Quellcodebibliothek Statistik Leitseite products/Sources/formale Sprachen/C/Linux/drivers/w1/slaves/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  w1_ds2413.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * w1_ds2413.c - w1 family 3a (DS2413) driver
 * based on w1_ds2408.c by Jean-Francois Dagenais <dagenaisj@sonatest.com>
 *
 * Copyright (c) 2013 Mariusz Bialonczyk <manio@skyboo.net>
 */


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/slab.h>

#include <linux/w1.h>

#define W1_FAMILY_DS2413 0x3A

#define W1_F3A_RETRIES                     3
#define W1_F3A_FUNC_PIO_ACCESS_READ        0xF5
#define W1_F3A_FUNC_PIO_ACCESS_WRITE       0x5A
#define W1_F3A_SUCCESS_CONFIRM_BYTE        0xAA
#define W1_F3A_INVALID_PIO_STATE           0xFF

static ssize_t state_read(struct file *filp, struct kobject *kobj,
     const struct bin_attribute *bin_attr, char *buf,
     loff_t off, size_t count)
{
 struct w1_slave *sl = kobj_to_w1_slave(kobj);
 unsigned int retries = W1_F3A_RETRIES;
 ssize_t bytes_read = -EIO;
 u8 state;

 dev_dbg(&sl->dev,
  "Reading %s kobj: %p, off: %0#10x, count: %zu, buff addr: %p",
  bin_attr->attr.name, kobj, (unsigned int)off, count, buf);

 if (off != 0)
  return 0;
 if (!buf)
  return -EINVAL;

 mutex_lock(&sl->master->bus_mutex);
 dev_dbg(&sl->dev, "mutex locked");

next:
 if (w1_reset_select_slave(sl))
  goto out;

 while (retries--) {
  w1_write_8(sl->master, W1_F3A_FUNC_PIO_ACCESS_READ);

  state = w1_read_8(sl->master);
  if ((state & 0x0F) == ((~state >> 4) & 0x0F)) {
   /* complement is correct */
   *buf = state;
   bytes_read = 1;
   goto out;
  } else if (state == W1_F3A_INVALID_PIO_STATE) {
   /* slave didn't respond, try to select it again */
   dev_warn(&sl->dev, "slave device did not respond to PIO_ACCESS_READ, " \
         "reselecting, retries left: %d\n", retries);
   goto next;
  }

  if (w1_reset_resume_command(sl->master))
   goto out; /* unrecoverable error */

  dev_warn(&sl->dev, "PIO_ACCESS_READ error, retries left: %d\n", retries);
 }

out:
 mutex_unlock(&sl->master->bus_mutex);
 dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n",
  (bytes_read > 0) ? "succeeded" : "error", retries);
 return bytes_read;
}

static const BIN_ATTR_RO(state, 1);

static ssize_t output_write(struct file *filp, struct kobject *kobj,
       const struct bin_attribute *bin_attr, char *buf,
       loff_t off, size_t count)
{
 struct w1_slave *sl = kobj_to_w1_slave(kobj);
 u8 w1_buf[3];
 unsigned int retries = W1_F3A_RETRIES;
 ssize_t bytes_written = -EIO;

 if (count != 1 || off != 0)
  return -EFAULT;

 dev_dbg(&sl->dev, "locking mutex for write_output");
 mutex_lock(&sl->master->bus_mutex);
 dev_dbg(&sl->dev, "mutex locked");

 if (w1_reset_select_slave(sl))
  goto out;

 /*
 * according to the DS2413 datasheet the most significant 6 bits
 * should be set to "1"s, so do it now
 */

 *buf = *buf | 0xFC;

 while (retries--) {
  w1_buf[0] = W1_F3A_FUNC_PIO_ACCESS_WRITE;
  w1_buf[1] = *buf;
  w1_buf[2] = ~(*buf);
  w1_write_block(sl->master, w1_buf, 3);

  if (w1_read_8(sl->master) == W1_F3A_SUCCESS_CONFIRM_BYTE) {
   bytes_written = 1;
   goto out;
  }
  if (w1_reset_resume_command(sl->master))
   goto out; /* unrecoverable error */

  dev_warn(&sl->dev, "PIO_ACCESS_WRITE error, retries left: %d\n", retries);
 }

out:
 mutex_unlock(&sl->master->bus_mutex);
 dev_dbg(&sl->dev, "%s, mutex unlocked, retries: %d\n",
  (bytes_written > 0) ? "succeeded" : "error", retries);
 return bytes_written;
}

static const BIN_ATTR(output, 0664, NULL, output_write, 1);

static const struct bin_attribute *const w1_f3a_bin_attrs[] = {
 &bin_attr_state,
 &bin_attr_output,
 NULL,
};

static const struct attribute_group w1_f3a_group = {
 .bin_attrs = w1_f3a_bin_attrs,
};

static const struct attribute_group *w1_f3a_groups[] = {
 &w1_f3a_group,
 NULL,
};

static const struct w1_family_ops w1_f3a_fops = {
 .groups  = w1_f3a_groups,
};

static struct w1_family w1_family_3a = {
 .fid = W1_FAMILY_DS2413,
 .fops = &w1_f3a_fops,
};
module_w1_family(w1_family_3a);

MODULE_AUTHOR("Mariusz Bialonczyk ");
MODULE_DESCRIPTION("w1 family 3a driver for DS2413 2 Pin IO");
MODULE_LICENSE("GPL");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2413));

Messung V0.5
C=98 H=97 G=97

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.