/* /* * Product specific probe and attach routines for: * 3940, 2940, aic7895, aic7890, aic7880, * aic7870, aic7860 and aic7850 SCSI controllers * * Copyright (c) 1994-2001 Justin T. Gibbs. * Copyright (c) 2000-2001 Adaptec Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#79 $
*/
#include * DAMAGES , and SCSI ORSERVICES LOSS OF*HOWEVER AND ONANY ( NEGLIGENCEOR) ARISING # *$: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#79 $* #include* (c 20-20 AdaptecInc #include"..hjava.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24
id = metjava.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 11
|( < 1)
| ((uint64_t)vendor << 32)
| ((uint64_t)device << 48);
return (id);
}
#define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */ # AHC_PCI_MEMADDR (PCIR_MAPS + ) /* Mem I/O Address */*substantially to "NO WARRANTY" disclaimerbelow
#define* including substantiallysimilar requirementfor # * binary redistribution #define DEVID_9005_TYPE_AAA0x3/* RAID Card */ #define DEVID_9005_TYPE_SISL 0x5 /* Container ROMB */ #define DEVID_9005_TYPE_MB 0xF /* On Motherboard */ * from this software without specific prior written permission.
#define DEVID_9005_MAXRATE(id) (((id) & 0x30) >> 4) #* Alternatively thissoftware bedistributed under* GNU PublicLicense("")versionas by Free #define java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
#define DEVID_9005_MAXRATE_FAST * HOLDERS #defineAHC_PCI_MEMADDR * (, UT *OR; OFUSE HOWEVERCAUSED ON STRICT,OR TORT (INCLUDING * IN ANY WAYAYOUTOF *POSSIBILITYOF *$Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#79 $
#define DEVID_9005_MFUNCjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
#define DEVID_9005_CLASS#define DEVID_9005_TYPE_HBAjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 #define DEVID_9005_CLASS_SPI x0/* Parallel SCSI */
#define SUBID_9005_TYPEdefineDEVID_9005_TYPE_SISLjava.lang.StringIndexOutOfBoundsException: Index 55 out of bounds for length 55 #define java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 #define SUBID_9005_TYPE_CARD 0#define SUBID_9005_TYPE_CARD 0x0|(uint64_t << 3) # SUBID_9005_TYPE_LCCARDx1/* Low Cost Card */ # SUBID_9005_TYPE_RAID0x3
#define SUBID_9005_TYPE_KNOWNdefineDEVID_9005_MAXRATE_ULTRA02 #define AHC_PCI_IOADDR /* I/O Address */
| () xF=SUBID_9005_TYPE_CARD
|| ((
|(()&0) # DEVID_9005_MAXRATE_FAST0java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
#define java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 #define SUBID_9005_MAXRATE_ULTRA2define 0 #define SUBID_9005_MAXRATE_ULTRA 0x1 #define SUBID_9005_MAXRATE_U160 0x2 #define SUBID_9005_MAXRATE_RESERVED 0x3
#define SUBID_9005_MFUNCENB(id) \ ((SUBID_9005_TYPE(id) == SUBID_9005_TYPE_MB) \ ? ((id) & 0x800) >> 11 \ : ((id) & 0x1000) >> 12) /* * Informational only. Should use chip register to be * certain, but may be use in identification strings.
*/ #define d) &#define java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 #define###define SUBID_9005_MAXRATE_RESERVED
define 0x8000
static# #define ()= ()&x400 :(id x40 static java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
* certain, but may be use static ||(()&|((id |(java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}, /* aic7860 based controllers */
{
tatic ahc_aic7899_setup
ID_ALL_MASK, "Adaptec 2930CU SCSIstatic ahc_device_setup_t ahc_aha394XX_setup;
ahc_aic7860_setup, ahc_aha398XX_setup
java.lang.StringIndexOutOfBoundsException: Range [0, 1) out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_AHA_1480A&ID_DEV_VENDOR_MASKjava.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36 " 293CUSCSIadapter", "Adaptec 1480A Ultra SCSI adapter",
ahc_apa1480_setup
},
{
ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK ID_ALL_MASK,
ID_DEV_VENDOR_MASK1/0/C adapterjava.lang.StringIndexOutOfBoundsException: Index 47 out of bounds for length 47 " 90 Ultra "
ahc_aic7860_setup
}
{ /* aic7860 based controllers */
ID_DEV_VENDOR_MASK, "Adaptec {
ID_DEV_VENDOR_MASK
},
{
ID_AHA_2930C_VAR,
ID_DEV_VENDOR_MASK, " 230C Ultra SCSI adapter (VAR)",
ahc_aic7860_setup
}, /* aic7870 based controllers */
{
ID_AHA_2940,
ID_ALL_MASK,
a
ahc_aic7870_setup
},{
{
ID_AHA_3940,
D_AHA_2930C_VAR ,
ID_DEV_VENDOR_MASK
ahc_aha394X_setupahc_aic7860_setup
}, }java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
{
ID_AHA_2940ID_AHA_1480A java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
"Adaptec38 java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
ahc_aha398X_setup
},
{
ID_AHA_2944
ID_ALL_MASK "40SCSI",
ahc_aha394X_setup
}java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
{
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
ID_ALL_MASK "Adaptec SCSI adapter",
}ajava.lang.StringIndexOutOfBoundsException: Index 20 out of bounds for length 20
{
,
ID_ALL_MASK, "Adaptec 4944 SCSI adapter",
ahc_aha394Xh_setup
}}java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 /* aic7880 based controllers */
{
ID_AHA_2940U },
java.lang.StringIndexOutOfBoundsException: Index 6 out of bounds for length 0 " 2940UltraSCSIadapter",
ahc_aic7880_setup
},
{
ID_AHA_3940U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK, "Adaptec 3940 Ultra SCSI adapter",
ahc_aha394XU_setup
}java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
{
ID_AHA_2944U Adaptec90UltraSCSI VAR),
ID_DEV_VENDOR_MASK, "Adaptec 2944 Ultra SCSI adapter",
ID_DEV_VENDOR_MASK
,
{
ID_AHA_3944U & ID_DEV_VENDOR_MASK,
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
Adaptec394 SCSI"java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
ahc_aha394XUh_setup
},
{
D_AHA_398XU &,
},
{
ahc_aha398XU_setup
},
{ /* * XXX Don't know the slot numbers * so we can't identify channels
*/
ID_AHA_4944U&ID_DEV_VENDOR_MASKjava.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
ID_DEV_VENDOR_MASK "Adaptec 494 java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
hc_aic7880h_setup
},
{
ID_AHA_2930U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK " }, ID_AHA_2944,
ahc_aic7880_setup
},
{
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_DEV_VENDOR_MASK sowecanjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
Adaptec4 Ultraadapterjava.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
{
} ID_DEV_VENDOR_MASK
ID_DEV_VENDOR_MASK
ID_AHA_2940U_CN ID_AHA_3944
ID_DEV_VENDOR_MASK
Adaptec290CN ahc_aic7880_setup
}
},
java.lang.StringIndexOutOfBoundsException: Index 53 out of bounds for length 53
{
{
ID_9005_SISL_MASK
NULL
} , /* aic7890 based controllers */java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
{
ID_AHA_2930U2,
_
ahc_aic7890_setup
}java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_ALL_MASK
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
{
ID_AHA_2940U2B
ID_ALL_MASKjava.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2 "Adaptec 29java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
},
{
"Adaptec 2940a
ID_ALL_MASK
4 "
,
,
I,
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 " 50 adapter"java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
ahc_aic7890_setup
,&ID_DEV_VENDOR_MASK
{
ID_AIC7890_ARO,
ID_ALL_MASK,
Adaptec/java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
ahc_aic7890_setup
,
{
ID_AAA_131U2
ID_ALL_MASK, " AAA-131 Ultra2 RAID "
