Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/ssb/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 15 kB image not shown  

Quelle  sdio.c   Sprache: C

 
/*
 * Sonics Silicon Backplane
 * SDIO-Hostbus related functions
 *
 * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
 *
 * Based on drivers/ssb/pcmcia.c
 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
 * Copyright 2007-2008 Michael Buesch <m@bues.ch>
 *
 * Licensed under the GNU/GPL. See COPYING for details.
 *
 */


#include "ssb_private.h"

#include <linux/ssb/ssb.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/mmc/sdio_func.h>

/* Define the following to 1 to enable a printk on each coreswitch. */
#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG  0


/* Hardware invariants CIS tuples */
#define SSB_SDIO_CIS   0x80
#define  SSB_SDIO_CIS_SROMREV  0x00
#define  SSB_SDIO_CIS_ID  0x01
#define  SSB_SDIO_CIS_BOARDREV  0x02
#define  SSB_SDIO_CIS_PA  0x03
#define   SSB_SDIO_CIS_PA_PA0B0_LO 0
#define   SSB_SDIO_CIS_PA_PA0B0_HI 1
#define   SSB_SDIO_CIS_PA_PA0B1_LO 2
#define   SSB_SDIO_CIS_PA_PA0B1_HI 3
#define   SSB_SDIO_CIS_PA_PA0B2_LO 4
#define   SSB_SDIO_CIS_PA_PA0B2_HI 5
#define   SSB_SDIO_CIS_PA_ITSSI  6
#define   SSB_SDIO_CIS_PA_MAXPOW 7
#define  SSB_SDIO_CIS_OEMNAME  0x04
#define  SSB_SDIO_CIS_CCODE  0x05
#define  SSB_SDIO_CIS_ANTENNA  0x06
#define  SSB_SDIO_CIS_ANTGAIN  0x07
#define  SSB_SDIO_CIS_BFLAGS  0x08
#define  SSB_SDIO_CIS_LEDS  0x09

#define CISTPL_FUNCE_LAN_NODE_ID        0x04 /* same as in PCMCIA */


/*
 * Function 1 miscellaneous registers.
 *
 * Definitions match src/include/sbsdio.h from the
 * Android Open Source Project
 * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
 *
 */

#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */
#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */
#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */

/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */
#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */
#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */

#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */

/* REVISIT: this flag doesn't seem to matter */
#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */


/*
 * Address map within the SDIO function address space (128K).
 *
 *   Start   End     Description
 *   ------- ------- ------------------------------------------
 *   0x00000 0x0ffff selected backplane address window (64K)
 *   0x10000 0x1ffff backplane control registers (max 64K)
 *
 * The current address window is configured by writing to registers
 * SBADDRLOW, SBADDRMID and SBADDRHIGH.
 *
 * In order to access the contents of a 32-bit Silicon Backplane address
 * the backplane address window must be first loaded with the highest
 * 16 bits of the target address. Then, an access must be done to the
 * SDIO function address space using the lower 15 bits of the address.
 * Bit 15 of the address must be set when doing 32 bit accesses.
 *
 * 10987654321098765432109876543210
 * WWWWWWWWWWWWWWWWW                 SB Address Window
 *                 OOOOOOOOOOOOOOOO  Offset within SB Address Window
 *                 a                 32-bit access flag
 */



/*
 * SSB I/O via SDIO.
 *
 * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
 */


static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
{
 return &bus->host_sdio->dev;
}

/* host claimed */
static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
{
 int error = 0;

 sdio_writeb(bus->host_sdio, val, addr, &error);
 if (unlikely(error)) {
  dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
   addr, val, error);
 }

 return error;
}

#if 0
static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
{
 u8 val;
 int error = 0;

 val = sdio_readb(bus->host_sdio, addr, &error);
 if (unlikely(error)) {
  dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
   addr, val, error);
 }

 return val;
}
#endif

/* host claimed */
static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
{
 int error;

 error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
    (address >> 8) & SBSDIO_SBADDRLOW_MASK);
 if (error)
  goto out;
 error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
    (address >> 16) & SBSDIO_SBADDRMID_MASK);
 if (error)
  goto out;
 error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
    (address >> 24) & SBSDIO_SBADDRHIGH_MASK);
 if (error)
  goto out;
 bus->sdio_sbaddr = address;
out:
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
   " to 0x%08x, error %d\n", address, error);
 }

 return error;
}

/* for enumeration use only */
u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
{
 u32 val;
 int error;

 sdio_claim_host(bus->host_sdio);
 val = sdio_readl(bus->host_sdio, offset, &error);
 sdio_release_host(bus->host_sdio);
 if (unlikely(error)) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }

 return val;
}

/* for enumeration use only */
int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
{
 u32 sbaddr;
 int error;

 sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
 sdio_claim_host(bus->host_sdio);
 error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
 sdio_release_host(bus->host_sdio);
 if (error) {
  dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
   " error %d\n", coreidx, error);
  goto out;
 }
out:
 return error;
}

