Quelle xts727.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  XTS727.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "XTS727.PCO")

      *Copyright 1995 National Computing Centre Limited
      *and Computer Logic R&D S.A
      *on behalf of the CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * XTS727.PCO
      * WRITTEN BY: Vassilis Kogakis
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * Flagging - FULL SQL - <explicit table> in <query expression>
      *
      * REFERENCES
      *   7.10 -- <query expression>
      *   7.10 SR.2
      *   7.10 SR.5b
      *   7.10 LR.1b -- Intermediate SQL restriction which prohibits
      *                 the use of <explicit table> in a <simple
      *                 table> in a <query expression>
      *   F#37 -- Intermediate SQL Flagging.
      *
      * DATE LAST ALTERED  09/02/96 Alpha Release V1.0
      *
      * Cleanups and fixes by V. Kogakis 09/02/96
      *
      * Rewritten by V. Kogakis on 09/02/96
      *
      * Revised by DWF 1996-02-14
      *    Fixed char string lengths
      *    Fixed refs to non-existent columns
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  c_num1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  c_num2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  c_ch1 PIC  X(10).
       01  c_ch2 PIC  X(10).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, xts727.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7027 *******************
             MOVE 1 TO flag
             DISPLAY " TEST7027"
             DISPLAY " Flagging - Full SQL - in
      -    " exprssn>"
             DISPLAY " References "
             DISPLAY " 7.10 -- "
             DISPLAY " 7.10 SR.2"
             DISPLAY " 7.10 SR.5b"
             DISPLAY " 7.10 LR.1b Intermediate SQL restriction which
      -    " prohibits the"
             DISPLAY " use of on a
      -    " expression> "
             DISPLAY " F#37 -- Intermediate SQL Flagging."
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *Initialise error reporting variables
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *initialise host variables
             MOVE "xxxxxxxxxx" TO c_ch1
             MOVE "xxxxxxxxxx" TO c_ch2
             MOVE 0 TO c_num1
             MOVE 0 TO c_num2
             MOVE 0 TO coun

      *Insert into TEST6840C all rows from table CL_STANDARD
             DISPLAY "INSERT INTO TEST6840C"
             DISPLAY "TABLE CL_STANDARD;"
             EXEC SQL INSERT INTO TEST6840C
               TABLE CL_STANDARD END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT COUNT(*) INTO :coun FROM TEST6840C;"
             EXEC SQL SELECT COUNT(*) INTO :coun FROM TEST6840C END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "Coun should be 5; its value is: ", coun
             if (coun  NOT =  5) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *now check if all rows were inserted  correctly
      *First row
             DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
             DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
             DISPLAY "FROM TEST6840C"
             DISPLAY "WHERE NUM_C1 = 1000;"
             EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
               INTO :c_num1,:c_ch1,:c_num2,:c_ch2
               FROM TEST6840C
               WHERE NUM_C1 = 1000 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
      *check results returned by the <query specification>*
             DISPLAY "NUM_C1 should be 1000; it is : ", c_num1
             DISPLAY "CH_C1 should be NICKOS; it is : ", c_ch1
             DISPLAY "NUM_C2 should be 4000; it is : ", c_num2
             DISPLAY "CH_C2 should be ATHENS; it is : ", c_ch2
             if (c_ch1  NOT  =   "NICKOS"  OR  c_ch2  NOT  =   "ATHENS")
             then
               MOVE 0 TO flag
             END-IF
             if (c_num2  NOT =  4000  OR  c_num1  NOT =  1000)    then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *initialise host variables
             MOVE "xxxxxxxxxx" TO c_ch1
             MOVE "xxxxxxxxxx" TO c_ch2
             MOVE 0 TO c_num1
             MOVE 0 TO c_num2

      *Second row
             DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
             DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
             DISPLAY "FROM TEST6840C"
             DISPLAY "WHERE NUM_C1 = 1001;"
             EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
               INTO :c_num1,:c_ch1,:c_num2,:c_ch2
               FROM TEST6840C
               WHERE NUM_C1 = 1001 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
      *check results returned by the <query specification>*
             DISPLAY "NUM_C1 should be 1001; it is : ", c_num1
             DISPLAY "CH_C1 should be MARIA; it is : ", c_ch1
             DISPLAY "NUM_C2 should be 4001; it is : ", c_num2
             DISPLAY "CH_C2 should be RHODES; it is : ", c_ch2
             if (c_ch1  NOT  =   "MARIA"  OR  c_ch2  NOT  =   "RHODES")
             then
               MOVE 0 TO flag
             END-IF
             if (c_num2  NOT =  4001  OR  c_num1  NOT =  1001) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *initialise host variables
             MOVE "xxxxxxxxxx" TO c_ch1
             MOVE "xxxxxxxxxx" TO c_ch2
             MOVE 0 TO c_num1
             MOVE 0 TO c_num2

