Quelle xts753.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  XTS753.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * EMBEDDED COBOL (file "XTS753.PCO")

      *Copyright 1995 National Computing Centre Limited
      *and Computer Logic R&D S.A
      *on behalf of the CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * XTS753.PCO
      * WRITTEN BY: Nickos Backalidis
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *
      * ALTER TABLE ADD COLUMN WITH data type
      *
      * REFERENCES
      *   11.10   -- <Alter table statement>
      *   11.10 AR.1
      *   11.11   -- <Add column definition>
      *   11.1 GR.1
      *   F#1     -- Dynamic SQL
      *   F#2     -- Basic Information Schema
      *   F#38    -- Schema manipulation
      *
      * DATE LAST ALTERED  18/12/95 CTS5 Hand-over Test
      *
      * Cleanups and fixes by V. Kogakis 15/12/95
      *        Print timestamp
      *        Include Files
      *        Define NOSUBCLASS/CHCKOK at test beginning
      *
      * QA STATUS : QA CHECK
      *
      * Revised by DWF 1996-02-16
      *   Removed status checks after cursor declaration
      *   Removed field widths in printfs
      *   Matched printout with statements
      *   Fixed SDL transactions
      *   Fixed char string lengths
      *   Removed coding rules violations
      *   Fixed C coding errors
      ****************************************************************

           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  c1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  c2 PIC  X(10).
       01  c3 PIC  X(10).
       01  c4 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  c5 PIC  X(7).
       01  coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, xts753.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7053 *******************
             MOVE 1 TO flag
             DISPLAY " TEST7053"
             DISPLAY " ALTER TABLE ADD COLUMN WITH "
             DISPLAY " References:"
             DISPLAY " 11.10 -- "
             DISPLAY " 11.10 AR.1 "
             DISPLAY " 11.11 -- "
             DISPLAY " 11.11 GR.1 "
             DISPLAY " F#2 -- Basic Information Schema "
             DISPLAY " F#38 -- Schema manipulation "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *initialise error reporting variables
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *create a table under the current schema
             DISPLAY "CREATE TABLE TAB753"
             DISPLAY "(COL1 DECIMAL(4),"
             DISPLAY " COL2 CHAR(10),"
             DISPLAY " COL3 CHAR(10));"
             EXEC SQL CREATE TABLE TAB753
               (COL1 DECIMAL(4),
               COL2 CHAR(10),
               COL3 CHAR(10)) END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *now alter the table definition
             DISPLAY "ALTER TABLE TAB753 ADD COLUMN COL4 NUMERIC(7);"
             EXEC SQL ALTER TABLE TAB753 ADD COLUMN COL4 NUMERIC(7)
             END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise host variable
             MOVE 0 TO coun

      *Access the COLUMNS view from the INFORMATION SCHEMA
      *and check that column COL4 is present
             DISPLAY "SELECT COUNT(*) INTO :coun"
             DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS "
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME =
      -    " 'TAB753'"
             DISPLAY "AND COLUMN_NAME = 'COL4';"
             EXEC SQL SELECT COUNT(*) INTO :coun FROM
             INFORMATION_SCHEMA.COLUMNS
               WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME = 'TAB753'
               AND COLUMN_NAME = 'COL4' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             if (coun  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Alter again the table definition
             DISPLAY "ALTER TABLE TAB753 ADD COLUMN COL5 VARCHAR(7);"
             EXEC SQL ALTER TABLE TAB753 ADD COLUMN COL5 VARCHAR(7)
             END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Access the COLUMNS view from the INFORMATION SCHEMA
      *and check that column COL5 is present
             MOVE 0 TO coun
             DISPLAY "SELECT COUNT(*) INTO :coun"
             DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS "
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME =
      -    " 'TAB753'"
             DISPLAY "AND COLUMN_NAME = 'COL5';"
             EXEC SQL SELECT COUNT(*) INTO :coun FROM
             INFORMATION_SCHEMA.COLUMNS
               WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME = 'TAB753'
               AND COLUMN_NAME = 'COL5' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             if (coun  NOT =  1) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *add two rows in the table and observe behaviour
             DISPLAY "INSERT INTO TAB753
      -    " VALUES(1000,'PHONE','NICKOS',12000,'blue');"
             EXEC SQL INSERT INTO TAB753
             VALUES(1000,'PHONE','NICKOS',12000,'blue') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TAB753
      -    " VALUES(1001,'HULME','CHEADLE',12001,'velvet');"
             EXEC SQL INSERT INTO TAB753
             VALUES(1001,'HULME','CHEADLE',12001,'velvet') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DECLARE A CURSOR FOR SELECT
      -    " COL1,COL2,COL3,COL4,COL5"
             DISPLAY "FROM TAB753"
             DISPLAY "ORDER BY COL1;"
             EXEC SQL DECLARE A CURSOR FOR SELECT
             COL1,COL2,COL3,COL4,COL5
               FROM TAB753
               ORDER BY COL1 END-EXEC

             DISPLAY "OPEN A;"
             EXEC SQL OPEN A END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise host variables
             MOVE 0 TO c1
             MOVE 0 TO c4
             MOVE "xxxxxxxxxx" TO c2
             MOVE "xxxxxxxxxx" TO c3
             MOVE "xxxxxxx" TO c5

             DISPLAY "FETCH A INTO :c1,:c2,:c3,:c4,:c5;"
             EXEC SQL FETCH A INTO :c1,:c2,:c3,:c4,:c5 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "c1 should be 1000; its value is ", c1
             DISPLAY "c2 should be PHONE; its value is ", c2
             DISPLAY "c3 should be NICKOS; its value is ", c3
             DISPLAY "c4 should be 12000; its value is ", c4
             DISPLAY "c5 should be blue; its value is ", c5
             if (c1 NOT = 1000  OR  c2  NOT  =   "PHONE"  OR  c3  NOT  =
               "NICKOS") then
               MOVE 0 TO flag
             END-IF
             if (c4  NOT = 12000  OR  c5  NOT  =   "blue") then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

      *initialise host variables
             MOVE 0 TO c1
             MOVE 0 TO c4
             MOVE "xxxxxxxxxx" TO c2
             MOVE "xxxxxxxxxx" TO c3
             MOVE "xxxxxxx" TO c5

             DISPLAY "FETCH A INTO :c1,:c2,:c3,:c4,:c5;"
             EXEC SQL FETCH A INTO :c1,:c2,:c3,:c4,:c5 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "c1 should be 1001; its value is ", c1
             DISPLAY "c2 should be HULME; its value is ", c2
             DISPLAY "c3 should be CHEADLE; its value is ", c3
             DISPLAY "c4 should be 12001; its value is ", c4
             DISPLAY "c5 should be velvet; its value is ", c5
             if (c1 NOT = 1001  OR  c2  NOT  =   "HULME"  OR  c3  NOT  =
               "CHEADLE") then
               MOVE 0 TO flag
             END-IF
             if (c4  NOT = 12001  OR  c5  NOT  =   "velvet") then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE A;"
             EXEC SQL CLOSE A END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Drop the table

             DISPLAY "DROP TABLE TAB753 CASCADE;"
             EXEC SQL DROP TABLE TAB753 CASCADE END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *record results

             if ( flag  =  1 ) then
               DISPLAY " xts753.pco *** pass *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7053','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " xts753.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7053','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7053 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.0.13Bemerkung: (vorverarbeitet) ¤

*Bot Zugriff

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.