Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/w1/slaves/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  w1_ds2405.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * w1_ds2405.c
 *
 * Copyright (c) 2017 Maciej S. Szmigiero <mail@maciej.szmigiero.name>
 * Based on w1_therm.c copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
 */


#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/types.h>

#include <linux/w1.h>

#define W1_FAMILY_DS2405 0x05

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Maciej S. Szmigiero ");
MODULE_DESCRIPTION("Driver for 1-wire Dallas DS2405 PIO.");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2405));

static int w1_ds2405_select(struct w1_slave *sl, bool only_active)
{
 struct w1_master *dev = sl->master;

 u64 dev_addr = le64_to_cpu(*(u64 *)&sl->reg_num);
 unsigned int bit_ctr;

 if (w1_reset_bus(dev) != 0)
  return 0;

 /*
 * We cannot use a normal Match ROM command
 * since doing so would toggle PIO state
 */

 w1_write_8(dev, only_active ? W1_ALARM_SEARCH : W1_SEARCH);

 for (bit_ctr = 0; bit_ctr < 64; bit_ctr++) {
  int bit2send = !!(dev_addr & BIT(bit_ctr));
  u8 ret;

  ret = w1_triplet(dev, bit2send);

  if ((ret & (BIT(0) | BIT(1))) ==
      (BIT(0) | BIT(1))) /* no devices found */
   return 0;

  if (!!(ret & BIT(2)) != bit2send)
   /* wrong direction taken - no such device */
   return 0;
 }

 return 1;
}

static int w1_ds2405_read_pio(struct w1_slave *sl)
{
 if (w1_ds2405_select(sl, true))
  return 0; /* "active" means PIO is low */

 if (w1_ds2405_select(sl, false))
  return 1;

 return -ENODEV;
}

static ssize_t state_show(struct device *device,
     struct device_attribute *attr, char *buf)
{
 struct w1_slave *sl = dev_to_w1_slave(device);
 struct w1_master *dev = sl->master;

 int ret;
 ssize_t f_retval;
 u8 state;

 ret = mutex_lock_interruptible(&dev->bus_mutex);
 if (ret)
  return ret;

 if (!w1_ds2405_select(sl, false)) {
  f_retval = -ENODEV;
  goto out_unlock;
 }

 state = w1_read_8(dev);
 if (state != 0 &&
     state != 0xff) {
  dev_err(device, "non-consistent state %x\n", state);
  f_retval = -EIO;
  goto out_unlock;
 }

 *buf = state ? '1' : '0';
 f_retval = 1;

out_unlock:
 w1_reset_bus(dev);
 mutex_unlock(&dev->bus_mutex);

 return f_retval;
}

static ssize_t output_show(struct device *device,
      struct device_attribute *attr, char *buf)
{
 struct w1_slave *sl = dev_to_w1_slave(device);
 struct w1_master *dev = sl->master;

 int ret;
 ssize_t f_retval;

 ret = mutex_lock_interruptible(&dev->bus_mutex);
 if (ret)
  return ret;

 ret = w1_ds2405_read_pio(sl);
 if (ret < 0) {
  f_retval = ret;
  goto out_unlock;
 }

 *buf = ret ? '1' : '0';
 f_retval = 1;

out_unlock:
 w1_reset_bus(dev);
 mutex_unlock(&dev->bus_mutex);

 return f_retval;
}

static ssize_t output_store(struct device *device,
       struct device_attribute *attr,
       const char *buf, size_t count)
{
 struct w1_slave *sl = dev_to_w1_slave(device);
 struct w1_master *dev = sl->master;

 int ret, current_pio;
 unsigned int val;
 ssize_t f_retval;

 if (count < 1)
  return -EINVAL;

 if (sscanf(buf, " %u%n", &val, &ret) < 1)
  return -EINVAL;

 if (val != 0 && val != 1)
  return -EINVAL;

 f_retval = ret;

 ret = mutex_lock_interruptible(&dev->bus_mutex);
 if (ret)
  return ret;

 current_pio = w1_ds2405_read_pio(sl);
 if (current_pio < 0) {
  f_retval = current_pio;
  goto out_unlock;
 }

 if (current_pio == val)
  goto out_unlock;

 if (w1_reset_bus(dev) != 0) {
  f_retval = -ENODEV;
  goto out_unlock;
 }

 /*
 * can't use w1_reset_select_slave() here since it uses Skip ROM if
 * there is only one device on bus
 */

 do {
  u64 dev_addr = le64_to_cpu(*(u64 *)&sl->reg_num);
  u8 cmd[9];

  cmd[0] = W1_MATCH_ROM;
  memcpy(&cmd[1], &dev_addr, sizeof(dev_addr));

  w1_write_block(dev, cmd, sizeof(cmd));
 } while (0);

out_unlock:
 w1_reset_bus(dev);
 mutex_unlock(&dev->bus_mutex);

 return f_retval;
}

static DEVICE_ATTR_RO(state);
static DEVICE_ATTR_RW(output);

static struct attribute *w1_ds2405_attrs[] = {
 &dev_attr_state.attr,
 &dev_attr_output.attr,
 NULL
};

ATTRIBUTE_GROUPS(w1_ds2405);

static const struct w1_family_ops w1_ds2405_fops = {
 .groups = w1_ds2405_groups
};

static struct w1_family w1_family_ds2405 = {
 .fid = W1_FAMILY_DS2405,
 .fops = &w1_ds2405_fops
};

module_w1_family(w1_family_ds2405);

Messung V0.5
C=97 H=93 G=94

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.