      *Third row
             DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
             DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
             DISPLAY "FROM TEST6840C"
             DISPLAY "WHERE NUM_C1 = 1002;"
             EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
               INTO :c_num1,:c_ch1,:c_num2,:c_ch2
               FROM TEST6840C
               WHERE NUM_C1 = 1002 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
      *check results returned by the <query specification>*
             DISPLAY "NUM_C1 should be 1002; it is : ", c_num1
             DISPLAY "CH_C1 should be MAKIS; it is : ", c_ch1
             DISPLAY "NUM_C2 should be 4002; it is : ", c_num2
             DISPLAY "CH_C2 should be HANIA; it is : ", c_ch2
             if (c_ch1  NOT  =   "MAKIS"  OR  c_ch2  NOT  =   "HANIA")
             then
               MOVE 0 TO flag
             END-IF
             if (c_num2  NOT =  4002  OR  c_num1  NOT =  1002) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *initialise host variables
             MOVE "xxxxxxxxxx" TO c_ch1
             MOVE "xxxxxxxxxx" TO c_ch2
             MOVE 0 TO c_num1
             MOVE 0 TO c_num2

      *Forth row
             DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
             DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
             DISPLAY "FROM TEST6840C"
             DISPLAY "WHERE NUM_C1 = 1003;"
             EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
               INTO :c_num1,:c_ch1,:c_num2,:c_ch2
               FROM TEST6840C
               WHERE NUM_C1 = 1003 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
      *check results returned by the <query specification>*
             DISPLAY "NUM_C1 should be 1003; it is : ", c_num1
             DISPLAY "CH_C1 should be GEORGE; it is : ", c_ch1
             DISPLAY "NUM_C2 should be 4003; it is : ", c_num2
             DISPLAY "CH_C2 should be ARTA; it is : ", c_ch2
             if (c_ch1  NOT  =   "GEORGE"  OR  c_ch2  NOT  =   "ARTA")
             then
               MOVE 0 TO flag
             END-IF
             if (c_num2  NOT =  4003  OR  c_num1  NOT =  1003) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *initialise host variables
             MOVE "xxxxxxxxxx" TO c_ch1
             MOVE "xxxxxxxxxx" TO c_ch2
             MOVE 0 TO c_num1
             MOVE 0 TO c_num2

      *Fifth row
             DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
             DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
             DISPLAY "FROM TEST6840C"
             DISPLAY "WHERE NUM_C1 = 1004;"
             EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
               INTO :c_num1,:c_ch1,:c_num2,:c_ch2
               FROM TEST6840C
               WHERE NUM_C1 = 1004 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
      *check results returned by the <query specification>*
             DISPLAY "NUM_C1 should be 1004; it is : ", c_num1
             DISPLAY "CH_C1 should be MORRIS; it is : ", c_ch1
             DISPLAY "NUM_C2 should be 4004; it is : ", c_num2
             DISPLAY "CH_C2 should be PARGA; it is : ", c_ch2
             if (c_ch1  NOT  =   "MORRIS"  OR  c_ch2  NOT  =   "PARGA")
             then
               MOVE 0 TO flag
             END-IF
             if (c_num2  NOT =  4004  OR  c_num1  NOT =  1004) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *restore table CL_STANDARD in its original state
             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *record results

             if ( flag  =  1 ) then
               DISPLAY " xts727.pco *** pass *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7027','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               DISPLAY "Intermediate SQL extension"
               DISPLAY "Explicit table in "
               DISPLAY "executed successfully."
               DISPLAY "Vendor must demonstrate Intermediate Flagger
      -    " WARNING"
             else
               DISPLAY " xts727.pco *** NOGO *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7027','NOGO','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               DISPLAY "Vendor does not support fully "
               DISPLAY "Intermediate SQL extension "
               DISPLAY "Support explicit table in query expression is
      -    " not required"
             END-IF
             DISPLAY "========================================"

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7027 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.0.14Bemerkung: (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.