// SPDX-License-Identifier: GPL-2.0-only
/*
* OMAP thermal driver interface
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
* Contact:
* Eduardo Valentin <eduardo.valentin@ti.com>
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>
#include "ti-thermal.h"
#include "ti-bandgap.h"
#include "../thermal_hwmon.h"
#define TI_BANDGAP_UPDATE_INTERVAL_MS 250
/* common data structures */
struct ti_thermal_data {
struct cpufreq_policy *policy;
struct thermal_zone_device *ti_thermal;
struct thermal_zone_device *pcb_tz;
struct thermal_cooling_device *cool_dev;
struct ti_bandgap *bgp;
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
bool our_zone;
};
static void ti_thermal_work(
struct work_struct *work)
{
struct ti_thermal_data *data = container_of(work,
struct ti_thermal_data, thermal_wq);
thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
dev_dbg(data->bgp->dev,
"updated thermal zone %s\n",
thermal_zone_device_type(data->ti_thermal));
}
/**
* ti_thermal_hotspot_temperature - returns sensor extrapolated temperature
* @t: omap sensor temperature
* @s: omap sensor slope value
* @c: omap sensor const value
*/
static inline int ti_thermal_hotspot_temperature(
int t,
int s,
int c)
{
int delta = t * s / 1000 + c;
if (delta < 0)
delta = 0;
return t + delta;
}
/* thermal zone ops */
/* Get temperature callback function for thermal zone */
static inline int __ti_thermal_get_temp(
struct thermal_zone_device *tz,
int *temp)
{
struct thermal_zone_device *pcb_tz = NULL;
struct ti_thermal_data *data = thermal_zone_device_priv(tz);
struct ti_bandgap *bgp;
const struct ti_temp_sensor *s;
int ret, tmp, slope, constant;
int pcb_temp;
if (!data)
return 0;
bgp = data->bgp;
s = &bgp->conf->sensors[data->sensor_id];
ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
if (ret)
return ret;
/* Default constants */
slope = thermal_zone_get_slope(tz);
constant = thermal_zone_get_offset(tz);
pcb_tz = data->pcb_tz;
/* In case pcb zone is available, use the extrapolation rule with it */
if (!IS_ERR(pcb_tz)) {
ret = thermal_zone_get_temp(pcb_tz, &pcb_temp);
if (!ret) {
tmp -= pcb_temp;
/* got a valid PCB temp */
slope = s->slope_pcb;
constant = s->constant_pcb;
}
else {
dev_err(bgp->dev,
"Failed to read PCB state. Using defaults\n");
ret = 0;
}
}
*temp = ti_thermal_hotspot_temperature(tmp, slope, constant);
return ret;
}
static int __ti_thermal_get_trend(
struct thermal_zone_device *tz,
const struct thermal_trip *trip,
enum thermal_trend *trend)
{
struct ti_thermal_data *data = thermal_zone_device_priv(tz);
struct ti_bandgap *bgp;
int id, tr, ret = 0;
bgp = data->bgp;
id = data->sensor_id;
ret = ti_bandgap_get_trend(bgp, id, &tr);
if (ret)
return ret;
if (tr > 0)
*trend = THERMAL_TREND_RAISING;
else if (tr < 0)
*trend = THERMAL_TREND_DROPPING;
else
*trend = THERMAL_TREND_STABLE;
return 0;
}
static const struct thermal_zone_device_ops ti_of_thermal_ops = {
.get_temp = __ti_thermal_get_temp,
.get_trend = __ti_thermal_get_trend,
};
static struct ti_thermal_data
*ti_thermal_build_data(
struct ti_bandgap *bgp,
int id)
{
struct ti_thermal_data *data;
data = devm_kzalloc(bgp->dev,
sizeof(*data), GFP_KERNEL);
if (!data) {
dev_err(bgp->dev,
"kzalloc fail\n");
return NULL;
}
data->sensor_id = id;
data->bgp = bgp;
data->mode = THERMAL_DEVICE_ENABLED;
/* pcb_tz will be either valid or PTR_ERR() */
data->pcb_tz = thermal_zone_get_zone_by_name(
"pcb");
INIT_WORK(&data->thermal_wq, ti_thermal_work);
return data;
}
int ti_thermal_expose_sensor(
struct ti_bandgap *bgp,
int id,
char *domain)
{
struct ti_thermal_data *data;
data = ti_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
/* in case this is specified by DT */
data->ti_thermal = devm_thermal_of_zone_register(bgp->dev, id,
data, &ti_of_thermal_ops);
if (IS_ERR(data->ti_thermal)) {
dev_err(bgp->dev,
"thermal zone device is NULL\n");
return PTR_ERR(data->ti_thermal);
}
ti_bandgap_set_sensor_data(bgp, id, data);
ti_bandgap_write_update_interval(bgp, data->sensor_id,
TI_BANDGAP_UPDATE_INTERVAL_MS);
devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal);
return 0;
}
int ti_thermal_remove_sensor(
struct ti_bandgap *bgp,
int id)
{
struct ti_thermal_data *data;
data = ti_bandgap_get_sensor_data(bgp, id);
if (!IS_ERR_OR_NULL(data) && data->ti_thermal) {
if (data->our_zone)
thermal_zone_device_unregister(data->ti_thermal);
}
return 0;
}
int ti_thermal_report_sensor_temperature(
struct ti_bandgap *bgp,
int id)
{
struct ti_thermal_data *data;
data = ti_bandgap_get_sensor_data(bgp, id);
schedule_work(&data->thermal_wq);
return 0;
}
int ti_thermal_register_cpu_cooling(
struct ti_bandgap *bgp,
int id)
{
struct ti_thermal_data *data;
struct device_node *np = bgp->dev->of_node;
/*
* We are assuming here that if one deploys the zone
* using DT, then it must be aware that the cooling device
* loading has to happen via cpufreq driver.
*/
if (of_property_present(np,
"#thermal-sensor-cells"))
return 0;
data = ti_bandgap_get_sensor_data(bgp, id);
if (!data || IS_ERR(data))
data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
data->policy = cpufreq_cpu_get(0);
if (!data->policy) {
pr_debug(
"%s: CPUFreq policy not found\n", __func__);
return -EPROBE_DEFER;
}
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(data->policy);
if (IS_ERR(data->cool_dev)) {
int ret = PTR_ERR(data->cool_dev);
dev_err(bgp->dev,
"Failed to register cpu cooling device %d\n",
ret);
cpufreq_cpu_put(data->policy);
return ret;
}
ti_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
int ti_thermal_unregister_cpu_cooling(
struct ti_bandgap *bgp,
int id)
{
struct ti_thermal_data *data;
data = ti_bandgap_get_sensor_data(bgp, id);
if (!IS_ERR_OR_NULL(data)) {
cpufreq_cooling_unregister(data->cool_dev);
if (data->policy)
cpufreq_cpu_put(data->policy);
}
return 0;
}