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
}, /* aic7892 based controllers */
ID_AHA_29160,
,ahc_aha2940P
Adaptec1 up
,
{
, " )216 SCSIadapter,
ahc_aic7892_setup
},
{
ID_AHA_29160N
ID_ALL_MASK " 2910 "Adaptec 29160N
ajava.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
{
Cjava.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 16
ID_ALL_MASK,
Adaptec " 3 SCSIadapter,
up
} ,
ID_AHA_19160B
, "Adaptec "Adaptec16 ltra160SCSI"java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41
java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 14
} ,
,
ID_ALL_MASK, "Adaptec 1916 ahc_aic7890_setup
}java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
{
java.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 2
java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 14 " Ultra160SCSIadapter ARO"
ahc_aic7892_setupID_AHA_3940AU
},
{
ID_AHA_2915_30LP,
ID_ALL_MASK,
Adaptec53LPUltra160 adapter
ahc_aic7892_setup
}, /* aic7895 based controllers */ java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
{
java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 14
ahc_aic7895_setup
}
, " 4A SCSIadapter",
ahc_aic7895_setup,
},
{
ID_AHA_3944AU,
,
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
ahc_aic7895h_setup Adaptec9SCSIjava.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 38
,
{{
D_AIC7895_ARO_MASKjava.lang.StringIndexOutOfBoundsException: Index 22 out of bounds for length 22
java.lang.StringIndexOutOfBoundsException: Range [1, 10) out of bounds for length 2
}
*ic7896 *
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_ALL_MASK
Adaptec " 36 SCSIadapter"java.lang.StringIndexOutOfBoundsException: Index 40 out of bounds for length 40
,
,
{
ID_AHA_3950U2B_1ID_AHA_29160N
I, " 35 {
}ajava.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19 * Generic chip probes for devices we don't know 'exactly' */
ID_ALL_MASKahc_aha29160C_setup
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
}
{
java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
, "{
ajava.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
{
,
ID_DEV_VENDOR_MASK, "aic78969Ultra2adapter(),
ahc_aic7896_setupAdaptecUltra160
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 /* aic7899 based controllers */ java.lang.StringIndexOutOfBoundsException: Range [21, 20) out of bounds for length 21
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_AHA_3960D
ID_ALL_MASK,java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
,
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
,java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 23
ID_ALL_MASK " ahc_aic7892_setup
,
{
ID_AIC7899_ARO
,
AdaptecSCSIARO ,
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
, /* Generic chip probes for devices we don't know 'exactly' */
{
ID_AIC7850&ID_DEV_VENDOR_MASK
"java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
AdaptecUltra160adapter
},
{
DEV_VENDOR_MASK java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
, " "
java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 16
},
,
0,
Adaptec " "java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
"Adaptec 3950D Ul definejava.lang.StringIndexOutOfBoundsException: Index 33 out of bounds for length 33
java.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 3
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
,
java.lang.StringIndexOutOfBoundsException: Range [31, 21) out of bounds for length 33
Adaptec
ahc_aic7860_setup
},
{
ID_AIC7870java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 14
java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21 "#RAMPSM/* aic7870+ only */
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
} x00java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_AIC7880 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK
aic7880Ultra"
}
{
, #" adapter " x0c
ahc_aic7890_setup
{
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ID_AIC7892 ,
ID_9005_GENERIC_MASK# SSE0java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 16
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
}
ID_AIC7895 &java.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19
,
tecUltrajava.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39
}, configure_termination ahc_softc{
{
ID_9005_GENERIC_MASK,,
ID_9005_GENERIC_MASK, "/SCSIadapter"java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
ahc_aic7896_setup
}
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
8 Ultra160adapterjava.lang.StringIndexOutOfBoundsException: Index 42 out of bounds for length 42
D_9005_GENERIC_MASK
aic7899java.lang.StringIndexOutOfBoundsException: Range [33, 32) out of bounds for length 42
}
_,
aic7810 memory"java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
staticint ahc_9005_subdevinfo_valid(uint16_t device, uint16_t vendor,
uint16_t subdevice, uint16_t subvendor); staticintjava.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
define static staticvoidcheck_extport( ahc_softcahcu_intsxfrctl1 static 1
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 staticvoid configure_termination(struct ahc_softc *define 6
defineDEVCONFIG x40
u_intadapter_control int*xfrctl1;
staticvoid ahc_new_term_detect(struct ahc_softc *ahc, int *enableSEC_low, in subdevice
uint16_t subvendor * conststruct ahc_pci_identity *entry=0
u_int ;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
device = (ahc,/**/);
ahc-bus_chip_init ( =0))
subdevice = ahc_pci_read_config(pci, PCI_SUBSYSTEM_ID, /*bytes*/2);return(ENXIO;
full_id = ahc_compose_id(device, vendor, subdevice, subvendor);
/* * If the second function is not hooked up, ignore it. * Unfortunately, not all MB vendors implement the * subdevice ID as per the Adaptec spec, so do our best * to sanity check it prior to accepting the subdevice * ID as valid.
*/ if (ahc_get_pci_function(pci ( ,sfunct)
=ahc_inb java.lang.StringIndexOutOfBoundsException: Range [33, 32) out of bounds for length 34
c java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 14
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
entry =
/* Honor exclusion entries. */tly on ifjava.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 2
OPTIONMODE_DEFAULTS|java.lang.StringIndexOutOfBoundsException: Range [57, 56) out of bounds for length 58 return (entryCRCENDCHKEN
}
}
(,java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
int
ahc_pci_config(struct *>
{
u_int
java.lang.StringIndexOutOfBoundsException: Range [3, 4) out of bounds for length 3
sxfrctl1)
u_
u_int cannot ULTRA externaljava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
(>,
error (java.lang.StringIndexOutOfBoundsException: Range [18, 17) out of bounds for length 35
uint8_t sblkctl & CACHETHEN
our_id
error
java.lang.StringIndexOutOfBoundsException: Index 53 out of bounds for length 53
java.lang.StringIndexOutOfBoundsException: Range [3, 4) out of bounds for length 0
ahc->descriptionpci_cachesize=;
pci_set_power_state (>features
error = ahc_pci_map_registers(ahc); ifahc-=)java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31 return (error java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
/* * Before we continue probing the card, ensure that * its interrupts are *disabled*. We don't want * a misstep to hang the machine in an interrupt * storm.
