Quelle dml126.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  DML126.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "DML126.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1994/7/1 EMBEDDED COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * DML126.PCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * This routine tests Dynamic SQL SQLSTATEs and F# 12.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.1 Transitional SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  dstmt PIC  X(50).
       01  ch1 PIC  X(10).
       01  ch2 PIC  X(10).
       01  cmd PIC  X(21).
       01  cmd2 PIC  X(21).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, dml126.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0660 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0660 "
             DISPLAY " Dynamic SQL SQLSTATEs"
             DISPLAY "References:"
             DISPLAY " F# 1 -- Dynamic SQL"
             DISPLAY " 22.1 -- SQLSTATE"
             DISPLAY " 17.6 GR.9.b"
             DISPLAY " 17.9 GR.5.a GR.6.a"
             DISPLAY " 17.10 GR.4"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *07003 cursor specification cannot be executed

      *This one cannot be generated in TSQL because first you have to
      *violate the syntactical leveling rule against specifying INTO
      *with an EXECUTE.

      *07005 prepared statement not a cursor specification
      *Before correction:  17.6 GR.9.b.ii
      *After correction:   17.6 GR.9.b.i

      *4.22 <dynamic declare cursor> is declarative - not executable
             DISPLAY "DECLARE C12611 CURSOR FOR S12611;"
             EXEC SQL DECLARE C12611 CURSOR FOR S12611 END-EXEC
             DISPLAY  " "

             DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES (?)"""
             MOVE "INSERT INTO CONCATBUF VALUES (?) "
             TO dstmt

      *07005 cannot be pushed back to the open (see above citation)

             DISPLAY "PREPARE S12611 FROM :dstmt;"
             EXEC SQL PREPARE S12611 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07005; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07005"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "OPEN C12611;"
             EXEC SQL OPEN C12611 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             if (SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 26000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "26000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "26000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE C12611;"
             EXEC SQL CLOSE C12611 END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "PREPARE S12613 FROM :dstmt;"
             EXEC SQL PREPARE S12613 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *07006 restricted data type attribute violation
      *See test 0658

      *07001 using clause does not match dynamic parameter specificati
      *17.9 GR.5.a

             MOVE "xxxxxxxxxx" TO ch1
             MOVE "xxxxxxxxxx" TO ch2

             DISPLAY "EXECUTE S12613 USING :ch1, :ch2;"
             EXEC SQL EXECUTE S12613 USING :ch1, :ch2 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07001; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07001"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *07002 using clause does not match target specifications
      *17.9 GR.6.a

             DISPLAY "dstmt=""SELECT * FROM HU.WORKS WHERE HOURS = ?"""
             MOVE "SELECT * FROM HU.WORKS WHERE HOURS = ?
      -    " " TO dstmt

             DISPLAY "PREPARE S12612 FROM :dstmt;"
             EXEC SQL PREPARE S12612 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE C12612 CURSOR FOR S12612;"
             EXEC SQL DECLARE C12612 CURSOR FOR S12612 END-EXEC
             DISPLAY  " "

             MOVE 12 TO int1
             DISPLAY "OPEN C12612 USING :int1;"
             EXEC SQL OPEN C12612 USING :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "FETCH C12612 INTO :ch1;"
             EXEC SQL FETCH C12612 INTO :ch1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07002; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07002"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C12612;"
             EXEC SQL CLOSE C12612 END-EXEC
             MOVE SQLCODE TO SQL-COD

      *07001 using clause does not match dynamic parameter specificati
      *17.9 GR.5.a

             MOVE 12 TO int1
             MOVE "xxxxxxxxxx" TO ch1
             DISPLAY "OPEN C12612 USING :int1, :ch1;"
             EXEC SQL OPEN C12612 USING :int1, :ch1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07001; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07001"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C12612;"
             EXEC SQL CLOSE C12612 END-EXEC
             MOVE SQLCODE TO SQL-COD

      *07004 using clause required for dynamic parameters
      *17.14 GR.3

             DISPLAY "OPEN C12612;"
             EXEC SQL OPEN C12612 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07004; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07004"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "CLOSE C12612;"
             EXEC SQL CLOSE C12612 END-EXEC
             MOVE SQLCODE TO SQL-COD

      *07004 using clause required for dynamic parameters
      *17.10 GR.4

             DISPLAY "EXECUTE S12613;"
             EXEC SQL EXECUTE S12613 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 07004; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "07004"  OR  SQLCODE  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *07007 using clause required for result fields

      *This one cannot be generated in TSQL because first you have to
      *violate the syntactical leveling rule against specifying INTO
      *with an EXECUTE.

