Quelle  dml107.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML107.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * EMBEDDED COBOL (file "DML107.PCO")


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * DATE 1993/08/20 EMBEDDED COBOL LANGUAGE                          
      * NIST SQL VALIDATION TEST SUITE V6.0                          
      *  DISCLAIMER:                                                  
      *  This program was written by employees of NIST to test SQL    
      *  implementations for conformance to the SQL standards.        
      *  NIST assumes no responsibility for any party's use of        
      *  this program.
      *                                                              
      * DML107.PCO                                                    
      * WRITTEN BY:  David W. Flater                                 
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *                                                              
      * This routine tests several FIPS features in Transitional     
      * SQL.  This is the dynamic version of DML106.                 
      *                                                              
      * REFERENCES                                                   
      *   FIPS PUB 127-2 14.1 Transitional SQL                       
      *   ANSI SQL-1992                                              
      *                                                              
      ****************************************************************



           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  dstmt PIC  X(50).
       01  longst PIC  X(240).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, dml107.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0600 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0600 "
             DISPLAY " UNION in views (feature 8) (dynamic)"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 8"
             DISPLAY " ANSI SQL-1992 11.19 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'CREATE VIEW UUSIG (U1) AS ' ||
               ' SELECT C1 FROM USIG UNION SELECT C_1 FROM USIG'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT COUNT(*) FROM UUSIG"""
             MOVE "SELECT COUNT(*) FROM UUSIG
      -    " " TO dstmt

             DISPLAY "PREPARE S10711 FROM :dstmt;"
             EXEC SQL PREPARE S10711 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10711 CURSOR FOR S10711;"
             EXEC SQL DECLARE C10711 CURSOR FOR S10711 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10711;"
             EXEC SQL OPEN C10711 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10711 INTO :int1;"
             EXEC SQL FETCH C10711 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 4; its value is ", int1
             if (int1  NOT =  4) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10711;"
             EXEC SQL CLOSE C10711 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT COUNT(DISTINCT U1) FROM UUSIG"""
             MOVE "SELECT COUNT(DISTINCT U1) FROM UUSIG "
             TO dstmt

             DISPLAY "PREPARE S10712 FROM :dstmt;"
             EXEC SQL PREPARE S10712 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10712 CURSOR FOR S10712;"
             EXEC SQL DECLARE C10712 CURSOR FOR S10712 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10712;"
             EXEC SQL OPEN C10712 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10712 INTO :int1;"
             EXEC SQL FETCH C10712 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 4; its value is ", int1
             if (int1  NOT =  4) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10712;"
             EXEC SQL CLOSE C10712 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM UUSIG WHERE U1 < 0 OR ' ||
               ' U1 > 3 OR U1 IS NULL'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10713 FROM :longst;"
             EXEC SQL PREPARE S10713 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10713 CURSOR FOR S10713;"
             EXEC SQL DECLARE C10713 CURSOR FOR S10713 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10713;"
             EXEC SQL OPEN C10713 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10713 INTO :int1;"
             EXEC SQL FETCH C10713 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 0; its value is ", int1
             if (int1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10713;"
             EXEC SQL CLOSE C10713 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP VIEW UUSIG CASCADE"""
             MOVE "DROP VIEW UUSIG CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0600','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml107.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0600','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0600 ********************
      ******************** BEGIN TEST0602 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0602 "
             DISPLAY " DATETIME data types (feature 5) (dynamic)"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 5"
             DISPLAY " ANSI SQL-1992 6.1 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'CREATE TABLE TEMPUS (TDATE DATE, TTIME TIME,'||
               ' TTIMESTAMP TIMESTAMP, TINT1 INTERVAL YEAR'||
               ' TO MONTH, TINT2 INTERVAL DAY TO SECOND)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TEMPUS VALUES ('          ||
               ' DATE ''1993-08-24'','               ||
               ' TIME ''16:03:00'','                 ||
               ' TIMESTAMP ''1993-08-24 16:03:00'',' ||
               ' INTERVAL -''1-6'' YEAR TO MONTH,'   ||
               ' INTERVAL ''13 0:10'' DAY TO SECOND)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""SELECT EXTRACT (DAY FROM TDATE) FROM
      -    " TEMPUS"""
             MOVE "SELECT EXTRACT (DAY FROM TDATE) FROM TEMPUS "
             TO dstmt

