Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/net/ethernet/stmicro/stmmac/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  stmmac_est.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2023, Intel Corporation
 * stmmac EST(802.3 Qbv) handling
 */

#include <linux/iopoll.h>
#include <linux/types.h>
#include "stmmac.h"
#include "stmmac_est.h"

static int est_write(void __iomem *est_addr, u32 reg, u32 val, bool gcl)
{
 u32 ctrl;

 writel(val, est_addr + EST_GCL_DATA);

 ctrl = (reg << EST_ADDR_SHIFT);
 ctrl |= gcl ? 0 : EST_GCRR;
 writel(ctrl, est_addr + EST_GCL_CONTROL);

 ctrl |= EST_SRWO;
 writel(ctrl, est_addr + EST_GCL_CONTROL);

 return readl_poll_timeout(est_addr + EST_GCL_CONTROL, ctrl,
      !(ctrl & EST_SRWO), 100, 5000);
}

static int est_configure(struct stmmac_priv *priv, struct stmmac_est *cfg,
    unsigned int ptp_rate)
{
 void __iomem *est_addr = priv->estaddr;
 int i, ret = 0;
 u32 ctrl;

 if (!ptp_rate) {
  netdev_warn(priv->dev, "Invalid PTP rate");
  return -EINVAL;
 }

 ret |= est_write(est_addr, EST_BTR_LOW, cfg->btr[0], false);
 ret |= est_write(est_addr, EST_BTR_HIGH, cfg->btr[1], false);
 ret |= est_write(est_addr, EST_TER, cfg->ter, false);
 ret |= est_write(est_addr, EST_LLR, cfg->gcl_size, false);
 ret |= est_write(est_addr, EST_CTR_LOW, cfg->ctr[0], false);
 ret |= est_write(est_addr, EST_CTR_HIGH, cfg->ctr[1], false);
 if (ret)
  return ret;

 for (i = 0; i < cfg->gcl_size; i++) {
  ret = est_write(est_addr, i, cfg->gcl[i], true);
  if (ret)
   return ret;
 }

 ctrl = readl(est_addr + EST_CONTROL);
 if (priv->plat->has_xgmac) {
  ctrl &= ~EST_XGMAC_PTOV;
  ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_XGMAC_PTOV_MUL) <<
    EST_XGMAC_PTOV_SHIFT;
 } else {
  ctrl &= ~EST_GMAC5_PTOV;
  ctrl |= ((NSEC_PER_SEC / ptp_rate) * EST_GMAC5_PTOV_MUL) <<
    EST_GMAC5_PTOV_SHIFT;
 }
 if (cfg->enable)
  ctrl |= EST_EEST | EST_SSWL | EST_DFBS;
 else
  ctrl &= ~EST_EEST;

 writel(ctrl, est_addr + EST_CONTROL);

 /* Configure EST interrupt */
 if (cfg->enable)
  ctrl = EST_IECGCE | EST_IEHS | EST_IEHF | EST_IEBE | EST_IECC;
 else
  ctrl = 0;

 writel(ctrl, est_addr + EST_INT_EN);

 return 0;
}

static void est_irq_status(struct stmmac_priv *priv, struct net_device *dev,
      struct stmmac_extra_stats *x, u32 txqcnt)
{
 u32 status, value, feqn, hbfq, hbfs, btrl, btrl_max;
 void __iomem *est_addr = priv->estaddr;
 u32 txqcnt_mask = BIT(txqcnt) - 1;
 int i;

 status = readl(est_addr + EST_STATUS);

 value = EST_CGCE | EST_HLBS | EST_HLBF | EST_BTRE | EST_SWLC;

 /* Return if there is no error */
 if (!(status & value))
  return;

 if (status & EST_CGCE) {
  /* Clear Interrupt */
  writel(EST_CGCE, est_addr + EST_STATUS);

  x->mtl_est_cgce++;
 }

 if (status & EST_HLBS) {
  value = readl(est_addr + EST_SCH_ERR);
  value &= txqcnt_mask;

  x->mtl_est_hlbs++;

  for (i = 0; i < txqcnt; i++)
   if (value & BIT(i))
    x->mtl_est_txq_hlbs[i]++;

  /* Clear Interrupt */
  writel(value, est_addr + EST_SCH_ERR);

  /* Collecting info to shows all the queues that has HLBS
 * issue. The only way to clear this is to clear the
 * statistic
 */

  if (net_ratelimit())
   netdev_err(dev, "EST: HLB(sched) Queue 0x%x\n", value);
 }

 if (status & EST_HLBF) {
  value = readl(est_addr + EST_FRM_SZ_ERR);
  feqn = value & txqcnt_mask;

  value = readl(est_addr + EST_FRM_SZ_CAP);
  hbfq = (value & EST_SZ_CAP_HBFQ_MASK(txqcnt)) >>
   EST_SZ_CAP_HBFQ_SHIFT;
  hbfs = value & EST_SZ_CAP_HBFS_MASK;

  x->mtl_est_hlbf++;

  for (i = 0; i < txqcnt; i++)
   if (feqn & BIT(i))
    x->mtl_est_txq_hlbf[i]++;

  /* Clear Interrupt */
  writel(feqn, est_addr + EST_FRM_SZ_ERR);

  if (net_ratelimit())
   netdev_err(dev, "EST: HLB(size) Queue %u Size %u\n",
       hbfq, hbfs);
 }

 if (status & EST_BTRE) {
  if (priv->plat->has_xgmac) {
   btrl = FIELD_GET(EST_XGMAC_BTRL, status);
   btrl_max = FIELD_MAX(EST_XGMAC_BTRL);
  } else {
   btrl = FIELD_GET(EST_GMAC5_BTRL, status);
   btrl_max = FIELD_MAX(EST_GMAC5_BTRL);
  }
  if (btrl == btrl_max)
   x->mtl_est_btrlm++;
  else
   x->mtl_est_btre++;

  if (net_ratelimit())
   netdev_info(dev, "EST: BTR Error Loop Count %u\n",
        btrl);

  writel(EST_BTRE, est_addr + EST_STATUS);
 }

 if (status & EST_SWLC) {
  writel(EST_SWLC, est_addr + EST_STATUS);
  netdev_info(dev, "EST: SWOL has been switched\n");
 }
}

const struct stmmac_est_ops dwmac510_est_ops = {
 .configure = est_configure,
 .irq_status = est_irq_status,
};

Messung V0.5
C=96 H=91 G=93

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.