Quelle yts788.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS788.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "YTS788.SCO") calling SQL
      * procedures in file "YTS788.MCO".

      *Copyright 1996 National Computing Centre Limited,
      *and Computer Logic R&D S.A
      *on behalf of the CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * YTS788.SCO
      * WRITTEN BY:  Susan Watters
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * CREATE CHARACTER SET, implicit default collation
      *
      *
      * REFERENCES
      *   11.28      <character set definition>
      *   21.2.18    CHARACTER_SETS view
      *   F#45       Character set definition
      *   F#2        Basic information schema
      *
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-03-21
      *   Added rollback after authid
      *   Removed EXEC SQL from printf
      *   Fixed SDL transactions
      *   Removed broken code for multiple TEST_SETs
      *   Made select criteria specific to avoid multiple TEST_SETs
      *   Cleaned up
      *   More feedback
      *   Fixed broken pass criteria
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  form1 PIC  X(128).
       01  form2 PIC  X(128).
       01  num1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  num2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  cat1 PIC  X(128).
       01  cat2 PIC  X(128).
       01  schem1 PIC  X(128).
       01  schem2 PIC  X(128).
       01  name1 PIC  X(128).
       01  name2 PIC  X(128).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  j PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, yts788.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7522 *******************
             MOVE 1 TO flag
             MOVE 1 TO flag2

             DISPLAY " TEST7522 "
             DISPLAY " CREATE CHARACTER SET, implicit default
      -    " collation"
             DISPLAY "References:"
             DISPLAY " 11.28 "
             DISPLAY " 21.2.18 CHARACTER_SETS view"
             DISPLAY " F#45 Charater set definition"
             DISPLAY " F#2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *initialise host variables
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cat1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO cat2
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO form1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO form2
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO name1
              MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO name2
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO schem1
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
      -      "xxxxxxxx" TO schem2
             COMPUTE num1 = -1
             COMPUTE num2 = -1

      *see how many domains of type TEST_SET already exist

             MOVE 99 TO i
             DISPLAY "SELECT COUNT (*) INTO :i"
             DISPLAY "FROM INFORMATION_SCHEMA.CHARACTER_SETS"
             DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'CTS1'"
             DISPLAY "AND CHARACTER_SET_NAME = 'TEST_SET';"
      *  EXEC SQL SELECT COUNT (*) INTO :i
      *    FROM INFORMATION_SCHEMA.CHARACTER_SETS
      *    WHERE CHARACTER_SET_SCHEMA = 'CTS1'
      *    AND CHARACTER_SET_NAME = 'TEST_SET';
             CALL "SUB3" USING SQLCODE SQLSTATE i
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "i should be 0; its value is ", i
             if (i  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "CREATE CHARACTER SET test_set GET SQL_TEXT;"
      *  EXEC SQL CREATE CHARACTER SET test_set GET SQL_TEXT
      * ;
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *check that a row appears in CHARACTER_SETS view
      *which corresponds to the new CHARACTER_SET

             MOVE 99 TO i
             DISPLAY "SELECT COUNT (*) INTO :i"
             DISPLAY "FROM INFORMATION_SCHEMA.CHARACTER_SETS"
             DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'CTS1'"
             DISPLAY "AND CHARACTER_SET_NAME = 'TEST_SET';"
      *  EXEC SQL SELECT COUNT (*) INTO :i
      *    FROM INFORMATION_SCHEMA.CHARACTER_SETS
      *    WHERE CHARACTER_SET_SCHEMA = 'CTS1'
      *    AND CHARACTER_SET_NAME = 'TEST_SET';
             CALL "SUB7" USING SQLCODE SQLSTATE i
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "i should be 1; its value is ", i
             if (i  NOT =  1) then
               MOVE 0 TO flag
             END-IF

      *check row inserted in CHARACTER_SETS view is correct

      *return new row for test_set

             DISPLAY "The following two selects should return the same
      -    " results."

