACE_ENA = 1: * Replace basic classified VID with VID_VAL value and use as new classified * VID. * VCAP_AF_VID_VAL: sparx5 is0 W13, lan966x is1 W12 * New VID Value * VCAP_AF_VLAN_POP_CNT: W2, lan966x: is1 * See VLAN_POP_CNT_ENA * VCAP_AF_VLAN_POP_CNT_ENA: W1, lan966x: is1 * If set, use VLAN_POP_CNT as the number of VLAN tags to pop from the incoming * frame. This number is used by the Rewriter. Otherwise, VLAN_POP_CNT from * ANA:PORT:VLAN_CFG.VLAN_POP_CNT is used
*/
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
