/* Time To Live of broadcast messages */ #define BATADV_TTL 50
/* maximum sequence number age of broadcast messages */ #define BATADV_BCAST_MAX_AGE 64
/* purge originators after time in seconds if no valid packet comes in * -> TODO: check influence on BATADV_TQ_LOCAL_WINDOW_SIZE
*/ #define BATADV_PURGE_TIMEOUT 200000 /* 200 seconds */ #define BATADV_TT_LOCAL_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_ROAM_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_CLIENT_TEMP_TIMEOUT 600000 /* in milliseconds */ #define BATADV_TT_WORK_PERIOD 5000 /* 5 seconds */ #define BATADV_ORIG_WORK_PERIOD 1000 /* 1 second */ #define BATADV_MCAST_WORK_PERIOD 500 /* 0.5 seconds */ #define BATADV_DAT_ENTRY_TIMEOUT (5 * 60000) /* 5 mins in milliseconds */ /* sliding packet range of received originator messages in sequence numbers * (should be a multiple of our word size)
*/ #define BATADV_TQ_LOCAL_WINDOW_SIZE 64 /* milliseconds we have to keep pending tt_req */ #define BATADV_TT_REQUEST_TIMEOUT 3000
/* number of OGMs sent with the last tt diff */ #define BATADV_TT_OGM_APPEND_MAX 3
/* Time in which a client can roam at most ROAMING_MAX_COUNT times in * milliseconds
*/ #define BATADV_ROAMING_MAX_TIME 20000 #define BATADV_ROAMING_MAX_COUNT 5
#define BATADV_NO_FLAGS 0
#define BATADV_NULL_IFINDEX 0 /* dummy ifindex used to avoid iface checks */
#define BATADV_NO_MARK 0
/* default interface for multi interface operation. The default interface is * used for communication which originated locally (i.e. is not forwarded) * or where special forwarding is not desired/necessary.
*/ #define BATADV_IF_DEFAULT ((struct batadv_hard_iface *)NULL)
#define BATADV_LOG_BUF_LEN 8192 /* has to be a power of 2 */
/* number of packets to send for broadcasts on different interface types */ #define BATADV_NUM_BCASTS_DEFAULT 1 #define BATADV_NUM_BCASTS_WIRELESS 3
/* length of the single packet used by the TP meter */ #define BATADV_TP_PACKET_LEN ETH_DATA_LEN
/* msecs after which an ARP_REQUEST is sent in broadcast as fallback */ #define ARP_REQ_DELAY 250 /* numbers of originator to contact for any PUT/GET DHT operation */ #define BATADV_DAT_CANDIDATES_NUM 3
/* BATADV_TQ_SIMILARITY_THRESHOLD - TQ points that a secondary metric can differ * at most from the primary one in order to be still considered acceptable
*/ #define BATADV_TQ_SIMILARITY_THRESHOLD 50
/** * BATADV_TP_MAX_NUM - maximum number of simultaneously active tp sessions
*/ #define BATADV_TP_MAX_NUM 5
/** * enum batadv_mesh_state - State of a mesh interface
*/ enum batadv_mesh_state { /** @BATADV_MESH_INACTIVE: mesh interface is not yet running */
BATADV_MESH_INACTIVE,
/** @BATADV_MESH_ACTIVE: interface is up and running */
BATADV_MESH_ACTIVE,
/** @BATADV_MESH_DEACTIVATING: interface is getting shut down */
BATADV_MESH_DEACTIVATING,
};
/* Number of fragment chains for each orig_node */ #define BATADV_FRAG_BUFFER_COUNT 8 /* Maximum number of fragments for one packet */ #define BATADV_FRAG_MAX_FRAGMENTS 16 /* Maxumim size of each fragment */ #define BATADV_FRAG_MAX_FRAG_SIZE 1280 /* Time to keep fragments while waiting for rest of the fragments */ #define BATADV_FRAG_TIMEOUT 10000
/** * batadv_print_vid() - return printable version of vid information * @vid: the VLAN identifier * * Return: -1 when no VLAN is used, VLAN id otherwise
*/ staticinlineint batadv_print_vid(unsignedshort vid)
{ if (vid & BATADV_VLAN_HAS_TAG) return (int)(vid & VLAN_VID_MASK); else return -1;
}
int batadv_mesh_init(struct net_device *mesh_iface); void batadv_mesh_free(struct net_device *mesh_iface); bool batadv_is_my_mac(struct batadv_priv *bat_priv, const u8 *addr); int batadv_max_header_len(void); void batadv_skb_set_priority(struct sk_buff *skb, int offset); int batadv_batman_skb_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev); int
batadv_recv_handler_register(u8 packet_type, int (*recv_handler)(struct sk_buff *, struct batadv_hard_iface *)); void batadv_recv_handler_unregister(u8 packet_type);
