Quelle mpa010.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  MPA010.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "MPA010.PCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1993/11/10 EMBEDDED COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * MPA010.PCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * This program tests <grant statement> and <revoke statement>
      * in non-dynamic SQL.  This is part A of a two-part
      * concurrency test.  It must be run as FLATER before MPB010 is
      * run as HU.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.1 Transitional SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  progno PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
             EXEC SQL END DECLARE SECTION END-EXEC
       01  pauze PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  repcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  fails PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  maxfls PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  oldtok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  waitin PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      * Debugging is turned on by setting debug1 = 1
       01  debug1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "FLATER " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Embedded COBOL, mpa010.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "This is part A of a two-part test. It should be
      -    " started"
             DISPLAY "BEFORE mpb010. Table TOKENS must exist in schema
      -    " HU."

      *to debug program, set debug1 = 1
             MOVE 0 TO debug1
             MOVE 1000 TO maxfls
             MOVE 1 TO pauze
      *This is not a concurrency test.
      *Using TEd, increase variable pauze if there is MAYDAY message.
             MOVE 10 TO progno

      ******************** BEGIN TEST0627 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0627 "
             DISPLAY " (static)"
             DISPLAY " This is program 'A'"
             DISPLAY "References:"
             DISPLAY " 11.36 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             MOVE 0 TO fails
             DISPLAY "Checking for extraneous tokens...."
           .
        P100.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P100"
             END-IF
             EXEC SQL SELECT COUNT(*) INTO :int1
               FROM HU.TOKENS WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  000
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P100
             END-IF
             if (int1  =  0) then
               GO TO P101
             END-IF

             MOVE 0 TO fails
             DISPLAY "Extraneous tokens found!"
           .
        P102.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P102"
             END-IF
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  001
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P102
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  002
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P102
             END-IF
             GO TO P199

      *No extraneous tokens

           .
        P101.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P101"
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "Program 'A' now starting work."
             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

      *may or may not exist
             DISPLAY "DROP TABLE GRANT010 RESTRICT;"
             EXEC SQL DROP TABLE GRANT010 RESTRICT END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "CREATE TABLE GRANT010 (C1 INT);"
             EXEC SQL CREATE TABLE GRANT010 (C1 INT) END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO GRANT010 VALUES (1);"
             EXEC SQL INSERT INTO GRANT010 VALUES (1) END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             MOVE 0 TO fails
             DISPLAY "Setting token = 1"
           .
        P103.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P103"
             END-IF
             EXEC SQL INSERT INTO HU.TOKENS VALUES (:progno, 1) END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  003
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P103
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  004
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P103
             END-IF

             DISPLAY "START PROGRAM B if you haven't already!"
             MOVE 2 TO waitin

           .
        P194.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P194"
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P104.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P104"
             END-IF
             COMPUTE int1 = -1
             EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
               WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  int1  NOT =  waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  005
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P104
             END-IF

      *Start new transaction because of GRANTs
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  2) then
               GO TO P196
             END-IF
             if (int1  =  4) then
               GO TO P190
             END-IF
             GO TO P197

      *token == 2
           .
        P196.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P196"
             END-IF
             DISPLAY "GRANT SELECT ON GRANT010 TO HU;"
             EXEC SQL GRANT SELECT ON GRANT010 TO HU END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 4 TO waitin
             GO TO P195

      *token == 4
           .
        P190.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P190"
             END-IF
             DISPLAY "GRANT ALL PRIVILEGES ON GRANT010 TO HU;"
             EXEC SQL GRANT ALL PRIVILEGES ON GRANT010 TO HU END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 6 TO waitin

           .
        P195.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P195"
             END-IF
             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P193.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P193"
             END-IF
             EXEC SQL UPDATE HU.TOKENS SET TOKEN_NO = TOKEN_NO + 1
               WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  006
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  007
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P194

      *token == 6
           .
        P197.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P197"
             END-IF
             DISPLAY "Killing token and finishing up."
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  008
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P197
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0627','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpa010.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0627','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
      ******************** END TEST0627 ********************
      ******************** BEGIN TEST0628 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0628 "
             DISPLAY " (static)"
             DISPLAY " This is program 'A'"
             DISPLAY "References:"
             DISPLAY " 11.37 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             MOVE 0 TO fails
             DISPLAY "Checking for extraneous tokens...."
           .
        P160.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P160"
             END-IF
             EXEC SQL SELECT COUNT(*) INTO :int1
               FROM HU.TOKENS WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  009
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P160
             END-IF
             if (int1  =  0) then
               GO TO P161
             END-IF

             MOVE 0 TO fails
             DISPLAY "Extraneous tokens found!"
           .
        P162.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P162"
             END-IF
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  010
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P162
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  011
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P162
             END-IF
             GO TO P199

      *No extraneous tokens

           .
        P161.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P161"
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "Program 'A' now starting work."