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0660','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml126.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0660','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0660 ********************
      ******************** BEGIN TEST0670 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0670"
             DISPLAY " Diagnostics: COMMAND_FUNCTION (dynamic)"
             DISPLAY "References:"
             DISPLAY " F# 12 -- Get diagnostics"
             DISPLAY " 18.1 -- "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *ALLOCATE DESCRIPTOR

             DISPLAY "ALLOCATE DESCRIPTOR 'YAWL';"
             EXEC SQL ALLOCATE DESCRIPTOR 'YAWL' END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'ALLOCATE DESCRIPTOR '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "ALLOCATE DESCRIPTOR ") then
               MOVE 0 TO flag
             END-IF

      *SET DESCRIPTOR

             DISPLAY "SET DESCRIPTOR 'YAWL' COUNT = 1;"
             EXEC SQL SET DESCRIPTOR 'YAWL' COUNT = 1 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'SET DESCRIPTOR '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "SET DESCRIPTOR ") then
               MOVE 0 TO flag
             END-IF

      *PREPARE

             DISPLAY "dstmt=""SELECT HOURS FROM HU.WORKS"""
             MOVE "SELECT HOURS FROM HU.WORKS "
             TO dstmt

             DISPLAY "PREPARE S12621 FROM :dstmt;"
             EXEC SQL PREPARE S12621 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'PREPARE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "PREPARE ") then
               MOVE 0 TO flag
             END-IF

      *DESCRIBE

             DISPLAY "DESCRIBE S12621 USING SQL DESCRIPTOR 'YAWL';"
             EXEC SQL DESCRIBE S12621 USING SQL DESCRIPTOR 'YAWL'
             END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DESCRIBE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DESCRIBE ") then
               MOVE 0 TO flag
             END-IF

      *GET DESCRIPTOR

             DISPLAY "GET DESCRIPTOR 'YAWL' :int1 = COUNT;"
             EXEC SQL GET DESCRIPTOR 'YAWL' :int1 = COUNT END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'GET DESCRIPTOR '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "GET DESCRIPTOR ") then
               MOVE 0 TO flag
             END-IF

      *DEALLOCATE DESCRIPTOR

             DISPLAY "DEALLOCATE DESCRIPTOR 'YAWL';"
             EXEC SQL DEALLOCATE DESCRIPTOR 'YAWL' END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DEALLOCATE DESCRIPTOR'; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DEALLOCATE DESCRIPTOR") then
               MOVE 0 TO flag
             END-IF

      *DYNAMIC OPEN

             DISPLAY "DECLARE C12621 CURSOR FOR S12621;"
             EXEC SQL DECLARE C12621 CURSOR FOR S12621 END-EXEC

             DISPLAY "OPEN C12621;"
             EXEC SQL OPEN C12621 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DYNAMIC OPEN '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DYNAMIC OPEN ") then
               MOVE 0 TO flag
             END-IF

      *DYNAMIC FETCH

             DISPLAY "FETCH C12621 INTO :int1;"
             EXEC SQL FETCH C12621 INTO :int1 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DYNAMIC FETCH '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DYNAMIC FETCH ") then
               MOVE 0 TO flag
             END-IF

      *DYNAMIC UPDATE CURSOR

             DISPLAY "UPDATE HU.WORKS SET HOURS = 10"
             DISPLAY " WHERE CURRENT OF C12621;"
             EXEC SQL UPDATE HU.WORKS SET HOURS = 10
               WHERE CURRENT OF C12621 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DYNAMIC UPDATE CURSOR'; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DYNAMIC UPDATE CURSOR") then
               MOVE 0 TO flag
             END-IF

      *DYNAMIC DELETE CURSOR (<dynamic delete statement: positioned>)

             DISPLAY "DELETE FROM HU.WORKS WHERE CURRENT OF C12621;"
             EXEC SQL DELETE FROM HU.WORKS WHERE CURRENT OF C12621
             END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DYNAMIC DELETE CURSOR'; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DYNAMIC DELETE CURSOR") then
               MOVE 0 TO flag
             END-IF

      *DYNAMIC CLOSE

             DISPLAY "CLOSE C12621;"
             EXEC SQL CLOSE C12621 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DYNAMIC CLOSE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DYNAMIC CLOSE ") then
               MOVE 0 TO flag
             END-IF

      *EXECUTE

             DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES ('SPAM')"""
             MOVE "INSERT INTO CONCATBUF VALUES ('SPAM') "
             TO dstmt

             DISPLAY "PREPARE S12622 FROM :dstmt;"
             EXEC SQL PREPARE S12622 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "EXECUTE S12622;"
             EXEC SQL EXECUTE S12622 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'EXECUTE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "EXECUTE ") then
               MOVE 0 TO flag
             END-IF

