Quelle cdr008.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR008.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "CDR008.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1989/04/07 EMBEDDED COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * CDR008.PCO
      * WRITTEN BY: SUN DAJUN
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      *   THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
      * SQL.
      *
      * REFERENCES
      *       AMERICAN NATIONAL STANDARD database language - SQL
      *                          with Integrity Enhancement
      *
      *            SECTION 6.7 <referential constraint definition>
      *               <referential constraint definition>::=
      *                     FOREIGN KEY (<referencing columns>)
      *                     <references specification>
      *               <references specification>::=
      *                     REFERENCES <referenced table and columns>
      *               <referencing columns>::=
      *                       <reference column list>
      *               <refereced table and columns>::=
      *                       <table name>((<reference column list>
      *               <reference column list>::=
      *                       <column name>({,<column name>}...)
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  EMPNO1 PIC  X(3).
       01  uid PIC X(18).
       01  uidx PIC X(18).
           EXEC SQL END DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.

       01  code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).

       PROCEDURE DIVISION.
       P0.

           MOVE "SUN" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           EXEC SQL SELECT
                 USER INTO :uidx FROM SUN.ECCO END-EXEC
           if (uid NOT = uidx) then
             DISPLAY "ERROR: User " uid " expected."
             DISPLAY "User " uidx " connected."
             DISPLAY " "
             STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, cdr008.pco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
      ******************** BEGIN TEST0323 *******************

      *This test  inserts  a row  (E1,P1,40) in FOREIGN KEY
      *TABLE -- WORKS3, there have been such value (*,P1,*)
      *in WORKS3

           DISPLAY " TEST0323 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM WORKS3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM PROJ3;"
           DISPLAY  " "
           DISPLAY " INSERT INTO PROJ3"
           DISPLAY " VALUES
      -    " ('P1','MASS','Design',10000,'Deale');"
           DISPLAY  " "
           DISPLAY " INSERT INTO STAFF3"
           DISPLAY " SELECT * FROM STAFF;"
           DISPLAY  " "
           DISPLAY " INSERT INTO WORKS3"
           DISPLAY " VALUES ('E1','P1',40);"
           DISPLAY  " "
           DISPLAY " INSERT INTO WORKS3"
           DISPLAY " VALUES ('E2','P1',40);"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO:count1"
           DISPLAY " FROM WORKS3;"
           EXEC SQL DELETE  FROM WORKS3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM STAFF3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM PROJ3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO PROJ3
             VALUES ('P1','MASS','Design',10000,'Deale') END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO STAFF3
             SELECT * FROM STAFF END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO WORKS3
             VALUES ('E1','P1',40) END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO WORKS3
             VALUES ('E2','P1',40) END-EXEC
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           EXEC SQL SELECT COUNT(*) INTO:count1
             FROM WORKS3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " SQLCODE is equal to 0."
           DISPLAY " count1 is 2"
           DISPLAY " Your answer is :"
           DISPLAY " SQLCOD of second insert is ", code1
           DISPLAY " count1 is ", count1
           if (code1  =  0  AND  count1  =  2) then
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0323','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0323','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr008.pco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0323 ************************

      ******************** BEGIN TEST0324 *******************
      *This test  inserts   rows into FOREIGN KEY
      *TABLE -- WORKS3, there have been such a row
      *(P1,-,-,-,-) in PROJ,but no (P2,-,-,-,-) in PROJ

           DISPLAY " TEST0324 "
           DISPLAY " PRIMARY KEY & FOREIGN KEY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM WORKS3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM PROJ3;"
           DISPLAY  " "
           DISPLAY " INSERT INTO PROJ3"
           DISPLAY " VALUES
      -    " ('P1','MASS','Design',10000,'Deale');"
           DISPLAY  " "
           DISPLAY " INSERT INTO STAFF3"
           DISPLAY " SELECT * FROM STAFF;"
           DISPLAY  " "
           DISPLAY " INSERT INTO WORKS3"
           DISPLAY " VALUES ('E1','P1',40);"
           DISPLAY  " "
           DISPLAY " INSERT INTO WORKS3"
           DISPLAY " VALUES ('E2','P2',40);"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*) INTO:count1"
           DISPLAY " FROM WORKS3"
           DISPLAY " WHERE PNUM = 'P2';"
           COMPUTE count1 = -1
           EXEC SQL DELETE  FROM WORKS3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM STAFF3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM PROJ3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO PROJ3
             VALUES ('P1','MASS','Design',10000,'Deale') END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO STAFF3
             SELECT * FROM STAFF END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO WORKS3
             VALUES ('E1','P1',40) END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO WORKS3
             VALUES ('E2','P2',40) END-EXEC
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           EXEC SQL SELECT COUNT(*) INTO:count1
             FROM WORKS3
             WHERE PNUM = 'P2' END-EXEC
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " SQLCODE is less than 0."
           DISPLAY " count1 is 0"
           DISPLAY " Your answer is :"
           DISPLAY " SQLCOD of second insert is ", code1
           DISPLAY " count1 is ", count1
           if (code1  <  0  AND  count1  =  0) then
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0324','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0324','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr008.pco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0324 ************************

