/** * struct mt7615_uni_txd - mcu command descriptor for firmware v3 * @txd: hardware descriptor * @len: total length not including txd * @cid: command identifier * @pkt_type: must be 0xa0 (cmd packet by long format) * @frag_n: fragment number * @seq: sequence number * @checksum: 0 mean there is no checksum * @s2d_index: index for command source and destination * Definition | value | note * CMD_S2D_IDX_H2N | 0x00 | command from HOST to WM * CMD_S2D_IDX_C2N | 0x01 | command from WA to WM * CMD_S2D_IDX_H2C | 0x02 | command from HOST to WA * CMD_S2D_IDX_H2N_AND_H2C | 0x03 | command from HOST to WA and WM * * @option: command option * BIT[0]: UNI_CMD_OPT_BIT_ACK * set to 1 to request a fw reply * if UNI_CMD_OPT_BIT_0_ACK is set and UNI_CMD_OPT_BIT_2_SET_QUERY * is set, mcu firmware will send response event EID = 0x01 * (UNI_EVENT_ID_CMD_RESULT) to the host. * BIT[1]: UNI_CMD_OPT_BIT_UNI_CMD * 0: original command * 1: unified command * BIT[2]: UNI_CMD_OPT_BIT_SET_QUERY * 0: QUERY command * 1: SET command
*/ struct mt7615_uni_txd {
__le32 txd[8];
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.