             DISPLAY "PREPARE S10721 FROM :dstmt;"
             EXEC SQL PREPARE S10721 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10721 CURSOR FOR S10721;"
             EXEC SQL DECLARE C10721 CURSOR FOR S10721 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10721;"
             EXEC SQL OPEN C10721 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10721 INTO :int1;"
             EXEC SQL FETCH C10721 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 24; its value is ", int1
             if (int1  NOT =  24) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10721;"
             EXEC SQL CLOSE C10721 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TEMPUS ' ||
               ' WHERE (TTIMESTAMP - TIMESTAMP'||
               ' ''1995-02-24 16:03:00'')'||
               ' YEAR TO MONTH = TINT1'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10722 FROM :longst;"
             EXEC SQL PREPARE S10722 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10722 CURSOR FOR S10722;"
             EXEC SQL DECLARE C10722 CURSOR FOR S10722 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10722;"
             EXEC SQL OPEN C10722 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10722 INTO :int1;"
             EXEC SQL FETCH C10722 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10722;"
             EXEC SQL CLOSE C10722 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Overlaps TEd hook #1 

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TEMPUS '           ||
               ' WHERE (TTIMESTAMP, TINT1) OVERLAPS '  ||
               ' (TIMESTAMP ''1995-02-24 16:03:00'', ' ||
               ' INTERVAL ''1-6'' YEAR TO MONTH)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10723 FROM :longst;"
             EXEC SQL PREPARE S10723 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10723 CURSOR FOR S10723;"
             EXEC SQL DECLARE C10723 CURSOR FOR S10723 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10723;"
             EXEC SQL OPEN C10723 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10723 INTO :int1;"
             EXEC SQL FETCH C10723 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 0; its value is ", int1
             if (int1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10723;"
             EXEC SQL CLOSE C10723 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Overlaps TEd hook #2 

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP TABLE TEMPUS CASCADE"""
             MOVE "DROP TABLE TEMPUS CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0602','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml107.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0602','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0602 ********************
      ******************** BEGIN TEST0612 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0612 "
             DISPLAY " FIPS sizing, DATETIME data types (dynamic)"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 5"
             DISPLAY " ANSI SQL-1992 6.1 SR.25-26"
             DISPLAY " LR.1.a"
             DISPLAY " 10.1 SR 3&4"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *6.1 LR.1.a denies us the right to use <time precision> or  
      *<timestamp precision> in the declaration.  SR.25 says that 
      *<time precision> defaults to 0 and <timestamp precision>   
      *defaults to 6.                                             

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'CREATE TABLE TSFIPS ('               ||
               ' FIPS1 TIME,'                       ||
               ' FIPS2 TIMESTAMP,'                  ||
               ' FIPS3 INTERVAL YEAR (2) TO MONTH,' ||
               ' FIPS4 INTERVAL DAY (2) TO SECOND (6))'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSFIPS VALUES ('                      ||
               ' TIME ''16:03:00'','                             ||
               ' TIMESTAMP ''1996-08-24 16:03:00.999999'','      ||
               ' INTERVAL -''99-6'' YEAR (2) TO MONTH,'          ||
               ' INTERVAL ''99 0:10:00.999999'' DAY (2) TO SECOND (6))'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT EXTRACT (SECOND FROM FIPS2)' ||
               ' * 1000000 - 999990 FROM TSFIPS'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10732 FROM :longst;"
             EXEC SQL PREPARE S10732 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10732 CURSOR FOR S10732;"
             EXEC SQL DECLARE C10732 CURSOR FOR S10732 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10732;"
             EXEC SQL OPEN C10732 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10732 INTO :int1;"
             EXEC SQL FETCH C10732 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 9; its value is ", int1
             if (int1  NOT =  9) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10732;"
             EXEC SQL CLOSE C10732 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT EXTRACT (YEAR FROM FIPS3),'        ||
               ' EXTRACT (MONTH FROM FIPS3) FROM TSFIPS'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10733 FROM :longst;"
             EXEC SQL PREPARE S10733 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10733 CURSOR FOR S10733;"
             EXEC SQL DECLARE C10733 CURSOR FOR S10733 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10733;"
             EXEC SQL OPEN C10733 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             COMPUTE int2 = -1
             DISPLAY "FETCH C10733 INTO :int1, :int2;"
             EXEC SQL FETCH C10733 INTO :int1, :int2 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be -99; its value is ", int1
             DISPLAY "int2 should be -6; its value is ", int2
             DISPLAY "Note: The sign is specified by Subclause 6.6
      -    " GR.3.1"
             DISPLAY " in ANSI SQL-1992."
             if (int1  NOT =  -99  OR  int2  NOT =  -6) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10733;"
             EXEC SQL CLOSE C10733 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT EXTRACT (DAY FROM FIPS4),' ||
               ' EXTRACT (SECOND FROM FIPS4)'    ||
               ' * 1000000 - 999990 FROM TSFIPS'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10734 FROM :longst;"
             EXEC SQL PREPARE S10734 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10734 CURSOR FOR S10734;"
             EXEC SQL DECLARE C10734 CURSOR FOR S10734 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10734;"
             EXEC SQL OPEN C10734 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             COMPUTE int2 = -1
             DISPLAY "FETCH C10734 INTO :int1, :int2;"
             EXEC SQL FETCH C10734 INTO :int1, :int2 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 99; its value is ", int1
             DISPLAY "int2 should be 9; its value is ", int2
             if (int1  NOT =  99  OR  int2  NOT =  9) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10734;"
             EXEC SQL CLOSE C10734 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP TABLE TSFIPS CASCADE"""
             MOVE "DROP TABLE TSFIPS CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0612','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml107.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0612','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0612 ********************
      ******************** BEGIN TEST0614 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0614 "
             DISPLAY " (dynamic)"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 5, 20"
             DISPLAY " ANSI SQL-1992 6.8 "
             DISPLAY " 6.8 GR.3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Support for timezones is not included in Transitional SQL 