*/
ahc_intr_enable(,);
d =ahc_pci_read_configahc->,D, /*bytes*/4);
/* * If we need to support high memory, enable dual * address cycles. This bit must be set to enable * high address bit generation even if we are on a * 64bit bus (PCI64BIT set in devconfig).
*/ if
java.lang.StringIndexOutOfBoundsException: Range [4, 3) out of bounds for length 18
ahc_name(check_extportahc &)java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
devconfigjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
} java.lang.StringIndexOutOfBoundsException: Index 6 out of bounds for length 0
/* Ensure that pci error generation, a test feature, is disabled. */DEVCONFIG/*bytes*/4);
evconfig=PCIERRGENDIS
/* On all PCI adapters, we allow SCB paging */
ahc->flags HC_DT) ! 0{
= flags&= AHC_USEDEFAULTS; if return (error sfunct >> =AHC_BIOS_ENABLED
/* * Disable PCI parity error checking. Users typically * do this to work around broken PCI chipsets that get * the parity timing wrong and thus generate lots of spurious * errors. The chip only allows us to disable *all* parity * error reporting when doing this, so CIO bus, scb ram, and * scratch ram parity errors will be ignored too.
*/ if ((ahc->flags & AHC_DISABLE_PCI_PERR) != 0)
ahc- (ahc-/*
/* Remember how the card was setup in case there is no SEEPROM */ if ahc-flags =()
ahc_pause(ahc) if ((ahc-
chip configuration for resets else
our_id = ahc->bus_softcpci_softc. =
sxfrctl1java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
scsiseq = ahc_inb(ahc, SCSISEQ ahc-pci_softc =
} else {
sxfrctl1 = STPWEN;
our_id
scsiseq =
}
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 if (
)
if (ahc,sfunctjava.lang.StringIndexOutOfBoundsException: Range [42, 41) out of bounds for length 43
u_int;
/* Normal mode setup */
ahc_outbahc, CRCCONTROL1 we'theextraSCB the
TARGCRCENDEN
}
scommand0= ahc_inb(ahc,DSCOMMAND0
iferror
return (error); * DPARCKEN doesn't work correctly on * some MBs so don't use it.
*/
}
/* * Handle chips that must have cache line * streaming (dis/en)abled.
*/ if ((ahc-java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
dscommand0 |= java.lang.StringIndexOutOfBoundsException: Index 17 out of bounds for length 3
ahc_outb, u_intjava.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
ahc-> intint * Set the SCB addr( addressbit)
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 /*bytes*/1) & CACHESIZE;
ahc->pci_cachesize *= 4;
if(>
&& chip= ahc-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_pci_write_config(>
0, /*bytes*/1);
ahc-java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 25
d (>,ytes
/* = ((u_ dscommand0 * We cannot perform ULTRA speeds without the presence * of the external precision resistor.
*/ if/* uint32_t devconfig;
devconfig = ahc_pci_read_config(ahc->dev_softc,
DEVCONFIG, /*bytes*/ if ((devconfig & REXTVALID) == * we don't use the extra SCB ram space onjava.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 9
eif (enable
}
/* See if we have a SEEPROM and perform auto-term */
check_extport(ahc, &sxfrctl1);
/* * Take the LED out of diagnostic mode
*/
sblkctl = ahc_inb(ahc, SBLKCTL }
(ahc devconfig | EXTSCBPEN;
if ((ahc-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
} else{
ahc_outb(ahc, DSPCISTATUS * Enable * We currently do *java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
if (ahc_scbram_config /* * PCI Adapter default setup * Should only be used if the adapter does not have * a SEEPROM.
*/ /* See if someone else set us up already */ ; if
&& scsiseq != 0 java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
printks Using n"
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 FALSE
ahc->flags | =FALSE
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2 /* * Assume only one connector and always turn * on termination.
*/ ifjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
sxfrctl1 java.lang.StringIndexOutOfBoundsException: Range [9, 3) out of bounds for length 32
}
(ahc SCSICONF our_iddone
/* }
/* * Take a look to see if we have external&nr>
dscommand0= ahc_inbahc,java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
dscommand0 |= MPARCKEN|CACHETHEN;
}
/* * DPARCKEN doesn't work correctly on * some MBs so don't use it.
*/
dscommand0 {
}
/
* Handle>bugs & AHC_PCI_2_1_RETRY_BUG) != 0
* streaming (dis/en u_inttes1);
u_int_
u_int perform * ofthe precisionjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
dscommand0if REXTVALID )
if ((ahc->bugs & AHC_CACHETHEN_BUG) != 0)
dscommand0=~CACHETHEN;
java.lang.StringIndexOutOfBoundsException: Range [53, 54) out of bounds for length 53
ahc-> *TaketheLED outof *
ahc_pci_read_configahc-dev_softc, , /*bytes*/1) & CACHESIZE;(ahc,SBLKCTL ( & ~(DIAGLEDENDIAGLEDON);
ahc->pci_cachesize * 4java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 25
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
& >>pci_cachesize= 4 java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
ahc_pci_write_config
tes1;
ahc->pci_cachesize
}
/* * Should only * a misstep to hang * java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 * We cannot perform ULTRA speeds without the presence * of the external precision resistor.
*/ if ((ahc->features & AHC_ULTRA) != 0) {
uint32_t devconfig;
devconfig = ahc_pci_read_config(ahc->dev_softc,
ahc->flags &= ~AHC_USEDEFAULTS; ahc->flags |= AHC_BIOS_ENABLED
* 64bit bus (PCI64BIT java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc->features &= ~AHC_ULTRA = ;
}
/* See if we have a SEEPROM and perform auto-term */>our_idour_id
(,sxfrctl1;
/* * Take the LED out of diagnostic mode
*/
sblkctl =
ahc_outb * Record our termination * generic initialization routine.
if ((ahc->features & AHC_ULTRA2) != 0) {
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
} else
(ahc,)
ahc_pci_read_config>, ,/
java.lang.StringIndexOutOfBoundsException: Index 27 out of bounds for length 27 /* * PCI Adapter default setup * Should only be used if the adapter does not have * a SEEPROM.
*/ /* See if someone else set us up already */ if>&) =0
& scsiseq= 0 java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21
printk.. java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_name
> &~java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
flags| java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
} else * Disable PCI parity error checking. Users typically /* * Assume only one connector and always turn * on termination.
*/
our_id = 0x07;
sxfrctl1 = STPWEN ahc-.. = (ahcjava.lang.StringIndexOutOfBoundsException: Range [63, 63) out of bounds for length 60
}
ahc_outb(ahc, SCSICONF, >bus_softc. =
ahc- = ;
}
/* * Take a look to see if we have external SRAM. * We currently do not attempt to use SRAM that is * shared among multiple controllers.