      ******************** BEGIN TEST0325 *********************
      *This test deletes a row (E1,-,-,-) from PRIMARY KEY
      *TABLE -- STAFF3, but there are such rows (E1,*,*) in
      *FOREIGN KEY TABLE -- WORK3, this should be an ERROR.

           DISPLAY " TEST0325 "
           DISPLAY " REFERENTIAL INTEGRITY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM WORKS3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM PROJ3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF3;"
           DISPLAY  " "
           DISPLAY " INSERT INTO STAFF3"
           DISPLAY " SELECT * FROM STAFF;"
           DISPLAY  " "
           DISPLAY " INSERT INTO PROJ3"
           DISPLAY " SELECT * FROM PROJ;"
           DISPLAY  " "
           DISPLAY " INSERT INTO WORKS3"
           DISPLAY " SELECT * FROM WORKS;"
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF3"
           DISPLAY " WHERE EMPNUM='E1';"
           DISPLAY  " "
           DISPLAY "code1 = SQLCODE"
           DISPLAY  " "
           DISPLAY " SELECT EMPNUM INTO :EMPNO1"
           DISPLAY " FROM STAFF3"
           DISPLAY " WHERE EMPNUM = 'E1';"
           EXEC SQL DELETE  FROM WORKS3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM PROJ3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM STAFF3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO STAFF3
             SELECT * FROM STAFF END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO PROJ3
             SELECT * FROM PROJ END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO WORKS3
             SELECT * FROM WORKS END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE FROM STAFF3
             WHERE EMPNUM='E1' END-EXEC
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           MOVE "NV" TO EMPNO1
           EXEC SQL SELECT EMPNUM INTO :EMPNO1
             FROM STAFF3
             WHERE EMPNUM = 'E1' END-EXEC
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct result is code1 not equal to 0"
           DISPLAY " Your answer is code1=", code1
           if (code1  NOT =  0  AND  EMPNO1   =   "E1") then
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0325','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0325','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr008.pco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD
      ****************** END TEST0325 ********************

      ******************** BEGIN TEST0326 *********************
      *This test set a row (E1,-,-,-) in PRIMARY KEY TABLE
      *-- STAFF3 to (E9,-,-,-), there is no such a row
      *(E1,*,*) in FOREIGN KEY TABLE -- WORK3.

           DISPLAY " TEST0326 "
           DISPLAY " REFERENTIAL INTEGRITY "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.5,6.6,6.7"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM WORKS3;"
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF3;"
           DISPLAY  " "
           DISPLAY " INSERT INTO STAFF3"
           DISPLAY " SELECT * FROM STAFF;"
           DISPLAY  " "
           DISPLAY " UPDATE STAFF3"
           DISPLAY " SET EMPNUM = 'E9'"
           DISPLAY " WHERE EMPNUM = 'E1';"
           DISPLAY  " "
           DISPLAY "code1 = SQLCODE"
           DISPLAY  " "
           DISPLAY " SELECT EMPNUM INTO :EMPNO1"
           DISPLAY " FROM STAFF3"
           DISPLAY " WHERE EMPNUM = 'E1';"
           EXEC SQL DELETE  FROM WORKS3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL DELETE  FROM STAFF3 END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL INSERT INTO STAFF3
             SELECT * FROM STAFF END-EXEC
           MOVE SQLCODE TO SQL-COD
           EXEC SQL UPDATE STAFF3
             SET EMPNUM = 'E9'
             WHERE EMPNUM = 'E1' END-EXEC
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
           MOVE "NV" TO EMPNO1
           EXEC SQL SELECT EMPNUM INTO :EMPNO1
             FROM STAFF3
             WHERE EMPNUM = 'E1' END-EXEC
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct result is code1 equal to 0"
           DISPLAY " Your answer is code1=", code1
           if (code1  =  0  AND  (EMPNO1   =   "NV")) then
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0326','pass','PCO') END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
             EXEC SQL INSERT INTO TESTREPORT
               VALUES('0326','fail','PCO') END-EXEC
             ADD 1 TO errcnt
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr008.pco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
           EXEC SQL COMMIT WORK END-EXEC
           MOVE SQLCODE TO SQL-COD
      ****************** END TEST0326 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

quality100%

¤ Dauer der Verarbeitung: 0.14 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.