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'CREATE TABLE TSSMALL ('    ||
               ' SMALLD DATE,'            ||
               ' SMALLT TIME,'            ||
               ' SMALLTS TIMESTAMP)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSSMALL VALUES (' ||
               ' CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TSSMALL WHERE' ||
               ' EXTRACT (YEAR FROM SMALLD) = EXTRACT'||
               ' (YEAR FROM SMALLTS)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10741 FROM :longst;"
             EXEC SQL PREPARE S10741 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10741 CURSOR FOR S10741;"
             EXEC SQL DECLARE C10741 CURSOR FOR S10741 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10741;"
             EXEC SQL OPEN C10741 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10741 INTO :int1;"
             EXEC SQL FETCH C10741 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10741;"
             EXEC SQL CLOSE C10741 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TSSMALL WHERE' ||
               ' EXTRACT (MONTH FROM SMALLD) = EXTRACT'||
               ' (MONTH FROM SMALLTS)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10742 FROM :longst;"
             EXEC SQL PREPARE S10742 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10742 CURSOR FOR S10742;"
             EXEC SQL DECLARE C10742 CURSOR FOR S10742 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10742;"
             EXEC SQL OPEN C10742 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10742 INTO :int1;"
             EXEC SQL FETCH C10742 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10742;"
             EXEC SQL CLOSE C10742 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TSSMALL WHERE' ||
               ' EXTRACT (DAY FROM SMALLD) = EXTRACT'||
               ' (DAY FROM SMALLTS)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10743 FROM :longst;"
             EXEC SQL PREPARE S10743 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10743 CURSOR FOR S10743;"
             EXEC SQL DECLARE C10743 CURSOR FOR S10743 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10743;"
             EXEC SQL OPEN C10743 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10743 INTO :int1;"
             EXEC SQL FETCH C10743 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10743;"
             EXEC SQL CLOSE C10743 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TSSMALL WHERE' ||
               ' EXTRACT (HOUR FROM SMALLT) = EXTRACT'||
               ' (HOUR FROM SMALLTS)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10744 FROM :longst;"
             EXEC SQL PREPARE S10744 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10744 CURSOR FOR S10744;"
             EXEC SQL DECLARE C10744 CURSOR FOR S10744 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10744;"
             EXEC SQL OPEN C10744 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10744 INTO :int1;"
             EXEC SQL FETCH C10744 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10744;"
             EXEC SQL CLOSE C10744 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*) FROM TSSMALL WHERE' ||
               ' EXTRACT (MINUTE FROM SMALLT) = EXTRACT' || 
               ' (MINUTE FROM SMALLTS)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10745 FROM :longst;"
             EXEC SQL PREPARE S10745 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10745 CURSOR FOR S10745;"
             EXEC SQL DECLARE C10745 CURSOR FOR S10745 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10745;"
             EXEC SQL OPEN C10745 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10745 INTO :int1;"
             EXEC SQL FETCH C10745 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10745;"
             EXEC SQL CLOSE C10745 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'SELECT COUNT(*)' ||
               ' FROM TSSMALL WHERE' ||
               ' EXTRACT (SECOND FROM SMALLT) -' ||
               ' EXTRACT (SECOND FROM SMALLTS) > -1' ||
               ' AND EXTRACT (SECOND FROM SMALLT) -' ||
               ' EXTRACT (SECOND FROM SMALLTS) < 1'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "PREPARE S10746 FROM :longst;"
             EXEC SQL PREPARE S10746 FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C10746 CURSOR FOR S10746;"
             EXEC SQL DECLARE C10746 CURSOR FOR S10746 END-EXEC
             DISPLAY  " "