             DISPLAY "SELECT FORM_OF_USE, NUMBER_OF_CHARACTERS,"
             DISPLAY "DEFAULT_COLLATE_CATALOG, DEFAULT_COLLATE_SCHEMA,"
             DISPLAY "DEFAULT_COLLATE_NAME "
             DISPLAY "INTO :form1, :num1, :cat1, :schem1, :name1"
             DISPLAY "FROM INFORMATION_SCHEMA.CHARACTER_SETS"
             DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'CTS1'"
             DISPLAY "AND CHARACTER_SET_NAME = 'TEST_SET';"
      *  EXEC SQL SELECT FORM_OF_USE, NUMBER_OF_CHARACTERS,
      *    DEFAULT_COLLATE_CATALOG, DEFAULT_COLLATE_SCHEMA,
      *    DEFAULT_COLLATE_NAME
      *    INTO :form1, :num1, :cat1, :schem1, :name1
      *    FROM INFORMATION_SCHEMA.CHARACTER_SETS
      *    WHERE CHARACTER_SET_SCHEMA = 'CTS1'
      *    AND CHARACTER_SET_NAME = 'TEST_SET';
             CALL "SUB8" USING SQLCODE SQLSTATE form1 num1 cat1 schem1
             name1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *get row for SQL_TEXT - should contain same as new row

             DISPLAY "SELECT FORM_OF_USE, NUMBER_OF_CHARACTERS,"
             DISPLAY "DEFAULT_COLLATE_CATALOG, DEFAULT_COLLATE_SCHEMA,"
             DISPLAY "DEFAULT_COLLATE_NAME "
             DISPLAY "INTO :form2, :num2, :cat2, :schem2, :name2"
             DISPLAY "FROM INFORMATION_SCHEMA.CHARACTER_SETS"
             DISPLAY "WHERE CHARACTER_SET_SCHEMA = 'INFORMATION_SCHEMA'"
             DISPLAY "AND CHARACTER_SET_NAME = 'SQL_TEXT';"
      *  EXEC SQL SELECT FORM_OF_USE, NUMBER_OF_CHARACTERS,
      *    DEFAULT_COLLATE_CATALOG, DEFAULT_COLLATE_SCHEMA,
      *    DEFAULT_COLLATE_NAME
      *    INTO :form2, :num2, :cat2, :schem2, :name2
      *    FROM INFORMATION_SCHEMA.CHARACTER_SETS
      *    WHERE CHARACTER_SET_SCHEMA = 'INFORMATION_SCHEMA'
      *    AND CHARACTER_SET_NAME = 'SQL_TEXT';
             CALL "SUB9" USING SQLCODE SQLSTATE form2 num2 cat2 schem2
             name2
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "Comparing values...."
      *check SQL_TEST and new row contain the same values
             if (form1  NOT  =   form2) then
               MOVE 0 TO flag2
             END-IF

             if (num1  NOT =  num2) then
               MOVE 0 TO flag2
             END-IF

             if (cat1  NOT  =   cat2) then
               MOVE 0 TO flag2
             END-IF

             if (schem1  NOT  =   schem2) then
               MOVE 0 TO flag2
             END-IF

             if (name1  NOT  =   name2) then
               MOVE 0 TO flag2
             END-IF

             if (flag2  =  0) then
               DISPLAY "Values do not match"
               DISPLAY "form1 is ", form1
               DISPLAY "num1 is ", num1
               DISPLAY "cat1 is ", cat1
               DISPLAY "schem1 is ", schem1
               DISPLAY "name1 is ", name1
               DISPLAY "form2 is ", form2
               DISPLAY "num2 is ", num2
               DISPLAY "cat2 is ", cat2
               DISPLAY "schem2 is ", schem2
               DISPLAY "name2 is ", name2
               MOVE 0 TO flag
             else
               DISPLAY "Row inserted into CHARACTER_SETS view is
      -    " correct"
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP CHARACTER SET test_set;"
      *  EXEC SQL DROP CHARACTER SET test_set;
             CALL "SUB11" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB12" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts788.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7522','pass','MCO');
               CALL "SUB13" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts788.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7522','fail','MCO');
               CALL "SUB14" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB15" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7522 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.13 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.