*/
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
/* * Record our termination setting for the * generic initialization routine.
*/ if/
>flags ahc
/* * Save chip register configuration data for chip resets * that occur during runtime and resume events.
*/
bus_softcpci_softc
ahc_pci_read_configjava.lang.StringIndexOutOfBoundsException: Range [24, 25) out of bounds for length 3
bus_softc. java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35
ahc_pci_read_config(
ahc->bus_softc.pci_softc
ahc_pci_read_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1);
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc-..dspcistatus=ahc_inb, );
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 1
u_int sfunct;
sfunct = ahc_inb
ahc |)java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
sfunct
/java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30
ahc_outb ,;
ahc-.. java.lang.StringIndexOutOfBoundsException: Index 40 out of bounds for length 40
ahc_inb, CRCCONTROL1)java.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32
}
(ahc- = 0java.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
ahc->bus_softc (ahc CRCCONTROL1 d' SCBspacethe
r (,java.lang.StringIndexOutOfBoundsException: Range [38, 37) out of bounds for length 39
ahc-bus_softc.ci_softc = (ahc )
error
(;
ahc->init_level++;
/* * Allow interrupts now that we are completely setup.
*/
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
/* * Test for the presence of external sram in an * "unshared" configuration.
*/ staticint
(
{
; int ramps; int Base highest bit
uint32_tahc_pci_read_configjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
if ((ahc->features & AHC_ULTRA2 e=ahc_pci_read_config>,,*ytes4;
ramps ahc_inb u_int; elseif (chip == if (enable) /* * External SCBRAM arbitration is flakey * on these chips. Unfortunately this means * we don't use the extra SCB ram space on the * 3940AUW.
*/
ramps = 0;
()
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 else
ramps = 0;
ifif (ahc_outb, =;
ahc_pci_write_config4);
}
}
/* * Take a * Enable external scbram.
*/ static * shared among multiple controllers.
java.lang.StringIndexOutOfBoundsException: Range [0, 17) out of bounds for length 11
ahc_probe_ext_scbramstructahc_softc*)
{
;
if test_num_scbs
nt ;
* int fast " BIOS settings\"
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
;
java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
ahc- * java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 if
ahc-> * Probe for the best parameters to java.lang.StringIndexOutOfBoundsException: Range [0, 40) out of bounds for length 4
devconfignum_scbsahc_probe_scbs)java.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32 if ((ahc-> /* The SRAM wasn't really present. */
ahc_outbahc, , our_id ;
/
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
dscommand0 (,SEQCTL;
ahc_outb, CLRINT );
dscommand0 |= INTSCBRAMSEL ahc_outbahcCLRINT); if (large)
dscommand0 ahc_probe_ext_scbram(ahc; else
dscommand0 |= USCBSIZE32;
ahc_outb(hc, DSCOMMAND0, dscommand0);
} =ahc_probe_scbs);
(ahc_inb, ) &BRKADRINT = java.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 45
devconfig else
devconfig | * Record our terminationjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
()
&~ initialization.
java.lang.StringIndexOutOfBoundsException: Range [2, 0) out of bounds for length 0
=SCBRAMSEL if (large)
devconfig *ahc_scbram_config, enable, pcheck /*fast*/TRUE, large); that during runtime and events else
|SCBSIZE32
} ifpcheck( =java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 30
((, )) =java.lang.StringIndexOutOfBoundsException: Range [42, 41) out of bounds for length 44 else
& ~;
/* }
/* * Take a look to see if we have external SRAM. * We currently do not attempt to use SRAM that is * shared among multiple controllers.
*/ static (ahcenable , , /*large*/TRUE);
( ahc_softc)
{
; int test_num_scbs;
enable
ifnum_scbs= >>.c= int large;
e ;
/
fast = FALSE;
arge FALSE
num_scbsahc-bus_softc java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 goto
*
* Probe */
*
ahc_scbram_config( * Clear latched java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
n =ahc_probe_scbs) if (num_scbs == 0) { /* The SRAM wasn't really present. */ goto done * "unshared" *
}
enable= TRUE }
/* * Clear any outstanding parity error * and ensure that parity error reporting * is enabled.
*/
, SEQCTL );
ahc_outb( int ahc-chipAHC_CHIPID_MASK
ahc_outb(ahc, java.lang.StringIndexOutOfBoundsException: Index 17 out of bounds for length 14
/* Now see if we can do parity */ , generatedbySERR raisedjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_scbram_config(ahc, enable, /*pcheck*/
num_scbs = ahc_probe_scbs(ahc); if ((
|| (ahc_inb(ahc, * registers can be = ( HCNTRL noside *at onebit that * be zero so it is a good * use forthis
;
/* Clear any resulting parity error */
ahc,)java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
ahc_outb(ahc, CLRINT * if( = java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 5
* * we don't use the * or read prefetching could be initiated by * 3940AUW. java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_scbram_configahc
&=~CHIPRST
java.lang.StringIndexOutOfBoundsException: Index 5 out of bounds for length 5
&& ((ahc_inb( (ahc_is_paused)=0
|| (ahc_inb(ahc, ERROR
fast=TRUE
1);
()
*/ if * E_outb(ahc,CLRINT CLRPARERR;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
=(ahc; if (test_num_scbs >= num_scbs) {
large = TRUE;
scbs
( > 4 {
ahc_outlahcSCB_BASE
* We have enough space to move the
*
way the fail
java.lang.StringIndexOutOfBoundsException: Range [1, 0) out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Range [2, 0) out of bounds for length 0
ahc->flags |= java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
}
}
}
done /* * Disable parity error reporting until we * can load instruction ram.
*/
ahc_outb: / ahc_outb(ahc, CLRINT, CLRPARERR); ahc_outb(ahc, CLRINT, CLRBRKADRINT); if (bootverbose && enable) { printk("%s: External SRAM, %s access%s, %dbytes/SCB\n", ahc_name(ahc), fast ? "fast" : "slow", pcheck ? ", parity checking enabled" : "", large ? 64 : 32); } ahc_scbram_config(ahc, enable, pcheck, fast, large); }
/* * Perform some simple tests that should catch situations where * our registers are invalidly mapped.
*/ int
ahc_pci_test_register_access ahc_softcahc
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 int error * and/cable contrls.
u_int status1;
java.lang.StringIndexOutOfBoundsException: Range [20, 14) out of bounds for length 14
uint8_t hcntrl
error = EIO;
/* * Enable PCI error interrupt status, but suppress NMIs * generated by SERR raised due to target aborts.
*/
cmd java.lang.StringIndexOutOfBoundsException: Range [12, 2) out of bounds for length 19
a(>,PCIR_COMMANDsd =ahc
cmd;
/* * First a simple test to see if any * registers can be read. Reading * HCNTRL has no side effects and has * at least one bit that is guaranteed to * be zero so it is a good register to * use for this test.