             DISPLAY "OPEN C10746;"
             EXEC SQL OPEN C10746 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "FETCH C10746 INTO :int1;"
             EXEC SQL FETCH C10746 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C10746;"
             EXEC SQL CLOSE C10746 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP TABLE TSSMALL CASCADE"""
             MOVE "DROP TABLE TSSMALL CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0614','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml107.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0614','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0614 ********************
      ******************** BEGIN TEST0616 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0616 "
             DISPLAY " DATETIME-related SQLSTATE codes (dynamic)"
             DISPLAY "References:"
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
      -    " 1, 5, 20"
             DISPLAY " ANSI SQL-1992 22.1 SQLSTATE"
             DISPLAY " 6.14 GR.3.c"
             DISPLAY " 9.2 GR.3.m"
             DISPLAY " COR1 for 6.10 GR.9.a.ii GR.10.a.ii GR.11.a.ii"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Datetime field overflow = 22008:  add a one-year interval to   
      *    YEAR 9999 datetime (6.14 GR.3.c)                           
      *Interval field overflow = 22015:  insert interval with too     
      *    many digits in leading field (9.2 GR.3.m)                  
      *Invalid datetime format = 22007:  cast February 30 to datetime 
      *    (COR1 for 6.10 GR 9.a.ii, 10.a.ii, 11.a.ii)                

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'CREATE TABLE TSERR ('                 ||
               ' BADINT INTERVAL YEAR (2) TO MONTH,' ||
               ' BADDATE DATE)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *                   NOTICE                             
      *The Standard is very clear on the fact that the YEAR  
      *field can't accept values below 1 or above 9999 in    
      *datetime items (see Table 10 and 6.14 GR.3.c).        
      *However, since it seems to us that a reasonable       
      *human being might want to implement YEAR with a       
      *small integer and permit the larger range to be used, 
      *you may replace the 9999 in the date literal below    
      *with as large an integer as you require to generate   
      *the specified error condition.  This offer is null    
      *and void if the range limitation on YEAR is upheld by 
      *an official interpretation.                           

      *DML107 TEd Hook #1 

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSERR VALUES ('           ||
               ' INTERVAL ''0-11'' YEAR TO MONTH,'   ||
               ' DATE ''9999-01-01'' + INTERVAL ''1-00'''||
               ' YEAR TO MONTH)'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

      *DML107 TEd Hook #2 

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SQLSTATE should be 22008; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22008") then
               MOVE 0 TO flag
             END-IF

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSERR VALUES ('               ||
               ' INTERVAL ''9999-11'' YEAR TO MONTH,'    ||
               ' DATE ''1984-01-01'')'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SQLSTATE should be 22015; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22015") then
               MOVE 0 TO flag
             END-IF

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSERR VALUES ('         ||
               ' INTERVAL ''1-11'' YEAR TO MONTH,' ||
               ' CAST (''DATE ''''1993-02-30'''''' AS DATE))'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SQLSTATE should be 22007; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22007") then
               MOVE 0 TO flag
             END-IF

      *The above could be passed for the wrong reason if the uglified 
      *syntax is not supported.  Repeat with shorter syntax.          

             EXEC SQL DELETE FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CONCATBUF VALUES (
               'INSERT INTO TSERR VALUES ('         ||
               ' INTERVAL ''1-11'' YEAR TO MONTH,' ||
               ' CAST (''1993-02-30'' AS DATE))'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "longst=""", longst """"

             DISPLAY "EXECUTE IMMEDIATE :longst;"
             EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SQLSTATE should be 22007; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22007") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "dstmt=""DROP TABLE TSERR CASCADE"""
             MOVE "DROP TABLE TSERR CASCADE "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0616','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml107.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0616','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0616 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.