__be32 batadv_skb_crc32(struct sk_buff *skb, u8 *payload_ptr);
/** * batadv_compare_eth() - Compare two not u16 aligned Ethernet addresses * @data1: Pointer to a six-byte array containing the Ethernet address * @data2: Pointer other six-byte array containing the Ethernet address * * note: can't use ether_addr_equal() as it requires aligned memory * * Return: true if they are the same ethernet addr
*/ staticinlinebool batadv_compare_eth(constvoid *data1, constvoid *data2)
{ return ether_addr_equal_unaligned(data1, data2);
}
/** * batadv_has_timed_out() - compares current time (jiffies) and timestamp + * timeout * @timestamp: base value to compare with (in jiffies) * @timeout: added to base value before comparing (in milliseconds) * * Return: true if current time is after timestamp + timeout
*/ staticinlinebool batadv_has_timed_out(unsignedlong timestamp, unsignedint timeout)
{ return time_is_before_jiffies(timestamp + msecs_to_jiffies(timeout));
}
/** * batadv_atomic_dec_not_zero() - Decrease unless the number is 0 * @v: pointer of type atomic_t * * Return: non-zero if v was not 0, and zero otherwise.
*/ #define batadv_atomic_dec_not_zero(v) atomic_add_unless((v), -1, 0)
/** * batadv_smallest_signed_int() - Returns the smallest signed integer in two's * complement with the sizeof x * @x: type of integer * * Return: smallest signed integer of type
*/ #define batadv_smallest_signed_int(x) (1u << (7u + 8u * (sizeof(x) - 1u)))
/** * batadv_seq_before() - Checks if a sequence number x is a predecessor of y * @x: potential predecessor of @y * @y: value to compare @x against * * It handles overflows/underflows and can correctly check for a predecessor * unless the variable sequence number has grown by more than * 2**(bitwidth(x)-1)-1. * * This means that for a u8 with the maximum value 255, it would think: * * * when adding nothing - it is neither a predecessor nor a successor * * before adding more than 127 to the starting value - it is a predecessor, * * when adding 128 - it is neither a predecessor nor a successor, * * after adding more than 127 to the starting value - it is a successor * * Return: true when x is a predecessor of y, false otherwise
*/ #define batadv_seq_before(x, y) ({ \
typeof(x)_d1 = (x); \
typeof(y)_d2 = (y); \
typeof(x)_dummy = (_d1 - _d2); \
(void)(&_d1 == &_d2); \
_dummy > batadv_smallest_signed_int(_dummy); \
})
/** * batadv_seq_after() - Checks if a sequence number x is a successor of y * @x: potential successor of @y * @y: value to compare @x against * * It handles overflows/underflows and can correctly check for a successor * unless the variable sequence number has grown by more than * 2**(bitwidth(x)-1)-1. * * This means that for a u8 with the maximum value 255, it would think: * * * when adding nothing - it is neither a predecessor nor a successor * * before adding more than 127 to the starting value - it is a predecessor, * * when adding 128 - it is neither a predecessor nor a successor, * * after adding more than 127 to the starting value - it is a successor * * Return: true when x is a successor of y, false otherwise
*/ #define batadv_seq_after(x, y) batadv_seq_before(y, x)
/** * batadv_add_counter() - Add to per cpu statistics counter of mesh interface * @bat_priv: the bat priv with all the mesh interface information * @idx: counter index which should be modified * @count: value to increase counter by * * Stop preemption on local cpu while incrementing the counter
*/ staticinlinevoid batadv_add_counter(struct batadv_priv *bat_priv, size_t idx,
size_t count)
{
this_cpu_add(bat_priv->bat_counters[idx], count);
}
/** * batadv_inc_counter() - Increase per cpu statistics counter of mesh interface * @b: the bat priv with all the mesh interface information * @i: counter index which should be modified
*/ #define batadv_inc_counter(b, i) batadv_add_counter(b, i, 1)
/** * BATADV_SKB_CB() - Get batadv_skb_cb from skb control buffer * @__skb: skb holding the control buffer * * The members of the control buffer are defined in struct batadv_skb_cb in * types.h. The macro is inspired by the similar macro TCP_SKB_CB() in tcp.h. * * Return: pointer to the batadv_skb_cb of the skb
*/ #define BATADV_SKB_CB(__skb) ((struct batadv_skb_cb *)&((__skb)->cb[0]))
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.