/* host must be already claimed */
static int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
{
 u8 coreidx = dev->core_index;
 u32 sbaddr;
 int error = 0;

 sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
 if (unlikely(bus->sdio_sbaddr != sbaddr)) {
#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
  dev_info(ssb_sdio_dev(bus),
      "switching to %s core, index %d\n",
      ssb_core_name(dev->id.coreid), coreidx);
#endif
  error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
  if (error) {
   dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
    " core %u, error %d\n", coreidx, error);
   goto out;
  }
  bus->mapped_device = dev;
 }

out:
 return error;
}

static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
{
 struct ssb_bus *bus = dev->bus;
 u8 val = 0xff;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 val = sdio_readb(bus->host_sdio, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
out:
 sdio_release_host(bus->host_sdio);

 return val;
}

static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
{
 struct ssb_bus *bus = dev->bus;
 u16 val = 0xffff;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 val = sdio_readw(bus->host_sdio, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
out:
 sdio_release_host(bus->host_sdio);

 return val;
}

static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
{
 struct ssb_bus *bus = dev->bus;
 u32 val = 0xffffffff;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
 val = sdio_readl(bus->host_sdio, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
out:
 sdio_release_host(bus->host_sdio);

 return val;
}

#ifdef CONFIG_SSB_BLOCKIO
static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
      size_t count, u16 offset, u8 reg_width)
{
 size_t saved_count = count;
 struct ssb_bus *bus = dev->bus;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev))) {
  error = -EIO;
  memset(buffer, 0xff, count);
  goto err_out;
 }
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;

 switch (reg_width) {
 case sizeof(u8): {
  error = sdio_readsb(bus->host_sdio, buffer, offset, count);
  break;
 }
 case sizeof(u16): {
  WARN_ON(count & 1);
  error = sdio_readsb(bus->host_sdio, buffer, offset, count);
  break;
 }
 case sizeof(u32): {
  WARN_ON(count & 3);
  offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
  error = sdio_readsb(bus->host_sdio, buffer, offset, count);
  break;
 }
 default:
  WARN_ON(1);
 }
 if (!error)
  goto out;

err_out:
 dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
  bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
out:
 sdio_release_host(bus->host_sdio);
}
#endif /* CONFIG_SSB_BLOCKIO */

static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
{
 struct ssb_bus *bus = dev->bus;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 sdio_writeb(bus->host_sdio, val, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
out:
 sdio_release_host(bus->host_sdio);
}

static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
{
 struct ssb_bus *bus = dev->bus;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 sdio_writew(bus->host_sdio, val, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
out:
 sdio_release_host(bus->host_sdio);
}

static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
{
 struct ssb_bus *bus = dev->bus;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev)))
  goto out;
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;
 offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
 sdio_writel(bus->host_sdio, val, offset, &error);
 if (error) {
  dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
   bus->sdio_sbaddr >> 16, offset, val, error);
 }
 if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
  sdio_readl(bus->host_sdio, 0, &error);
out:
 sdio_release_host(bus->host_sdio);
}

#ifdef CONFIG_SSB_BLOCKIO
static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
       size_t count, u16 offset, u8 reg_width)
{
 size_t saved_count = count;
 struct ssb_bus *bus = dev->bus;
 int error = 0;

 sdio_claim_host(bus->host_sdio);
 if (unlikely(ssb_sdio_switch_core(bus, dev))) {
  error = -EIO;
  goto err_out;
 }
 offset |= bus->sdio_sbaddr & 0xffff;
 offset &= SBSDIO_SB_OFT_ADDR_MASK;

 switch (reg_width) {
 case sizeof(u8):
  error = sdio_writesb(bus->host_sdio, offset,
         (void *)buffer, count);
  break;
 case sizeof(u16):
  WARN_ON(count & 1);
  error = sdio_writesb(bus->host_sdio, offset,
         (void *)buffer, count);
  break;
 case sizeof(u32):
  WARN_ON(count & 3);
  offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */
  error = sdio_writesb(bus->host_sdio, offset,
         (void *)buffer, count);
  break;
 default:
  WARN_ON(1);
 }
 if (!error)
  goto out;

err_out:
 dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
  bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
out:
 sdio_release_host(bus->host_sdio);
}

#endif /* CONFIG_SSB_BLOCKIO */

/* Not "static", as it's used in main.c */
const struct ssb_bus_ops ssb_sdio_ops = {
 .read8  = ssb_sdio_read8,
 .read16  = ssb_sdio_read16,
 .read32  = ssb_sdio_read32,
 .write8  = ssb_sdio_write8,
 .write16 = ssb_sdio_write16,
 .write32 = ssb_sdio_write32,
#ifdef CONFIG_SSB_BLOCKIO
 .block_read = ssb_sdio_block_read,
 .block_write = ssb_sdio_block_write,
#endif
};