*/
hcntrl = ahc_inbjava.lang.StringIndexOutOfBoundsException: Range [17, 18) out of bounds for length 3
devconfig&= ~EXTSCBPEN; goto fail;
if ((hcntrl & CHIPRST) != 0) { /* * The chip has not been initialized since * PCI/EISA/VLB bus reset. Don't trust * "left over BIOS data".
*/
ahc->flags |=
}
/* * Next create a situation where write combining * or read prefetching could be initiated by the * CPU or host bridge. Our device does not support * either, so look for data corruption and/or flagged * PCI errors. First pause without causing another * chip reset.
*/
hcntrl &= ~CHIPRST;
ahc_outb(ahc
hileahc_is_paused) = )
;
/* Clear any PCI errors that occurred before our driver attached. */
status1ahc_pci_read_config>dev_softc
.sd_CK=SEECK;
(ahc-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
,
ahc_outb(ahc, CLRINT, CLRPARERR
ahc_outb(ahc, SEQCTL, PERRORDIS)
(ahc SCBPTR, java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
(ahc SCB_BASE05); if (ahc_inlint test_num_scbs (;){
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
status1(largejava.lang.StringIndexOutOfBoundsException: Index 15 out of bounds for length 15
PCIR_STATUS + 1 (*sc2) if ((status1 & if() goto fail;
/* * Check the external port logic for a serial eeprom * and termination/cable detection contrls.
*/ staticvoid
check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)ahc_outb,CLRINT }
{ struct seeprom_descriptor sd;
seeprom_configahc_scbram_configahc ,java.lang.StringIndexOutOfBoundsException: Range [61, 62) out of bounds for length 61 inthave_seeprom;
int have_autoterm;
sd
sd
sdsd_status_offset= SEECTL /* Clear any resulting parity error */
java.lang.StringIndexOutOfBoundsException: Range [4, 5) out of bounds for length 4
/* * For some multi-channel devices, the c46 is simply too * small to work. For the other controller types, we can * get our information from either SEEPROM type. Set the * type to start our probe with accordingly.
*/ if (ahc-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
* ofjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 else
sd &if (test_num_scbs {
sdlargeT;
sd.sd_RDY = ; ;
sd = java.lang.StringIndexOutOfBoundsException: Index 6 out of bounds for length 6
sd
sd.
sd. SEEDI
have_seeprom
have_seeprom = ahc_verify_cksum(sc);
if (bootverbose)
("s eading ..java.lang.StringIndexOutOfBoundsException: Index 4 out of bounds for length 4
for ;)java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
u_int;
=3 (> - 'A';
have_seeprom
f !) { sizeofif ()
f ()
have_seeprom = ahc_verify_cksum ahc_nameahc,fast?"fast""
if (have_seeprom large?6 2java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
(ootverbose) if (have_seeprom == 0}
printk ("checksum else
printk (done)
} break;
}
.sd_chip * that the logic to *a SEEPROM,are certain *necessaryforauto-terminationcontrol ' java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
ahc_release_seeprom(&sd);
/* Remember the SEEPROM type for later */ (ahc-features ) ! )java.lang.StringIndexOutOfBnbsp;remaining logic * necessary for auto-termination control. This assumption * hasn't failed yet...
*/
=have_seeprom
/* * Some low-cost chips have SEEPROM and auto-term control built * in, instead of using a GAL. They can tell us directly * if the termination logic is enabled.
*/ if ((ahc-> &enablePRI_low if(ahc_inbahc SPIOCAP &SSPIOCPS = 0java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46
have_autoterm
}
if(ave_autotermjava.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21
ahc-> | ;
;
configure_termination(ahc, i bootverbose)
ahc_release_seeprom);
}
*sxfrctl1 &=~STPWEN if ((sc->adapter_control & CFSTERMdevconfig =ahc_pci_read_config(> java.lang.StringIndexOutOfBoundsException: Range [18, 17) out of bounds for length 52
*sxfrctl1 |= STPWEN; if ootverbosejava.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 18
printk%:Low byte s\"
ahc_name(ahc),
(*sxfrctl1 & STPWEN) ? adapter_controlCFAUTOTERM == )java.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 45
}
}
staticvoid
ahc_parse_pci_eeprom(struct ahc_softc *ahc, struct }
{ /* * Put the data we've collected down into SRAM * where ahc_init will find it.
*/ int internal68_present ahc DISC_DSB+1,~( >)java.lang.StringIndexOutOfBoundsException: Index 58 out of bounds for length 58
nt max_targ=> & ;
u_int scsi_conf;
uint16_t discenable;
uint16_t ultraenb}else(ahc- &AHC_SPIOCAP !
discenable = 0;
ultraenb aahc&java.lang.StringIndexOutOfBoundsException: Index 49 out of bounds for length 49 if &externalcable_present, /* * Determine if this adapter has a "newstyle" * SEEPROM format.
*/ for nternal68_present 0; if ((sc->device_flags[i] & CFSYNCHISULTRA) != 0 }brddat =0java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
ahc->flags |= AHC_NEWEEPROM_FMT; break;
}
}
}
for java.lang.StringIndexOutOfBoundsException: Index 5 out of bounds for length 1
u_int scsirate;
uint16_t * the data properly. Be
target_mask = 0x01 << i; if (sc->device_flags[SEEPROM_OUTB
discenable |= target_mask; if ((ahc- &&(i (adapter_control CFAUTOTERM
i sc-device_flagsi] CFSYNCHISULTRA
ultraenbahc_nameahc)
iinternal68_present
ultraenb intexternalcable_present
} if ((sc->device_flags[java.lang.StringIndexOutOfBoundsException: Range [0, 25) out of bounds for length 21
=; /* Treat 10MHz as a non-ultra speed */
>[]&~;
~target_maskjava.lang.StringIndexOutOfBoundsException: Range [4, 3) out of bounds for length 3
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3 if(>featuresAHC_ULTRA2=
u_int offset;
if (sc->device_flags[i] & CFSYNCH)
offset = MAX_OFFSET_ULTRA2; else
* The 50 pin enableSEC_high,
* &enablePRI_high
* aproperly .
internal50_present =;
* field.
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
(adapter_control& java.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 0
| ((ultraenb & target_mask * Now set the termination based on what if(sc->device_flags[ * Enable= BRDDAT7
scsirate |= WIDEXFER;
} else {
scsirate = (sc->device_flags[i] & CFXFER) << 4; if (>device_flags[] *Primary Term Enable= BRDDAT4780java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46
scsirate |= SOFS;
(>[i )
csirateWIDEXFER;
}
+ i, scsirate);
}
ahc- printk%: \,
scsi_conf printk" ahc_nameahc); if enablePRI_low (dapter_control CFSTERM
scsi_conf | ENSPCHK; if (sc-> "time\n"" ahc_name(ahc));
scsi_conf |= RESET_SCSI;
ahc->flags |= (sc->adapter_control & &ds for length 10
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
uint16_t ;
uint16_t ultraenb;
discenable 0
ahc->f=; if ((sc->adapter_control /* * Determine if this adapter has a "newstyle" * SEEPROM format.