             DISPLAY "REVOKE SELECT, UPDATE, DELETE ON GRANT010 FROM HU
      -    " CASCADE;"
             EXEC SQL REVOKE SELECT, UPDATE, DELETE ON GRANT010 FROM HU
             CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             MOVE 0 TO fails
             DISPLAY "Setting token = 1"
           .
        P163.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P163"
             END-IF
             EXEC SQL INSERT INTO HU.TOKENS VALUES (:progno, 1) END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  012
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P163
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  013
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P163
             END-IF

             DISPLAY "START PROGRAM B if you haven't already!"
             MOVE 2 TO waitin

           .
        P164.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P164"
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P165.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P165"
             END-IF
             COMPUTE int1 = -1
             EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
               WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  int1  NOT =  waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  014
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P165
             END-IF

      *Start new transaction because of REVOKEs
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  2) then
               GO TO P166
             END-IF
             GO TO P167

      *token == 2
           .
        P166.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P166"
             END-IF
             DISPLAY "REVOKE ALL PRIVILEGES ON GRANT010 FROM HU
      -    " CASCADE;"
             EXEC SQL REVOKE ALL PRIVILEGES ON GRANT010 FROM HU CASCADE
             END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 4 TO waitin

           .
        P168.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P168"
             END-IF
             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P169.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P169"
             END-IF
             EXEC SQL UPDATE HU.TOKENS SET TOKEN_NO = TOKEN_NO + 1
               WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  015
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P169
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  016
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P169
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P164

      *token == 4
           .
        P167.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P167"
             END-IF
             DISPLAY "Killing token and finishing up."
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  017
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P167
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0628','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpa010.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0628','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
      ******************** END TEST0628 ********************
      ******************** BEGIN TEST0560 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0560 "
             DISPLAY " Table privileges vs. column privileges"
             DISPLAY " This is program 'A'"
             DISPLAY "References:"
             DISPLAY " 11.37 "
             DISPLAY " F# 3 -- Basic schema manipulation"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             MOVE 0 TO fails
             DISPLAY "Checking for extraneous tokens...."
           .
        P150.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P150"
             END-IF
             EXEC SQL SELECT COUNT(*) INTO :int1
               FROM HU.TOKENS WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  018
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P150
             END-IF
             if (int1  =  0) then
               GO TO P151
             END-IF

             MOVE 0 TO fails
             DISPLAY "Extraneous tokens found!"
           .
        P152.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P152"
             END-IF
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  019
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P152
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  020
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P152
             END-IF
             GO TO P199

      *No extraneous tokens

           .
        P151.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P151"
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "Program 'A' now starting work."

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "CREATE TABLE X (A INT, B INT, C INT);"
             EXEC SQL CREATE TABLE X (A INT, B INT, C INT) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "GRANT SELECT, UPDATE ON X TO HU;"
             EXEC SQL GRANT SELECT, UPDATE ON X TO HU END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "REVOKE UPDATE (B) ON X FROM HU CASCADE;"
             EXEC SQL REVOKE UPDATE (B) ON X FROM HU CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *11.11 GR 3 creates privilege descriptors on D for HU
             DISPLAY "ALTER TABLE X ADD D INT;"
             EXEC SQL ALTER TABLE X ADD D INT END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO X VALUES (1, 2, 3, 4);"
             EXEC SQL INSERT INTO X VALUES (1, 2, 3, 4) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             MOVE 0 TO fails
             DISPLAY "Setting token = 1"
           .
        P153.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P153"
             END-IF
             EXEC SQL INSERT INTO HU.TOKENS VALUES (:progno, 1) END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  021
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P153
             END-IF
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  022
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P153
             END-IF

             DISPLAY "START PROGRAM B if you haven't already!"
             MOVE 2 TO waitin

           .
        P154.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P154"
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P155.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P155"
             END-IF
             COMPUTE int1 = -1
             EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
               WHERE PROG_NO = :progno END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  int1  NOT =  waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  023
               PERFORM SLEEEP THRU P133
               EXEC SQL ROLLBACK WORK END-EXEC
               MOVE SQLCODE TO SQL-COD
               GO TO P155
             END-IF

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      *token == 2
             DISPLAY "Killing token and finishing up."
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP TABLE X CASCADE;"
             EXEC SQL DROP TABLE X CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0560','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpa010.pco *** fail *** "
               EXEC SQL INSERT INTO HU.TESTREPORT
                 VALUES('0560','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             EXEC SQL COMMIT WORK END-EXEC
             DISPLAY "==============================================="

      ******************** END TEST0560 ********************
           STOP RUN.

        P198.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P198"
             END-IF
             DISPLAY "CARDINALITY VIOLATION"
           .
        P199.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P199"
             END-IF
             if (fails  >  maxfls)  then
               DISPLAY "The number of attempts (fails) exceeds variable
      -    " maxfls."
               DISPLAY "Increase the value of variable maxfls, if
      -    " needed."
               DISPLAY "Or, increase the value of variable pauze."
             END-IF
             DISPLAY "MAYDAY MAYDAY PROGRAM ABORTING"
             DISPLAY "You will have to start this test over."
             DISPLAY "Trying to kill token (no retries)...."
             EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
             END-EXEC
             EXEC SQL COMMIT WORK END-EXEC
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

       SLEEEP.
             COMPUTE repcnt = fails * pauze
             if (repcnt  >  17) then
               COMPUTE repcnt = repcnt * repcnt
             END-IF
             MOVE 1 TO iii
           .
       P133.
             EXEC SQL COMMIT WORK END-EXEC
             COMPUTE int1 = -1
             EXEC SQL UPDATE HU.STAFF
               SET GRADE = -1 WHERE GRADE = :int1 END-EXEC
             COMPUTE iii = iii + 1
             if (iii  <  repcnt) then
               GO TO P133
             END-IF
             .

quality92%

¤ Dauer der Verarbeitung: 0.41 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.