#define GOTO_ERROR_ON(condition, description) do { \
 if (unlikely(condition)) {   \
  error_description = description; \
  goto error;    \
 }      \
  } while (0)

int ssb_sdio_get_invariants(struct ssb_bus *bus,
       struct ssb_init_invariants *iv)
{
 struct ssb_sprom *sprom = &iv->sprom;
 struct ssb_boardinfo *bi = &iv->boardinfo;
 const char *error_description = "none";
 struct sdio_func_tuple *tuple;
 void *mac;

 memset(sprom, 0xFF, sizeof(*sprom));
 sprom->boardflags_lo = 0;
 sprom->boardflags_hi = 0;

 tuple = bus->host_sdio->tuples;
 while (tuple) {
  switch (tuple->code) {
  case 0x22: /* extended function */
   switch (tuple->data[0]) {
   case CISTPL_FUNCE_LAN_NODE_ID:
    GOTO_ERROR_ON((tuple->size != 7) &&
           (tuple->data[1] != 6),
           "mac tpl size");
    /* fetch the MAC address. */
    mac = tuple->data + 2;
    memcpy(sprom->il0mac, mac, ETH_ALEN);
    memcpy(sprom->et1mac, mac, ETH_ALEN);
    break;
   default:
    break;
   }
   break;
  case 0x80: /* vendor specific tuple */
   switch (tuple->data[0]) {
   case SSB_SDIO_CIS_SROMREV:
    GOTO_ERROR_ON(tuple->size != 2,
           "sromrev tpl size");
    sprom->revision = tuple->data[1];
    break;
   case SSB_SDIO_CIS_ID:
    GOTO_ERROR_ON((tuple->size != 5) &&
           (tuple->size != 7),
           "id tpl size");
    bi->vendor = tuple->data[1] |
          (tuple->data[2]<<8);
    break;
   case SSB_SDIO_CIS_BOARDREV:
    GOTO_ERROR_ON(tuple->size != 2,
           "boardrev tpl size");
    sprom->board_rev = tuple->data[1];
    break;
   case SSB_SDIO_CIS_PA:
    GOTO_ERROR_ON((tuple->size != 9) &&
           (tuple->size != 10),
           "pa tpl size");
    sprom->pa0b0 = tuple->data[1] |
      ((u16)tuple->data[2] << 8);
    sprom->pa0b1 = tuple->data[3] |
      ((u16)tuple->data[4] << 8);
    sprom->pa0b2 = tuple->data[5] |
      ((u16)tuple->data[6] << 8);
    sprom->itssi_a = tuple->data[7];
    sprom->itssi_bg = tuple->data[7];
    sprom->maxpwr_a = tuple->data[8];
    sprom->maxpwr_bg = tuple->data[8];
    break;
   case SSB_SDIO_CIS_OEMNAME:
    /* Not present */
    break;
   case SSB_SDIO_CIS_CCODE:
    GOTO_ERROR_ON(tuple->size != 2,
           "ccode tpl size");
    sprom->country_code = tuple->data[1];
    break;
   case SSB_SDIO_CIS_ANTENNA:
    GOTO_ERROR_ON(tuple->size != 2,
           "ant tpl size");
    sprom->ant_available_a = tuple->data[1];
    sprom->ant_available_bg = tuple->data[1];
    break;
   case SSB_SDIO_CIS_ANTGAIN:
    GOTO_ERROR_ON(tuple->size != 2,
           "antg tpl size");
    sprom->antenna_gain.a0 = tuple->data[1];
    sprom->antenna_gain.a1 = tuple->data[1];
    sprom->antenna_gain.a2 = tuple->data[1];
    sprom->antenna_gain.a3 = tuple->data[1];
    break;
   case SSB_SDIO_CIS_BFLAGS:
    GOTO_ERROR_ON((tuple->size != 3) &&
           (tuple->size != 5),
           "bfl tpl size");
    sprom->boardflags_lo = tuple->data[1] |
       ((u16)tuple->data[2] << 8);
    break;
   case SSB_SDIO_CIS_LEDS:
    GOTO_ERROR_ON(tuple->size != 5,
           "leds tpl size");
    sprom->gpio0 = tuple->data[1];
    sprom->gpio1 = tuple->data[2];
    sprom->gpio2 = tuple->data[3];
    sprom->gpio3 = tuple->data[4];
    break;
   default:
    break;
   }
   break;
  default:
   break;
  }
  tuple = tuple->next;
 }

 return 0;
error:
 dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
  error_description);
 return -ENODEV;
}

void ssb_sdio_exit(struct ssb_bus *bus)
{
 if (bus->bustype != SSB_BUSTYPE_SDIO)
  return;
 /* Nothing to do here. */
}

int ssb_sdio_init(struct ssb_bus *bus)
{
 if (bus->bustype != SSB_BUSTYPE_SDIO)
  return 0;

 bus->sdio_sbaddr = ~0;

 return 0;
}

Messung V0.5
C=93 H=93 G=92

¤ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.