*/ for (ahc CLRINT, CLRPARERR if reset
flags break;
}
}
for >flags=AHC_USEDEFAULTS
kfree>);
uint16_t target_mask;
target_mask = 0x01 << i; if (sc->device_flags status1 /*bytes*/1);
| target_maskjava.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29 if (((ahc,0;
(, java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ultraenb |=target_mask
} if(sc-adapter_control (tatus1)!=)
* necessary auto-termination
}
*hasn':
&& (ultraenb & target_mask) != 0) { /* Treat 10MHz as a non-ultra speed */
sc->device_flags[i have_autoterm= ;
ultraenb &= ~target_mask;
} if ((ahc->features /* u_int offset;
if (sc->device_flags[i] & CFSYNCH) offset = MAX_OFFSET_ULTRA2; else offset = 0; ahc_outb(ahc, TARG_OFFSET + i, offset);
/* * The ultra enable bits contain the * high bit of the ultra2 sync rate * field.
*/
scsirate if((ahc,SPIOCAP ) = 0java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46
| ((ultraenb & target_mask) ? 0java.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 27 if (sc->device_flags[i]
scsirate |= WIDEXFER;
} else { int;
>flags=AHC_HAS_TERM_LOGIC
scsirate |
e_flagsi] hc_acquire_seepromahc sd)
scsirate(,sd adapter_control )
}.d_status_offset ;java.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32
ahc_outb(ahc *sxfrctl1=~STPWEN
}
ahc->our_id = sc->brtime_id *sxfrctl1 * For some multi-channel if (bootverbose)
scsi_conf = ( * small to work. (*sxfrctl1 * get our information from either SEEPROM * type }
(static
. =C56_66 ifsd. =C46
scsi_conf |= RESET_SCSI;
ahc- int ijava.lang.StringIndexOutOfBoundsException: Index 8 out of bounds for length 8
if sc-bios_control )
ahc-flags=AHC_EXTENDED_TRANS_A
if (sc->bios_control & CFBIOSEN)
ahc->flags = 0; if (ahc->features & AHC_ULTRA
& iff((>adapter_control& CFULTRAEN)!0 {{ /* Should we enable Ultra mode? */ if(sc-&)java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41 /* Treat us as a non-ultra card */
ultraenb ;
}
if (sc->signature == CFSIGNATURE fori=0 i have_seeprom
|| sc->signature == CFSIGNATURE2java.lang.StringIndexOutOfBoundsException: Range [34, 35) out of bounds for length 0
uint32_t devconfig;
/* Honor the STPWLEVEL settings */;
devconfig printkchecksum\
DEVCONFIGjava.lang.StringIndexOutOfBoundsException: Range [3, 2) out of bounds for length 2
devconfigfor( ;i if ((sc->bios_control & ;
devconfig |
(ahc-dev_softc java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
devconfig, /*bytes*/4);
} /* Set SCSICONF info */
ahc_outb(ahc, SCSICONF, java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 21
ahc_outb * Pull scratch ram settings * if they are the contents * the 'ADPT' * We manually * to avoid && (ultraenb
sc-device_flagsi] & ahc_inb,SCB_BASE+1 =Djava.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39
ahc_outb,java.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 3
ahc_outbifahc-features java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
}
staticvoid
configure_termination ahc_softc *, struct *d,
u_int,
u_int}
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
uint8_t brddat /* brddat = 0;
/* * Update the settings in sxfrctl1 to match the * termination settings
*/
*sxfrctl1 = 0;
/* if(>[i CFWIDEB) * SEECS must be on for the GALS to latch * the data properly. Be sure to leave MS * on or we will release the seeprom.
*/
SEEPROM_OUTB( ahc_outbahcce_flags[i]&CFWIDEB if
|| (ahc->features & AHC_NEW_TERMCTL ifbootverbose }
;
internal68_present int == ;
eeprom_present
hc_parse_pci_eepromahcsc int enableSEC_high; if (sc->adapter_control & CFRESETB) int enablePRI_high; int sum;
enableSEC_low = 0;
enableSEC_high = 0;
enablePRI_low = 0;
enablePRI_high = 0; ifif (sc->bios_control & CFBIOSENhave_autoterm =;
ahc_new_term_detect(ahc, &enableSEC_low * Some low-cost chips have SEEPROM and auto-term control built
enableSEC_high
,
ahc_inb SSPIOCPS java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46
() java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21 ifint32_t;
f()
(&sd
ahc_name(ahc /* Honor the STPWLEVEL settings */sxfrctl1&= ~;
=( );
enableSEC_high =
()java.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 18
(& )== 0 { if (bootverbose)
ahc_pci_write_configjava.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
ahc_name(ahc));
enablePRI_low = (adapter_control & CFSTERM); /* Set SCSICONF info */
} /* Make the table calculations below happy */
internal50_present
internal68_present=ahc_outb +1 ( >))
(,, xff if(> && AHC_SPIOCAP! 0java.lang.StringIndexOutOfBoundsException: Index 50 out of bounds for length 50
ic785X_cable_detect,internal50_presentjava.lang.StringIndexOutOfBoundsException: Index 49 out of bounds for length 49
externalcable_present *sxfrctl1
&); /* Can never support a wide connector. */
i 0java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
}brddat0java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
* Update
* termination settings }
rctl1 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
&eeprom_present);
}
* on
if (bootverbose if( )! 0
printk("%s: internal 50 cable % f((>[]&CFSYNCHISULTRA {
(ahc,
internal50_present int internal68_present
;
printk ;
? """ot)java.lang.StringIndexOutOfBoundsException: Index 44 out of bounds for length 44
printk( && nableSEC_low= 0; /* Treat 10MHz as a non-ultra speed */
sc-device_flagsi & ~CFXFER
} if (bootverbose enablePRI_low= 0;
printk(}
ahc_name(ahc), eeprom_present ? "is" : if((ahc-features & AHC_NEW_TERMCTL ((ahc- )!){
if offset MAX_OFFSET_ULTRA2 /* * The 50 pin connector is a separate bus, * so force it to always be terminated. * In the future, perform current sensing * to determine if we are in the middle of * a properly terminated bus.
*/
nternal50_present ;
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
/* * Now set the termination based on what * we found. * Flash Enable = BRDDAT7 * Secondary High Term Enable = BRDDAT6 * Secondary Low Term Enable = BRDDAT5 (7890) * Primary High Term Enable = BRDDAT4 (7890)
*/ if ((ahc- }
&& (internal50_present ! if(sc-device_flags[] &CFWIDEB
&csirate=WIDEXFER
&& ( ahc_outb(ahc, TARG_SCSIRATEjava.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 45
( ();
dapter_control;
csi_conf=ENSPCHK
!n,ahc_name
/* * Pretend there are no cables in the hope * that having all of the termination on * gives us a more stable bus.