      *EXECUTE IMMEDIATE

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'EXECUTE IMMEDIATE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "EXECUTE IMMEDIATE ") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0670','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml126.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0670','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0670 ********************
      ******************** BEGIN TEST0671 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0671"
             DISPLAY " Diagnostics: DYNAMIC_FUNCTION"
             DISPLAY "References:"
             DISPLAY " F# 12 -- Get diagnostics"
             DISPLAY " 18.1 -- "
             DISPLAY " TC #2 18.1 -- info from "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "INSERT INTO CONCATBUF VALUES ('AAA');"
             EXEC SQL INSERT INTO CONCATBUF VALUES ('AAA') END-EXEC
             DISPLAY  " "

      *SELECT

             DISPLAY "dstmt=""SELECT COUNT(*) FROM USIG"""
             MOVE "SELECT COUNT(*) FROM USIG
      -    " " TO dstmt

             DISPLAY "PREPARE S12631 FROM :dstmt;"
             EXEC SQL PREPARE S12631 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'SELECT '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "SELECT ") then
               MOVE 0 TO flag
             END-IF

      *Intentional repetition -- GET DIAGNOSTICS should not set diagno

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'SELECT '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "SELECT ") then
               MOVE 0 TO flag
             END-IF

      *DELETE WHERE

             DISPLAY "dstmt=""DELETE FROM CONCATBUF"""
             MOVE "DELETE FROM CONCATBUF "
             TO dstmt

             DISPLAY "PREPARE S12632 FROM :dstmt;"
             EXEC SQL PREPARE S12632 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DELETE WHERE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DELETE WHERE ") then
               MOVE 0 TO flag
             END-IF

      *INSERT

             DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES (?)"""
             MOVE "INSERT INTO CONCATBUF VALUES (?) "
             TO dstmt

             DISPLAY "PREPARE S12633 FROM :dstmt;"
             EXEC SQL PREPARE S12633 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'INSERT '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "INSERT ") then
               MOVE 0 TO flag
             END-IF

      *UPDATE WHERE

             DISPLAY "dstmt=""UPDATE CONCATBUF SET ZZ = ?"""
             MOVE "UPDATE CONCATBUF SET ZZ = ? "
             TO dstmt

             DISPLAY "PREPARE S12634 FROM :dstmt;"
             EXEC SQL PREPARE S12634 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'UPDATE WHERE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "UPDATE WHERE ") then
               MOVE 0 TO flag
             END-IF

      *Unrecognized statement:  TC #2 18.1
      *If your database recognizes FROB, change it to a command
      *that it doesn't recognize.  This should not be rejected at
      *compile time because it's Dynamic SQL.

             DISPLAY "dstmt=""FROB"""
             MOVE "FROB "
             TO dstmt

             DISPLAY "PREPARE S12635 FROM :dstmt;"
             EXEC SQL PREPARE S12635 FROM :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd2
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION,"
             DISPLAY " :cmd2 = COMMAND_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION,
               :cmd2 = COMMAND_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be ' '; its value
      -    " is '", cmd, "'"
             if (cmd  NOT  =   " ") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "cmd2 should be 'PREPARE '; its value
      -    " is '", cmd2, "'"
             if (cmd2  NOT  =   "PREPARE ") then
               MOVE 0 TO flag
             END-IF

      *Execute UPDATE WHERE

             MOVE "If an SQL-transaction" TO cmd
             DISPLAY "cmd = ", cmd

             DISPLAY "EXECUTE S12634 USING :cmd;"
             EXEC SQL EXECUTE S12634 USING :cmd END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'UPDATE WHERE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "UPDATE WHERE ") then
               MOVE 0 TO flag
             END-IF

      *Frob even faster
      *If your database recognizes FROB, change it to a command
      *that it doesn't recognize.  This should not be rejected at
      *compile time because it's Dynamic SQL.

             DISPLAY "dstmt=""FROB"""
             MOVE "FROB "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be ' '; its value
      -    " is '", cmd "'"
             if (cmd  NOT  =   " ") then
               MOVE 0 TO flag
             END-IF

      *Execute immediate INSERT

             DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES ('FNORD')"""
             MOVE "INSERT INTO CONCATBUF VALUES ('FNORD') "
             TO dstmt

             DISPLAY "EXECUTE IMMEDIATE :dstmt;"
             EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'INSERT '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "INSERT ") then
               MOVE 0 TO flag
             END-IF

      *Executed DELETE WHERE

             DISPLAY "EXECUTE S12632;"
             EXEC SQL EXECUTE S12632 END-EXEC
             MOVE SQLCODE TO SQL-COD

             MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
             DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
             EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cmd should be 'DELETE WHERE '; its value
      -    " is ", cmd
             if (cmd  NOT  =   "DELETE WHERE ") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0671','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " dml126.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0671','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0671 ********************
      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Dauer der Verarbeitung: 0.23 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.