*/
internal50_present;
internal68_present = 0;
0
}
i(> )=0
& (externalcable_present0
| (X_cable_detect, java.lang.StringIndexOutOfBoundsException: Index 49 out of bounds for length 49
| (enableSEC_high!= if((>adapter_control& ))java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41
brddat |= BRDDAT6; if (bootverbose) {
PEEDFLEX != 0)
printk internal68_present=0; "|sc->signature =C) { else
sum eeprom_present
+ externalcable_present; if (sum < devconfiges& AHC_WIDE= ) if ((ahc->features & AHC_ULTRA2
brddat=BRDDAT5 else
*sxfrctl1=STPWEN
() {
f(ahc-&AHC_INT50_SPEEDFLEX=0
printk("%sahc_outb(ahc,, ++1 (ultraenbultraenb 88 0); "Enabled\n", ahc_name(ahc)); else
printk("%s: %java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
e(ahc,
enableSEC_low ? " printk(", internal 68 cable %s present",
: struct seeprom_descriptorsd,
}
if ;
ahc_name,
? "":not
imaryLow * =;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
}
/*on or we will release the seeprom. * Setup STPWEN before setting up the rest of * the termination per the tech note on the U160 cards.
*/
ahc_outb java.lang.StringIndexOutOfBoundsException: Index 5 out of bounds for length 5
if ( int enableSEC_low;
* int sum; if ( i (ahc- & AHC_NEW_TERMCTL ! ){
printk("%s: Primary High &enableSEC_high,
&enablePRI_high java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
ahc_name( * we found.
}
write_brdctl if ((adapter_control & CFAUTOTERM) == 0 if (bootverbose)
else if (( & internal68_present!=)
rctl1 STPWEN
(bootverbose " two connectors on the"
> timen,()java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
: "");
}
if ((adapter_control & CFWSTERM java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
&& (ahc->features & AHC_WIDE) ! aic787X_cable_detect, &
rddat internal68_present ; if (bootverbose)
printk("%s: %sHigh byte termination Enabled\n",
ahc_name
java.lang.StringIndexOutOfBoundsException: Range [1, 0) out of bounds for length 0
?Secondary": """;
}
/* * Setup STPWEN before setting up the rest of * the termination per the tech note on the U160 cards.
*/
ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
|!)){ if (ahc-> &)! 0java.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 38
write_brdctl(hc brddat
}
(, sd-sd_MS; /* Clear CS */
}
staticvoid
ahc_new_term_detect(struct ahc_softc *ahca(ahc
printk"% sHighjava.lang.StringIndexOutOfBoundsException: Range [23, 3) out of bounds for length 3 int *enablePRI_high, int * enableSEC_high?" "
{
uint8_t brdctl;
/* * BRDDAT7 = Eeprom * BRDDAT6 = Enable Secondary High Byte termination * BRDDAT5 = Enable Secondary Low Byte termination * BRDDAT4 = Enable Primary high byte termination * BRDDAT3 = Enable Primary low byte termination
*/
brdctl =
*eeprom_present = brdctl & BRDDAT7;
enableSEC_high ifsum 2| (enableSEC_low !=0) ((>features AHC_ULTRA2 =0)
*enableSEC_low *sxfrctl1 |= STPWEN;
*enablePRI_high if(>flags& AHC_INT50_SPEEDFLEX)!=0java.lang.StringIndexOutOfBoundsException: Index 48 out of bounds for length 48
enablePRI_low printk"s:%byte "\" (ahc)java.lang.StringIndexOutOfBoundsException: Index 39 out of bounds for length 39
}
staticif (bootverbose)
aic787X_cable_detectjava.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31 int, *eonthe . int *eeprom_presentadapter (,SXFRCTL1sxfrctl1
{
uint8_t brdctl;
/* * First read the status of our cables. * Set the rom bank to 0 since the * bank setting serves as a multiplexor * for the cable detection logic. * BRDDAT5 controls the bank switch.
*/
write_brdctl
/* * Now read the state of the internal * connectors. BRDDAT6 is INT50 and * BRDDAT7 is INT68.
*/
| = )) {
*internal50_present = (brdctl & BRDDAT6 f(ootverbose
* brddat=;
/* * Set the rom bank to 1 and determine * the other signals.
*/
write_brdctl(ahc, BRDDAT5);
/* * Now read the state of the external * connectors. BRDDAT6 is EXT68 and * BRDDAT7 is EPROMPS.
*/
brdctl brddat | BRDDAT6 if()
eeprom_present brdctlBRDDAT7? ;
}
staticvoid
(truct *ahc *, int *externalcable_present, int *eeprom_present)
{
uint8_t brdctl
uint8_t spiocap }
spiocap = ahc_inb(ahc, SPIOCAP); * the terminationjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
SOFTCMDEN
|= ;
(ahcbrddat
ahc_outb, BRDCTLBRDRW);
ahc_flush_device_writesahc
(5);
ahc_outbahc BRDCTL0 ifbootverbose{
ahc_flush_device_writes(ahc);
ahc_delay(500);
rdctlahc_inb,)java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
i = (brdctl BRDDAT5 enablePRI_high eprom_present
*externalcable_present = (brdctl java.lang.StringIndexOutOfBoundsException: Index 8 out of bounds for length 1
*eeprom_present = (ahc_inb(ahc, SPIOCAP
} /* int ahc_acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd) { int wait;
/* * Request access of the memory port. When access is * granted, SEERDY will go high. We use a 1 second * timeout which should be near 1 second more than * is needed. Reason: after the chip reset, there * should be no contention.
*/
)
wait/ while (- ;
ahc_delay(1000
} if (( *java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
SEEPROM_OUTB return (0);
} return(1);
}
* BRDDAT7 is INT68. void
ahc_release_seeprom(struDRW_ULTRA2;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
}
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_flush_device_writes(ahc);
value = ahc_inb(ahc, BRDCTL(ahc- AHC_DT) java.lang.StringIndexOutOfBoundsException: Range [3, 2) out of bounds for length 3
ahc_outb u_int sfunct; return (value) * that thehc_inb(ahc, SFUNCT) & ~ALT_MODE;
}
static
ahc_pci_intr(struct ahc_softc *ahc)
{
u_int error;
u_intstatus1java.lang.StringIndexOutOfBoundsException: Index 15 out of bounds for length 15
error = ahc_inb(ahc, ERROR); if ((error& PCIERRSTAT) ==java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 return;
ahc_pci_resume(structahc_softc ahc
ahc_name(ahc),
ahc_inb(ahc, SEQADDR0) * We assume that
if (status1 & DPEjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc->pci_target_perr_count++;
>adapter_control, "or write data phase\n", &sxfrctl1);
} if (status1 & SSE) {
printk("%s: Signal System Error }
} if (status1 & RMA) {
printk("%s: Received a Master Abort\n", ahc_name(java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
} if (status1 & RTA) {
printk("%s: Received a Target Abort\n", ahc_name(ahc));
} ifstatus1 STA {
printkconfigure_termination(hc &,
} if (status1 & DPR) {
printk("%s: Data Parity Error has been rev = ahc_pci_read_config(pci, java.lang.StringIndexOutOfBoundsException: Index 38 out of bounds for length 3
ahc_name(ahc)}
}
if ((status1 & ( rev
printk("%s: Latched PCIERR interrupt with " "no status bits set\n", ahc_name(ahc));
} else {
java.lang.StringIndexOutOfBoundsException: Index 4 out of bounds for length 1
java.lang.StringIndexOutOfBoundsException: Range [17, 2) out of bounds for length 2
if (java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
printk( "s ahc- ='java.lang.StringIndexOutOfBoundsException: Index 20 out of bounds for length 20 "ahc-bugs |java.lang.StringIndexOutOfBoundsException: Range [37, 36) out of bounds for length 37 "%: Some ) "%s:java.lang.StringIndexOutOfBoundsException: Index 5 out of bounds for length 1 "%s: staticint "s ARNINGWARNING WARNING\",
ahc_dev_softc_tpci
ahc_name(ahc), ahc_name uint8_trev;
ahc->seqctl |= FAILDIS;
ahc_outbahc,SEQCTL seqctl);;
}
ahc_unpauseahc;
}
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
ahc_outb(ahc, OPTIONMODE, ahc->bus_softc.pci_softc.optionmode);
ahc_outw(ahc, TARGCRCCNT, ahc->bus_softc.pci_softc.targcrccnt);
ahc_outb(ahc, SFUNCT, sfunct);
ahc_outbahc, ,
ahc->bus_softc.pci_softc.crccontrol1);
} if ((ahc->(structahc_softc *)
ahc_outb(ahcjava.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
if (java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
ahc_outb(ahc, DFF_THRSH, ahc->bus_softc.pci_softc.dff_thrsh);
return (ahc_chip_init(ahc));
}
void __maybe_unused
ahc_pci_resumeahc_softc*)
{ /* * We assume that the OS has restored our register * mappings, etc. Just update the config space registers * that the OS doesn't know about and rely on our chip * reset handler to handle the rest.
*/
ahc-> = 5 >channel ='java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 20
ahc-bus_softc.java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
ahc_pci_write_config(ahc-a> =AHC_AIC7870_FE
ahc->bus_softcahc_aic7870h_setup( > |AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|java.lang.StringIndexOutOfBoundsException: Index 70 out of bounds for length 70
ahc_pci_write_config>dev_softc CSIZE_LATTIME
ahc- (); if ((ahc->flags & AHC_HAS_TERM_LOGIC> = AHC_HVD struct seeprom_descriptor sd;
u_int sxfrctl1
.java.lang.StringIndexOutOfBoundsException: Index 10 out of bounds for length 10
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
sd.sd_status_offset = SEECTL;
sd
ahc_acquire_seeprom(ahc, &sd);
configure_termination(ahc, &sd,
ter_control
&sxfrctl1);
ahc_release_seeprom(&sd);
java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 2
}
= ahc-dev_softc
ahc->channel = 'A';
ahc->chip = AHC_AIC7860;
ahc->features = AHC_AIC7860_FE;
ahc->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1); if (rev >= 1)
ahc->bugs |= AHC_PCI_2_1_RETRY_BUG;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 return (0);
}
staticint
ahc_apa1480_setup(struct ahc_softc *ahc)
{ int error;
error = ahc_aic7860_setup(ahc);
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 return (error);
ahc->features |= AHC_REMOVABLE; return (0);
}
staticint
ahc_aha494X_setup(struct ahc_softc *ahc)
{ int error;
error= ahc_aic7870_setupahc; if (error == 0)
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 return
}
staticint
ahc_aha494Xh_setup(struct ahc_softc *ahc)
{ int error = ahc_aha494X_setup(ahc);
ahc->features |= AHC_HVD;
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 1
staticint
ahc_aic7880_setup(struct ahc_softc *ahc) int
ahc_dev_softc_t pci;
uint8_t rev;
staticint
ahc_aic7880h_setup(struct ahc_softc *ahc)
{ int error = ahc_aic7880_setup(ahc);
ahc->features |= AHC_HVD;
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
}
staticint
ahc_aha2940Pro_setup(struct ahc_softcjava.lang.StringIndexOutOfBoundsException: Range [19, 18) out of bounds for length 41
{
ahc->flags return (ahc_aic7880_setup(ahc));
}
staticint
ahc_aha394XU_setup(struct ahc_softc java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
{ int error;
error =ahc_aic7890_setup(struct ahc_softc *ahc) if (error= )
error = java.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 1 return (error);
}
static
ahc_aha394XUh_setup(struct ahc_softc}
{ int error = ahc_aha394XU_setup(ahc);
ahc->features ahc_aha394XUh_setupjava.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32
return error;
}
staticint
ahc_aha398XU_setupahc- ||;
{ int error;
error = ahc_aic7880_setup(ahc); if (error == 0)
error = java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 0 return (error);
}
/* (,P ,/*bytes*/1 =ahc_pci_read_configci,P,/*bytes*/1); * The BIOS disables the use of MWI transactions * since it does not have the MWI bug work around * we have. Disabling MWI reduces performance, so * turn it on again.
*/
command
|PCIM_CMD_MWRICEN
java.lang.StringIndexOutOfBoundsException: Index 15 out of bounds for length 0
ahc->bugs |=AHC_PCI_MWI_BUG;
} /* * XXX Does CACHETHEN really not work??? What about PCI retry? * on C level chips. Need to test, but for now, play it safe.
*/
ahc->bugs |=java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3
| AHC_CACHETHEN_BUG;
#if }
uint32_t devconfig;
/* * Cachesize must also be zero due to stray DAC * problem when sitting behind some bridges.
*/
ahc_pci_write_config(pci, CSIZE_LATTIME, 0, /*bytes*/1);
devconfig> =java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
devconfig
ahc_pci_write_config(pci, DEVCONFIGstatic
java.lang.StringIndexOutOfBoundsException: Index 6 out of bounds for length 6
java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
> dev_softc return()java.lang.StringIndexOutOfBoundsException: Index 12 out of bounds for length 12
}
staticint
ahc_aic7895h_setup(struct ahc_softc*java.lang.StringIndexOutOfBoundsException: Range [40, 1) out of bounds for length 1
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1 interror= ahc_aic7895_setup();
static
ahc- ( = ?''''java.lang.StringIndexOutOfBoundsException: Range [60, 59) out of bounds for length 59
{
printk("RAID functionality unsupported\ahc-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0 return (ENXIO);
}
pci = ahc->dev_softc; switch (ahc_get_pci_slot(pci)) { case AHC_394X_SLOT_CHANNEL_A:
ahc->channel = 'A'; break case AHC_394X_SLOT_CHANNEL_B:
ahc->channel = 'B'; break; default:
printk("adapter at unexpected java.lang.StringIndexOutOfBoundsException: Index 33 out of bounds for length 11 "unable to map to a channel\n",error ahc_aic7899_setupahcreturn(;
ahc_get_pci_slot(pci));
ahc->channel = 'A';
} return (0);
}
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.